Would you all be interested in a deeper dive look into the settings I use with the video assist? LIKE THIS COMMENT if you’re interested

@joenicklo

Жыл бұрын

Sure why not

@Ansonandco

Жыл бұрын

@@joenicklo 😂😂😂

Anson, this timecode switch was a life saver bro, going crazy not knowing how to get record trigger working! Keep doing the good mahi.

I'm so thankful trigger record was in here for the S5IIX. Thanks!

@Ansonandco

11 ай бұрын

You’re welcome for that my dude

very informative and straight to the point

@Ansonandco

Жыл бұрын

Thanks dude!

thank you bro!

@Ansonandco

Ай бұрын

Of course!

Fxxk yes! Timecode through HDMI is the most part we want. Pickup the last piece of part S5iix missed

a very very valuable video Anson, the BRAW option I feel its like cheating 😂 but amazing to have, great video brother !

@Ansonandco

Жыл бұрын

thanks dude! yeah I see more of a reaction to all the questions i've gotten over the years about BRAW set up hahaha so hopefully it's helpful!

If you are using the Lumix S5iiX with the Video Assist 12G, remember you also need the Blackmagic Video Assist 3.10 Update or later, otherwise you'll get "Codec Not Supported"

@wildsfilms

8 ай бұрын

you just saved me a headache

can you please do an in-depth Braw dynamic range comparison? and highlight recovery

@Ansonandco

2 ай бұрын

I am definitely up for helping, this is something I typically don't get super technical on, but there are definitely videos out there for DR. which camera are you inquiring about?

@deeshith1

2 ай бұрын

@@Ansonandco Braw of S5IIX and cinema DNG of sigma FP at 4K... Both formats supports highlight recovery rt

Are there any ISO or IBIS restrictions when shooting Braw on the S5iiX?

Can you be recording CDNG on external ssd and simultaneously only MONITOR it via VIDEO assist? 10x beforehand

Hi Anson! Great video, I believe it is the same setup for an S5II with RAW unlocked? Also, is it possible to record open gate 6K on the video assist?

@JurassicTrance

3 ай бұрын

Did you ever find out if opengate is possible

@findingefilm

3 ай бұрын

@@JurassicTrance it is not. Blackmagic wants to keep BRAW open gate to their own camera, it would seem

Very helpful video Anson. I have a couple of questions regarding this set up. Regarding viewing on the fp's output, when you set raw recording on the fp, does it use the color off profile or something else? Can you change color profile on the fp when out put to raw? On the video assist, when taking the raw signal from fp, which built in LUT do you recommend to make it better for viewing since the fp does not have a Log profile or its own lut, is the BM film ok?

@Ansonandco

Жыл бұрын

Good questions! 1. It does put the FP into the color off profile, and you cannot change it. 2. As far as a LUT, I use my own custom LUT that helps me see an end product. It’s been forever since I made it, but I’m pretty sure I made it as a Rec 709 conversion LUT with footage straight out of camera, and put a grade on top of it. It’s gets me 95% there most of the time.

@RamasolaProductions

Жыл бұрын

@@Ansonandco thank you. I'm about to pull the trigger on a video assist as I have 2 pockets and need the BRAW for the fp to make them all similar as far as post workflow and archiving easier. Your videos and your posts at the fp forums have been very helpful.

@Ansonandco

Жыл бұрын

@@RamasolaProductions that’s awesome, I’m glad I could help. I will say there may be a learning curve if you’re matching the fp with an actual BMD pocket camera, but you can definitely make it work

@RamasolaProductions

Жыл бұрын

@@Ansonandco I had no problems matching them in my work using the CDNGs with the Pocket's BRAW, it will be the BRAW file from the fp that I might need to have to make a workflow. I might need your help with that. :)

Very cool thanks 🙏 Now the real question is would shoot braw over CDNG ? Do you have the same flexibility for color grading , hightlight recovery …. I know it’s maybe a lot to ask but a comparison between BRAW , pro redraw and CDNG would be such a very helpful video I’m struggling between a lumix S5II or a ZCAM that can shoot ZRAW then converted to CDNG What do you think 🤔 ❤

@Ansonandco

Жыл бұрын

If you hang out for the end of the video, I actually put together a video last year talking about why I prefer BRAW over CDNG, but I don’t think I included direct comparison footage. Yea CDNG is a digital negative and is actually RAW versus BRAW which some argue is not true RAW, but I do appreciate the look of BRAW and often prefer it. I have not messed around with R3DRAW, so I would not be a good authority on that comparison 😉 As far as helping with your decision, what are you filming?

