Thank you for your time here. My Eahora ebike uses the same display controller.

Excellent video. We just bought our Lectrics a couple months ago. Now I know exactly how to set mine. Thank a bunch.

@PedalWithPower

2 жыл бұрын

Your very welcome. It's a little easier when you know what each setting does in the real world.

Setting the Pedal Asssist Sensitivity at most sensitive is what made me enjoy the bike.

@PedalWithPower

2 жыл бұрын

Glad to hear it!

Man, you know this bike inside and out. Your videos are so informative.

@PedalWithPower

2 жыл бұрын

Thanks Glenn! Glad you're liking them 👍I'll keep adding more

You really have helped me and thousands of people with this. Thank you.

I’ve searched for a month trying to find a video like this. Your advice also works for my Aventon Level. Yours is the most comprehensive and best if found. Thank You friend!!

@PedalWithPower

2 жыл бұрын

Thanks Mark, that's awesome and welcome to Pedal With Power!👍

great video, I needed help to get the power kicking in---sorted!

Thanks!!! My bike should be here tomorrow. Exactly what I needed.

Awesome video. Thanks for the information. Just got my bike 2 days ago and I've learned a lot from your video

I just got my XP 3.0 today. It doesn't come with a paper manual. Stupid. So KZread to the rescue it was. I will watch this video a few more times to get everything I need to know. I really appreciate you sharing your knowledge. All I got to do is let the battery charge and get out riding! Thank you!

Great job on this video. Cleared up a few things for me.

The 'TRUTH' REVIEWER! GREAT AND HONEST REVIEW. THANK YOU

Great video! Thanks for going over all the details of each setting.

@PedalWithPower

2 жыл бұрын

No problem, it took some trial and error for me to figure them all out. Hope it helps!

Excellent Screen explanation. Great job!

Fantastic Video. I re-watched it and made my own chart so I can remember all this! thank you.

Very informative thank you sir.

Great job! I’m learning this bike now. Great information! Thanks!😀🚴

@PedalWithPower

2 жыл бұрын

Thanks Jean. Glad it was helpful!

Thanks. That's the best explanation of the control settings that I've seen

Great demo, helped me understand the interface a little better on my bike, which is almost exactly the same controller in terms of menu items. (Aurochs XT10)

@PedalWithPower

2 жыл бұрын

No problem, always helps me to just go out and try everything. Thanks 👍

Excellent video. Even though I have the original XP, I learned a lot. One major difference ~ the original XP tire setting is fixed at 22. It can’t be changed. Too bad since it’s inaccurate, and I believe bumping it up to 24 or 24.5 would make speed and distance more accurate.

Big help on my bike. Ty!

Thanks for all the information! It was great!😀🚴🚴🚴

@PedalWithPower

2 жыл бұрын

Thanks for watching, Jean! 😀

Hi, couple of comments based on my experience with the two XP2.0st bikes we bought last Christmas. (1) The single most important thing to improve these bikes is installing an 11-34 freewheel for added capability at both the low and high end of speeds. I discovered that the derailleur settings stayed the same, except for turning the "B screw" clockwise a turn or so to accommodate the larger first gear. Chain length fine. (2) When adjusting a setting on the LCD screen it is not necessary to manually do the "+/-" thing. The computer will automatically lock in the new setting and get out of the settings mode after about 5 seconds. Likewise, it is not necessary to turn off and then back on the LCD to lock in the new setting. (3) When the LCD times out you will lose your trip meter value. And the system draws so little power from the big battery I just set it to 60 (minutes) so it stays on for my typical trip uses. (4) In calibrating with a GPS speedometer I've found a value of about 24.5 makes the Lectric speedometer pretty accurate. I know, it doesn't seem to make any sense because that's not the tire size. I think there are other internal calibrations that the factory made such that "tire size" is inaccurate. No big deal. Finally, I am not at all concerned with top speeds. Keep in mind that in Europe they are limited to 15mph. I've personally concluded that 10-15mph is plenty good for my needs when puttering around suburban roads and in town. 28mph is tempting fate around cars, pedestrians, and opening car doors. It's a bicycle, not a motorcycle.

