How To Set Up a Total Station. Leica TS16 Guide for Site Engineers
Robotic Total Station tutorial. How to Set Up Total Station? Step by step guide on using Leica TS16 Total Station / EDM. Leica Captivate software.
⬇️⬇️👷♀️👷♂️Today👷♀️👷♂️⬇️⬇️
👉 Orientating with backsight
👉 Transfer Height
👉 Resection
👉 Orientating to line
Interested in learning about setting out and surveying in construction?
Want to know how good civil site engineers work?
Looking for a career in construction?
JOIN the best engineering community 👍👍👍 SUBSCRIBE NOW!!! 👍👍👍
leave the THUMBS UP!!! Follow the LinkedIn page 😁
LinkedIn: / siteng
/ greg-stepien-7346ab183
Subscribe: kzread.info?sub_...
👷♀️👷♂️ EVERY GOOD CIVIL SITE ENGINEER MUST HAVE - watch the VID
👉 • 10 MUST haves for CIVI... - items I use and recommend 😁
SAFETY BOOTS-choose your size ⬇️⬇️
👉 amzn.to/3NfjUCJ
👉 www.screwfix.com/p/dewalt-pho...
TAPE MEASURE ⬇️⬇️
👉 amzn.to/3xQ3cEf
👉 amzn.to/3xZ9ykM
TAPE HOLDER ⬇️⬇️
👉 amzn.to/3NzLDOV
👉 ffx.co.uk/product/Get/Makita-...
CALCULATOR - sometimes you can find them half price in Supermarkets 😁⬇️⬇️
👉 amzn.to/3u2hHE6
DRAWING FOLDER ⬇️⬇️
👉 amzn.to/3NqYoeA
👉 amzn.to/39OUNZP
NOTEBOOK - get whatever really to take some notes 😁⬇️⬇️
👉 amzn.to/3HQkbLx
PENCIL - 0.7mm - good price, but for this colour 😁⬇️⬇️
👉 amzn.to/3OlvwW3
PENCIL - 2mm ⬇️⬇️
👉 amzn.to/3QHVIff
JOINER'S PENCIL ⬇️⬇️
👉 amzn.to/3xRIaFl
TIPP-EX - these are the best I used ⬇️⬇️
👉 amzn.to/3QNrKGH
PERMANENT MARKERS ⬇️⬇️
👉 amzn.to/3ykpcZv
CHALK LINE ⬇️⬇️
👉 amzn.to/3A0aUOY
👷♀️👷♂️FEW EXTRAS I USE TOO 👇
SMALL SPIRIT LEVEL - you can always borrow from a Chippie if needed 😁 ⬇️⬇️
👉 amzn.to/3OEXs79
KNIFE ⬇️⬇️
👉 amzn.to/3HQKUrl
GLASSES - Despite you will get safety glasses, on some sites they’re really low quality and I don’t want to get my sight worse using them. Fortunately it’s a rare situation :)
👉 amzn.to/3nawPeN
👉 amzn.to/3yhMMWM
GLOVES - I got them first on one of the jobs and I use only these from then 😁⬇️⬇️
👉 amzn.to/3bvldjC
-IMPORTANT-
Some links in the description may contain one or more affiliate links for items mentioned in my videos - the items I personally use and recommend. You will support my channel if you use these links, as I will get a small commission of the sale. The price is exactly the same without the link, but this way you will help the continuous growth of the channel. Affiliate links are primarily Amazon.
#civilengineering #siteengineer #constructionuk
Пікірлер: 95
What a legen professional surveyor thank u sir for ur series lectures.
@SITENG
10 ай бұрын
Thank you for the comment 👍👍
Very informative. Thanks a lot😊
@SITENG
9 ай бұрын
Thanks! Happy to help :)
thanks for everything!
@SITENG
3 ай бұрын
Happy to help😁
very useful Thanks buddy!!
@SITENG
Жыл бұрын
Thank you for the comment 👍👍
Awesome video.... .. ♥️♥️♥️ 👍👍
@SITENG
Жыл бұрын
Thank you👍👍
Perfect thanks
@SITENG
Жыл бұрын
Happy you like it!!
I need more Tutorial for Leica TS16 total station sir, to familiarize about Leica TS16.
@SITENG
Ай бұрын
More coming soon, did you watch all?
Hi fantastic channel real appreciate the information you providing. When doing a resection using retro targets is it better do I select the option of measure any surface?
@SITENG
Жыл бұрын
It's not better, but you can use it. I always try to use a retro target mode as this actually makes sure you shoot the targets right (if something will be on the way a bit, or the angle is bad retro mode won't give you the reading), but of course I use 'any surface' mode often myself as the targets are far etc (any surface and retro tape is the same constant)
@Just_Do_It..