@Outlabyrinth

Жыл бұрын

Thanks 🙏 for your very fast response !!!! I have watch the video until the end ?? maybe because I’m French the hangouts , I don’t understand , i ve just watch your last year vidéo between CDNG and braw 😊 Very clear about size files , workflow in General is better braw I just don’t get how much flexibility for recovery there is between those two I ll check other channel I will find a video comparison:) So far I’m filming nothing 😂 yet I Will start filming for music video and maybe start weddings for incomes 🎉 But the goal is music video content

@Ansonandco

Жыл бұрын

@@Outlabyrinth I only say stay til the end cause that video is on my end screen suggestions. As far as what I would choose for that shooting scenario. I personally would choose the lumix. Weddings and autofocus are very good and the IBIS will be helpful

Great job, son-I love you, mom

@Ansonandco

Жыл бұрын

thanks mom! love you too

@mnkwazi

Жыл бұрын

@@Ansonandco Ahhh so sweet

Please, does Sigma FP may record SIMULTANEOUSLY Braw to card in Blackmagic video assist AND cdng to external disk via USB? (Of course, question is about safety of dual recording possibility.) Thanks in advance for answer, I didn't find it nowhere, just Simga SEO mentioned it is possible during interview for NFilmSchool...

@Ansonandco

4 ай бұрын

Hi, it is not possible. The FP does no dual recording of any kind.

can you do a comparison video between FP and S5iix

@Ansonandco

11 ай бұрын

🤔

Thanks Anson. Is 4k the max you get on the video assist or is it possible to get open gate?

@deeshith1

2 ай бұрын

It's not available on FP yet

Can you shoot opengate BRAW?

@Ansonandco

3 ай бұрын

Unfortunately no

Does the FP or FPl support trigger recording, or must one use the video assist?

@Ansonandco

4 ай бұрын

Trigger recording to the video assist is supported

Is it ok to plug the BMVA and sigma fp to the same V mount battery?

@Ansonandco

2 ай бұрын

I would advise to use a v mount adapter to regulate the power of both, but other than that it should be

Whats the difference between the 5" and 7" video assist, aside from the larger screen?

@Ansonandco

10 ай бұрын

Two mini XLR ports, a lan C port, dual sd card slots. I believe that is it

anson,which one will you advice me between panasonic s5mkiix or sigma fp l for video

@Ansonandco

Жыл бұрын

What are you filming?

@AdekunleJohnsonEseyin

Жыл бұрын

For church programs,

@Ansonandco

Жыл бұрын

@@AdekunleJohnsonEseyin probably lumix s5iix

@AdekunleJohnsonEseyin

Жыл бұрын

Thank you very much sir. Shout out from Nigeria

I'm a noob. But I'd like to know does the Black magic RAW footage with the lumix would be the same quality just like the Black majic RAW while using BlackMagic camera? Thanks

@Ansonandco

9 ай бұрын

Good question. It will not be. The sensor is Calibrated differently. And it technically is shooting in v log, not blackmagic film log

Hi Anson. Not sure how to formulate this, but does the fp-L have less artifacting when shooting 1080p, if you crop into the sensor and get 1 to 1 pixel? Essentially using. it as a s16 camera? When shooting slow motion 1080 on the fp, I do sometimes get line-skipping artifacts in straight lines. Kind regards -Ola

@Ansonandco

Жыл бұрын

I shot a ton of 1080 footage in my trip to Croatia, I didn’t notice a ton and I even shot full frame for a lot of it. The fp L does have a OLPF filter and so it’s reducing artifacts a little. BUT if you do want a 1:1 readout it will need to be close to a s16 crop yes. If you want to check out test footage, look at my fp L in 2023 video I did a couple months ago, it has 1080 footage in there if there is any slow motion, obviously that is 1080

@film20plus

Жыл бұрын

@@Ansonandco Thanks :) I will have to see it again. I love "kings landing" :) have been there aswell, with the og bmpcc :) Have you tried using s16 glass on the fp-l ever ?

@Ansonandco

Жыл бұрын

@@film20plus it’s such a beautiful location. It was hard for me to go out and shoot in my hometown after that lol I have not tried s16 glass on the L….🤔 may have to try it out!

Which combination do you prefer: s5iix + braw or sigma fp + braw?

@Ansonandco

Ай бұрын

Sigma fp and BRAW. The s5iix gets really grainy and you lose open gate

The result is similar of filming with the bmpcc? The result color is Gen5?

@Ansonandco

Жыл бұрын

It is!

@aviramestudi

Жыл бұрын

@@Ansonandco Gen 5 color??

@Ansonandco

Жыл бұрын

@@aviramestudi sorry that was my initial response was for gen 5. As far as the BMPCC… are we talking about the OG?

@aviramestudi

Жыл бұрын

@@Ansonandco the 4k

I’m getting “codec not supported” on my black magic assist, even after following your instructions. My lumix s5 iix is set for manual video.

@Ansonandco

Жыл бұрын

Did you turn on raw recording on the record tab of the s5iix? And on the record tab of the video assist change it to blackmagic raw? If you want to send me a pic of your settings on IG, send a DM to @ansonandco

@hartzogLovesScience

Жыл бұрын

Thank you for assisting me to link my LUMIX S5 iix to my BM video assist.