@PedalWithPower

2 жыл бұрын

Thanks again Richard for all the useful info. The settings on/off thing is only for setting the speed, all the rest will set when you change them. 👍

Very informative. Thank you.

Most helpful video thank you.

Thank you this has been very helpful!!!

@PedalWithPower

2 жыл бұрын

You're very welcome, thanks for watching!

Great video. So many details around the settings I wasn't even aware of. I will read the owner manual as well, but also good to see a real example of how the settings translate to performance. My XP 2.0 arrives this week and can't wait.

@PedalWithPower

2 жыл бұрын

Thanks Tom, much appreciated! Waiting for your bike to arrive is tough, but soon you'll be riding around and having a blast 👍

Chris just got my bike ! That's for all you do !

@PedalWithPower

2 жыл бұрын

Congrats! Ebikes are so cool, I hope you love it

Thanks so much for helping me. By mistake i turned off the petal assist and i had the throttle only, i was pissed for having the throttle and don't have the petal assist for months. But actually the throlled didn't bothered me so much. I pedaled only when i started my bike and then kept going with the throttle.

Excellent video! You're actually showing the display so I can read it while you're talking.👀🙂

Great video. Thx

Sweet instructional video

@PedalWithPower

2 жыл бұрын

Thanks Brother!

Great video thanks you

Thank you!

thank you very well done

@PedalWithPower

2 жыл бұрын

No problem, thanks for watching!

Thanks for the video. It’s very helpful, as I just received my XP 2.0. I really like it, but one thing that is a bit disappointing is that when using pedal assist 1 I don’t seem to be able to ride less than 7 mph. It would be nice if I could just tool around a bit slower while using pedal assist. It seems like in order to go slower I have to just pedal it like a normal bike.

Thank you for the video, XPeak has the same controller and it comes without manual. That's really dumb and you video is a lifesaver. Especially P10, 11 and 12 I had no idea what to do with those so thank you very much. Also the cruise control? I had no idea it existed. Gotta try it tomorrow. The only explanation I missed was P22 (Power Profile Setting, but I don't have a clue what it does and how to tweak it), but it is possible your XP doesn't have it. Will keep googling.

hey thank you much, enjoy your vids. Question. How do you activate front headlight & rear brake light ?

Its a great tutorial, I wish the camera stayed on the screen more, but the explanations are well done.

@PedalWithPower

2 жыл бұрын

I'm still working on how to film these. I will do another video that does a much better job. I noticed the camera sometimes is not where I wanted it to be. You should have seen me trying to wave it up higher with my hands while I was editing it. It was funny. Stay tuned for a better video. I'm still figuring things out :)

Just the video I was trying to find! Thank you. Anyone know how to stop the brakes from squealing!?

Great Video...thanks. Is there a way to set to odometer back to a number? I accidently reset mine and wish I could put the number back in.

You have a good memory for all those settings.

Cruise control on my DIY kit maintains speed by fluctuating power out as opposed to the XP 2.0 which maintains power output. Would have been cool if they made that an adjustable option too. I can see use cases for both

@PedalWithPower

2 жыл бұрын

I hear ya, the Lectric just sets the power and speed will fluctuate.

Love all the videos, very well explained. My question is why would the tire size not be set at 20" to match the actual tire size?

@PedalWithPower

2 жыл бұрын

Thanks! Tire sizes like 20" or 26" are based on having a 2" tire. With these tires being much wider, the accuracy for the computer is better when it's set a bit higher. It's not perfect, just a little more accurate

@fishkillafishkilla

2 жыл бұрын

Thanks for the insight.

The only one I was really wondering about # 5 u skipped over, I think it's the pedal assist sensitively, my pa seems to be lacking

Hi Chris new to your channel and Lectric great info. I am getting confused on changing you freewheeler on my XPremium. Should it be 11,28,32 or 34? I keep seeing different options. Thank you in advance for your help.