Жыл бұрын
Hello
Another fantastic and helpful video. Thank you! Where did you get this simulator from?
@SITENG
8 ай бұрын
Thanks! Simulator comes from SCCS website and I think you can get it again now. I downloaded it long time ago and then couldn't find it. This weekend I'll go through the net again and if found will add it to the description :)
Greg your speaking speed is a little bit higher... We are managing it but try to speak a little bit slower dude. Am enjoying it man ... 👍👍👍
@SITENG
Жыл бұрын
will do. 👍
great video Greg...what station u getting next then?
@SITENG
Жыл бұрын
Thanks Chris! Not sure yet :) I will maybe do some vids about statics etc and then will try to get some Topcon
Thank you for the valuable information , can you please advice us on the effect of the weather on the leica T16 Robatic station ?
@SITENG
Жыл бұрын
Hi Mo! I wouldn't be worried too much about the weather when setting out for jobs I am showing. Most important is to focus on all other things. Please remember that you can put the info about the weather when you set up your TS and it will compensate for the weather.
@mohammedabdo8222
Жыл бұрын
Thank you so much . i really appreciate the respond
@SITENG
Жыл бұрын
👍👍
👍
@SITENG
Жыл бұрын
👍👍👍
Been waiting 4 months for another video haha
@SITENG
Жыл бұрын
coming soon 😁😁
@engr810
Жыл бұрын
Same here
@MrLan3r
Жыл бұрын
@@SITENG how soon?
Hello Sir , What Lenses do you recommend to purchase for the Leica TS16 For Far Targets ? As I Have an Issue doing an As Built on Precast Elmids Due to Hight of imbeds , its difficult to get an accurate pebbles at the pole and get a good shot .. Recommendations Please
@SITENG
Жыл бұрын
Hi, I am afraid I can't help you with this much
Hi. Would you like to tell where from download the same total station program on pc like you showing on your video please.
@SITENG
2 ай бұрын
I found it on some old opical website I think, they are G2 survey now, bit you have to look online. I am working now on getting available on my page, but we’ll see 🤞
Hi Greg. What's the ideal laser plum intensity of a ts 16? Or you have no need to adjust it when you receive your EDM from the supplier? Thanks.
@SITENG
3 ай бұрын
Hi Jerome! Whatever you need really if you’re using it. It will be default set, yeah. Are you using it, or do you mean EDM laser?
@jerometab0709
3 ай бұрын
Okay Greg thanks. What I mean is the Laser Plum. Intensity shown on the screen when you bubble level the instrument.
Hi. I have a question. I am a engineer from British army with degree in survey engineering, know how to use kit and have done construction jobs in army for last 15 years. I am now a manager with project management qualification and also degree in construction. Would I find site engineering job OK. Also I want to live in Lithuania and only work in UK for one project a year like 4 or 5 months. Would it be likely I could work weekends as well while I am over
@SITENG
Жыл бұрын
It's possible, but you will have to contact agencies etc. I was thinking of doing the same TBH. Probably that would be a setting out engineer/site engineer roles but it's doable. Senior roles are for longer. Most of companies (frames) are busy in the season and they're often need extra engineers, but you would have to look for work yourself anyway. You can try JRL for start as I know many army people got a opportunity there - you don't have to tell them straightaway you look only for few months 😁
Hi Greg, is this possible for you to give link to download the simulator for TS16. Please if you can . Thanks
@SITENG
Жыл бұрын
Hi, unfortunately the page is not working anymore, I am lucky to have these from before. Tried also to copy this to my friend, but didn't work
Hello Greg. I'm currently a ground worker with some op tickets. Do you need any degree to become an Engineer or experience with CSCS card enough? Thanks!
@SITENG
10 ай бұрын
It's enough, there is always some struggle to find first engineering job, but once you start you'll be good!!
If u can please explain about DTM
@SITENG
Жыл бұрын
Can't promise any soon, sorry, but I will definitely
Pozdrawiam
@SITENG
Жыл бұрын
Pozdrawiam 😁👍👍
I have a opportunity to learn to be a engineer on site but I won’t be going to university or getting any qualifications, do you think this is a good idea? I would want to put myself through some form of education to get some qualifications out of it, have you got any courses that you would recommend? Thank you!
@SITENG
Жыл бұрын
If you have a chance to go working on site go for it!!! You can alway do your qualification later, no problem. I would definitely go this way!