Nice nice...but we still don't which BRAW you like more FP or S5iiX...for myself having BRAW and prores I found a converted prores raw HQ footage from S5 to CDNG the best ever image quality coming from an S5org...much better vs BRAW but huge amount of data...for my self I decided to invest in lights and wait for now to get a new camera...I try to get away from GAS and improve quality of footage and skills

@Ansonandco

Жыл бұрын

If I had to pick, I think I still prefer the image of the fp but the iix is close

@film20plus

Жыл бұрын

@@Ansonandco any differense between the og fp and the fp-l, now that you have used both for a while?

@Ansonandco

Жыл бұрын

@@film20plus OG is a little better in low light, due to less pixels. And rolling shutter is slightly worse on the L, but that is again due to more pixels. But I’ll be honest I don’t notice the rolling shutter a ton… so that one is a wash for me. Otherwise they are mostly the same

@film20plus

Жыл бұрын

@@Ansonandco Thanks!

@Ansonandco

Жыл бұрын

@@film20plus of course!

Can I record in braw at 4:4:4 since the camera only outputs 422?

@Ansonandco

19 сағат бұрын

You should be able to record all codecs of BRAW

what media is required to shoot in BRAW?

@Ansonandco

Ай бұрын

Either SSD or sd cards

Is the blackmagic raw with the s5 12 bit?

@Ansonandco

3 ай бұрын

Yes it is

I’m having a problem connecting it, my HDMI Raw Data Output won’t turn on it keeps saying “ This item cannot be set in the current mode System Frequency 24.00Hz CINEMA)”

@Ansonandco

13 күн бұрын

You may need to change you frequency on your camera. If you see my recent gh7 settings video, I show you where this setting is, you’ll need to switch it back to the non cinema frequency most likely

@sanasoureshjani6715

10 күн бұрын

@@Ansonandco which frequency do you use?

What image do you prefer of the 2 cameras when shooting in RAW?

@Ansonandco

Жыл бұрын

I think I still prefer the fp, there is something special about the image that it just seems more filmic, but if I need AF the IIX is very close enough that I’m not sad about it. The one thing that drives me nuts about BRAW on the IIX is that 4k is cropped, no matter the frame rate. And there is no 6k open gate, so for my projects where I use the IIX I’d rather just use pro res or all-I

@dimitris.tsakalas

Жыл бұрын

@@Ansonandco I see. So you are using 4K BRAW on the lumix s5 iix?

@Ansonandco

Жыл бұрын

@@dimitris.tsakalas no I am primarily using 5.9k on the IIX

@Ansonandco

Жыл бұрын

@@dimitris.tsakalas … just for the full frame support

@dimitris.tsakalas

Жыл бұрын

@@Ansonandco Very Interesting. I was thinking that maybe the s5 would have a "better" image due to the 6K sensor but I am thinking of buying an fp because it fits my needs slightly better

newbie here. I don't understand, why can't you shoot in raw in the camera you really need a external monitor just to do it? I just want to get the best possible video quality that gets me the most to work with in my editing software. I work with the gh6 and S5 mark ii primarily.

@Ansonandco

6 ай бұрын

The FP can do uncompressed raw in camera. The lumix cameras cannot. Compressed raw can only be recorded externally due to patents by RED. So it’s just a limitation of the hardware but also a legal restriction

Hows the latency with the video assist?

@Ansonandco

Жыл бұрын

Not super noticeable, I’ve not run official tests on it, but it’s never stuck out as especially bad at all

@novaflowproductions

Жыл бұрын

@Ansonandco I've heard about noticeable latency on the ninja but if you don't see a major lag then I'm definitely going with the video assist. I would love to see a video in latency if you do one 🙌🏾

@Ansonandco

Жыл бұрын

@@novaflowproductions hit me up on IG if you have one and I’ll send you a test

@novaflowproductions

Жыл бұрын

@@Ansonandco sounds like a plan I'll do that now

Will the fp still use all of its hdr even when your shooting 12 bit 4k at 23.98?

@Ansonandco

Жыл бұрын

I’ve found the shadows are a little harder to recover in BRAW than CDNG, but it’s still pretty decent

Will I still be recording in 4kdci if I dont have a monitor connected? I just have an ssd connected via usb C?

@Ansonandco

Жыл бұрын

If you are referring to the SIGMA, no you will not be. It only records UHD and not DCI. The s5iix does record DCI, but the fp/fp L do not

@nicoharken6704

Жыл бұрын

@@Ansonandco Would it record Dci if you were recording to the atomos ninja v?

@Ansonandco

Жыл бұрын

@@nicoharken6704 I just tested the ATOMOS NINJA V and if I remember it also supports 4k DCI. Basically the FP only does 4k DCI over HDMI at this time