Great video buddy very helpful. Are you in Texas? That park looks familiar

@PedalWithPower

2 жыл бұрын

Thanks Ben! I'm in Oregon

Hi again Chris. Maybe there's another solution to this question but I wondered if there is a way to fine-tune the pedal assist speed? For example my daughter and I weigh completely different, so we both want to be in pedal assist 3 for various reasons but she tends to go faster and pedal assist 2, due to weighing half of my weight. In other words I tend to go about 11 mph comfortably in pedal assist to when she goes about 12 and a half mph. I was just wondering if there was a way to fine tune the pedal assist speed a little bit. Thanks again for your great videos!

Chris, thank you for your videos. Question: what is the mode 18 for? My xp shows 90 and my wife st shows 100

Now this is exactly how you make a proper tutorial. Extremely well explained.

@PedalWithPower

2 жыл бұрын

Thanks, much appreciated!

Chris. It’s ride yesterday just with throttle. Question what setting controls the strength of the throttle? I comes on really hard. Did I miss something in your video. Had it in pa 2 but couldn’t really pedal because I had the seat really low.

Thank you so much! This helped so much. I just got mine today. And I hear like a scratchy noise coming from my front tire. Any idea what it might be?

@PedalWithPower

2 жыл бұрын

Thank Gabriel and Congrats! Scratchy noise could be the front fender rubbing on the tire or more likely the brakes need to be adjusted. If it's the fender, just bend it out of the way. If it's the brakes, then here is my video on adjusting the brakes - kzread.info/dash/bejne/hoN_zquIgtLKibA.html - hope it helps

@gabrielresendiz2096

2 жыл бұрын

@@PedalWithPower thank you so much my man! God bless and thank you

Do you have a video on cleaning the bike?

Very nice park! Where is that?

Chris, I’m giving up my Lectric 2.0 in Milwaukee because it’s just too much for me. It’s heavy, it has hand brakes and gears (I grew up in New Orleans with a 24 inch coaster bike) and I just cannot jump off to catch my balance if i do become unsteady. I’ve ordered the new Lite model and was wondering if you have any tips and tricks for that model or do some of the tips and tricks for the XP 2.0 also apply to the Lite? Can the handle bar be turned around if needed? Does the display have all the same settings? I love your videos. Please keep them up.

@PedalWithPower

2 жыл бұрын

Thanks for the kind words! I don't have a Lite yet, but if I can get one, I will be sure to add it to the channel and post many videos covering it. My goal is to only show tips & tricks that I can prove in real life. I plan to eventually get the Lectric Lite and test it out, stay tuned...

Hi, 28 mph can be achieved by changing the freewheel to 11-28T . Makes a huge difference 😁

@PedalWithPower

2 жыл бұрын

You still need to change the 08p setting to 100 if you want the motor to assist past 20mph. A new freewheel helps a ton. Check out my newest video, I installed an 11-32 freewheel. Better top speed and climbing!

@eyeslow407

2 жыл бұрын

Can this be done with the Lite xp? I just bought one and 20 is fine in all reality, but would like to kick it up a knotch

@PedalWithPower

2 жыл бұрын

@@eyeslow407 From what I've heard, the Lite is 20 only

@eyeslow407

2 жыл бұрын

@@PedalWithPower thanks for the reply. Subbed

@Juice421fs

Жыл бұрын

Have a 3.0 with 11 28 and can't reach 28. Ghost pedaling at 26

If you agitate the pedals when you’re wide-open throttle the bike will go much faster than the throttle alone. No peddling throttle alone.

I have the Xpremium. PAS 2 is a bit too low of assistance PAS 3 is perfect. If I want a little more exercise I change it to PAS 2 but I can’t stay in that mode for long. Do you know if there’s a way to adjust the PAS output?

I know you said you don’t recommend resetting the odometer but what if you want to track your miles each ride. Would that be situation to reset the odometer?

It’s crazy how much faster 28mph feels than 20mph on the bike.

Thank you for your informative tutorial! I just received my XP 2.0 ST. What would happen if you accidentally pressed an incorrect value in a program setting that is not suppose to be messed with? Let's say you accidentally touched the + or - key and changed the value out of stupidity in one of those off limits settings. Is there a way to regain Lectric's own factory settings? And how would one know what the correct setting would be for a programable setting that you were not supposed to mess with? Just in case it happens! Thanks again.