@MrMRzJoe
Жыл бұрын
@@SITENG thanks for the advice! I’ve been working as a ground worker for a year and a half now so I have the experience on the ground I just need to apply that to the engineering side of it
@ibadc8851
Жыл бұрын
Defo go for it. You'll learn everything they teach you in uni on the job within a year
Hi, I am a looking to learn the total station so pls suggest which institution i should go for around Birmingham. I am a graduate from Wolverhampton University but i went to india after course and now i am back here so looking to learn total station which is like a prerequisites here for site engineer job. Pls help.
@SITENG
Жыл бұрын
not sure about Birmingham area, watch my YT vids. Look for some CITB courses so you can get a gold, or white CSCS card later
@engr810
Жыл бұрын
Where to learn full setting out process
@engr810
Жыл бұрын
Did u get job or were u able to get training ?
@19rastogi
Жыл бұрын
@@engr810 not able to manage both yet.
Hi I am from India Is uk good for civil engineering jobs? What are the job opportunitys
@SITENG
Жыл бұрын
Uk is definitely good and there is a need for engineers still, but guys don't think jobs are waiting for you here, you have to put effort to find a job still
Do you need a master's degree or is a bachelor's degree enough. Also what do working hours typically look like as a civil engineer?
@SITENG
Жыл бұрын
You don’t need, typically it’s 10h a day
@oldmanjenkins9230
Жыл бұрын
@@SITENG is that 5 days a week? And how many holidays do you normally get?
@SITENG
Жыл бұрын
Depends on the job, there is often Saturday till 1pm I work as self employed so don't have paid holidays, but it theory I can go whenever and for long I want to and in my case I like this freedom 😁
hi brother I am manikanta good with great content I am from India I want to learn to buy this TS 16 what is the price and is there any learning courses about Leica Total station and surveying universities
@SITENG
11 ай бұрын
Hi Manikanta! Thanks! There are some courses, but can't really recommend as I didn't do any of them :) There are unis as well offering surveying degrees, but unfortunately I don't really know too much about it. Wish you all the best and hope you'll find what you're looking for!
Sir your videos are informative and interesting. How can someone contact you?
@SITENG
11 ай бұрын
Thanks, LinkedIn 😁👍👍
Where we can get trening software?
@SITENG
6 ай бұрын
You have to look on line, I am trying to get these downloadable from my site, but might be few more weekes
Sir can I get site engineer job in uk
@SITENG
11 ай бұрын
I don't really know as I am not a recruiter
Hello! Do you need a volunteer on Saturdays ? I am available. 😊
@SITENG
Жыл бұрын
Hi! Unfortunately not at the minute, but stay in touch 👍👍
Hi Sir I have done Btech civil Engineering and working as a Civil engineer draughtsman from 2 years in india ,Can i apply for job in UK
@SITENG
10 ай бұрын
You can try, but possibly you would need to get sponsorship from the UK company
@GurpreetSingh-ii7if
10 ай бұрын
@@SITENG Thankyou sir, will try
@SITENG
10 ай бұрын
@@GurpreetSingh-ii7ifno problem, wish you all the best!
Where to buy a total station?
@SITENG
Жыл бұрын
Next month I will be selling mine TS15 😁 Can try sunbelt rentals or sccs
@thefancullinibrothers1983
Жыл бұрын
@@SITENG How much?
@SITENG
Жыл бұрын
@@thefancullinibrothers1983 Not sure yet, have to check the market, but it's good condition and I didn't use it much TBH :)
@engr810
Жыл бұрын
I want to get ready for site engineer job, but unable to find any detailed video, i now want to hire station can you offer some advice
Hello
@SITENG
Жыл бұрын
Hello 😁
Hi
@SITENG
Жыл бұрын
Hi!
TS16 I1 "R500" insturment have AutoHeight Feature: A new way to measure instrument height
@tsheringdorji2996
Жыл бұрын
i have trying mange time to get auto instrument height measurment but i didnt find so far?
@SITENG
Жыл бұрын
I normally set it myself using a known height 😁
I hold a master degree in construction management from Coventry University, what is my opportunity to hat a office job
@SITENG
Жыл бұрын
There are loads of office job, so not sure what do you mean by that. You have to look for assistant PM jobs maybe if you want to spend more time in the office.
@ghanimqasim
Жыл бұрын
@@SITENG Yeah I am looking for spending more Time in office or company main office than site. So what softwares should I know.?
@SITENG
Жыл бұрын
Depends what job you want to do really. If it's engineering, definitely AutoCAD, maybe Navisworks, A-site or 4 project etc and micrososft package always whatever you will be doing. If it's management you might need to know some soft to create and edit job programmes etc