@PedalWithPower

Жыл бұрын

I haven't tried. Just be mindful when adjusting your settings

@lawrencepardy2884

Жыл бұрын

I contacted customer service and as long as you can give them your serial number, they can provide the correct settings for your model in case they get messed up.

What's the benefits of changing the tire size?

Great review. I'm 6'4 ...what number height are your handle bars set?

@PedalWithPower

2 жыл бұрын

Thanks for watching. I have mine both at 2. Works pretty good for me 👍

Can you show us how to properly adjust the back breaks, my bike is new and I'm getting a horrible scrapping noise

@PedalWithPower

2 жыл бұрын

Just did a video on that - kzread.info/dash/bejne/hoN_zquIgtLKibA.html. Hope it helps

Chris, what freewheel do you have?

Wow! I didn't know that my bike had all of those different settings. How do you remember what number is for what setting?

@PedalWithPower

2 жыл бұрын

You can do a lot with this bike! I remember the settings because I wrote them down. :) Here is an article I wrote covering all the settings -- pedalwithpower.com/lectric-xp-settings-explained/

Gloves! Where did you get those gloves? I need a pair like that because my hands are always cold

@PedalWithPower

2 жыл бұрын

Hi Sagi, here is my video showing all about these gloves -- kzread.info/dash/bejne/dGlmsLyRobSZhKw.html

Is the throttle on/off or variable speed ?

Do you know if there is a setting for throttle my bike lags when giving throttle or revs up a bit before kicking in?

Is there any way to increase the throttle sensitive. It feel like the trottle is kickin litttle slow. If i replace with another custom throttle is it possible to make it little quicker?

my speedometer only works when i'm pedaling is there any way to make it work all the time even when i'm not pedaling

I have the XP 2.0 just got it from my wife. I have the G-Force bike for me seems a little bit bigger and more rugged. Hydraulic brakes, Little bit more powerful. 4-in wide tires. I'm a big guy. ALSO HAS A COOL HORN THAT'S BUILT IN TO THE LIGHT. WHERE'S THE HORN ON THE XP 2.0 I CAN'T FIND IT?

Great video! Thanks. But I want to know what those settings that are not in the manual do. I hack everything I own... I'm not gonna stop at an ebike. >:D

Would changing tire size on display to a larger size, lets say 26, would that trick bike into gaining a little speed? Of course the speed shown on display would be wrong but i have a need for speed!

@PedalWithPower

2 жыл бұрын

Shhh. Yes👍 BUT, it will throw off your mileage, odometer and trip meters. So you can do this, but I like having accurate readings. I have a video on how you can improve your top speed without tricking your bike - kzread.info/dash/bejne/i4GX2dCcfarKj9o.html

Great video! If there's any differences between the 2.0 and the Lite's available settings, would you mind making a video about or pin a comment about it? Thanks!

@PedalWithPower

2 жыл бұрын

Good question, I don't have a Lectric Lite. I can't afford one right now. If I do eventually get one, I will definitely make that video and more 👍

How can you turn on and turn off the lights of the bike? Thanks

How do you turn on the light that is on the front?

Thanks but what about p setting 22?

My husband and I just received our Lectric XP 2.0 ebikes. The white version for me and the black version for him. There is one setting that I would like to change, it is the 08P. We are only able to select a maximum speed of 20 mph or 28 mph. I would like to set my maximum speed to 15 mph. We are unable to do so. It appears that it is only set to toggle between 20 and 28 mph. Possibly done by the manufacture of the controller per Lectric ebike's technical team's advice. Possibly someone knows of a possible work-a-round. Other than this issue we are really enjoying our new XP 2.0's.

👍👍

@PedalWithPower

2 жыл бұрын

👍

Do all of these settings apply to the XP 3.0?

Will cruise control have any affect on battery? Positive or negative?

@PedalWithPower

2 жыл бұрын

Yes it can, if you keep your cruise control set at a lower speed, it can be very helpful.

Do u have 2 be on a Certain gear or ?

What's your setting for 11&12?

If you want to know. I found out the battery is not giving enough power! That is why top speed is 25 mph. 10.5 amps does not give enough discharge power to the motor. If the controller is 25 amps with a 750 watts motor. You will need a 48 volt 30 amp discharge rate witch means you need to get a 14 AH battery to reach 30 mph on your bike.

@PedalWithPower

2 жыл бұрын

Thanks Carlos! Makes sense. I always appreciate the info

Love your content but just a little suggestion when you're pressing the adjustments your camera is not even on the control panel. We can't even see the numbers yourare pressing.

I have got mine to 28mph 👍🏼

@PedalWithPower

2 жыл бұрын

It's a pretty fast bike! You've tasted the heat 🔥

I seen some ware thay say wight don't matter how it performs just the battery life if you got lot of weight

@PedalWithPower

2 жыл бұрын

Rider weight plays a very big factor in how far you will be able to go. The more weight that motor has to propel, the harder it has to work and the quicker the battery will drain. Lighter riders will get better range than heavier ones.

Thanks for his. I have these in manual however you better explain it. Also, I have burned through two controllers and I am 185 pounds but my tires set for 20 inch so after seeing this i switched to 22. That probably only refers to speed calculation but I'm desperate to figure out wha'ts going on.

@PedalWithPower

2 жыл бұрын

Bo problem Kevin. I looked through the manual when I first got the bike, I thought it would be useful to show what each setting does. Like a video manual 👍

Timestamps wouldve helped alot, but thank goodness for 2x speed

So I did tbis and now my PAS 1 doesn’t work and my PAS 2 lightly works…no assist . 3 4 5 working fine. I had to have messed with a setting

The cruise setting doesnt work with mine, what do i do?

Is this the same for the 1.0 model

@PedalWithPower

2 жыл бұрын

Sorry, but I'm not sure. I never owned the 1.0.

How do I set it up to show how many volts are left in the battery charge?

@PedalWithPower

Жыл бұрын

just press the menu button when riding

@tomhunter8090

Жыл бұрын

@@PedalWithPower Thanks

my dear. Bonjournice to mee tyou.well !

@PedalWithPower

2 жыл бұрын

Thanks 🙏

I was able to change the tire size to 24 on my wife’s step through, but not on my XP 2.0. It’s stuck on 22. Any suggestions?

@PedalWithPower

2 жыл бұрын

Unfortunately, I have heard of some displays being locked out from Lectric. You may need to contact Lectric to get an unlocked display. I don't work for Lectric, so I'm not sure why some displays can be changed and some can not. Can you change any of the other settings?

@markwagner6353

2 жыл бұрын

@@PedalWithPower Yes, I can change other settings, but on p6 I just get a flashing 22. The up and down arrow buttons don’t change the number from 22. BTW you’re videos are great.

@PedalWithPower

2 жыл бұрын

Thank you very much. I'm not sure why that one won't change if the others will. You may just want to keep your bike and your wife's at the same setting setting, so at least the 2 bikes will read the same mileage.

I have a 2.0 and I only have 32 but I don’t have 45 or 100 so I can’t go 28mph I only go 20 pls help

Just got my XP LITE , Having trouble unlocking , P 08 won’t change from 32 . It simply blinks. HELP! I am trying to get rid of the speed lock!

@PedalWithPower

2 жыл бұрын

Hi Jenny, sorry to hear that. I don't have the XP LITE, but from what I've heard, I don't think you can change that setting on the Lite.

@jennyboy5226

2 жыл бұрын

@@PedalWithPower mannnnnn that sucks! Thank you

@bruceh3786

2 жыл бұрын

I suspect the option was left off because the Lite is a single speed bike. The original XP with multiple gears requires pedal assist in high grear to reach 28 mph. The single speed grearing may be to low on the Lite to reach much over 20 mph.

I got new everything on my 2.0 but it just doesn’t work. New motor, new controller, new cables, new display. Changed the settings to PAS and throttle. It still doesn’t work. This makes no sense why nothing will get this thing to engage in any sort of way. Something has to work but nothing will.

I'd really like mine to go to 40 please.

@PedalWithPower

2 жыл бұрын

Why stop at 40, check this out -- pedalwithpower.com/how-fast-is-an-electric-bike/