Finally someone that gets to the point and clear walk thru. Can you do a video on setting up the dual boost valve in the software and controlling boost for a car that would be daily driven. No one has made a video on KZread like this all that I see is for launching at a track

Straight forward, Thanks a lot for a person who becomes handicapped when I look at wires I understood this perfectly. Thank you!

Your videos have helped me out a ton. Thank You!

@busa4mee

4 жыл бұрын

No problem, I'll keep them coming!

Super easy great vid!

Great video I'm getting down to doing the little things helps out TY

Thanks, I'm going to try it out.

Thanks for making this video. I'm going to watch your flex fuel videos next. I hope that the GM sensor can flow enough fuel to keep up with my fuel pump

Great video thanks alot

Thanks for the vid

Gave you a sub you're the kind of guy I like to be around. I've got a 62 Willys Jeep SBC350 4 Speed Muncie, but all my other vehicles are LS swapped.

@busa4mee

Жыл бұрын

Well thanks!

Lets hear the jeep on 2 step! Thanks for the vid.

@busa4mee

4 жыл бұрын

kzread.info/dash/bejne/pWWMk819o5faYJc.html

@busa4mee

4 жыл бұрын

kzread.info/dash/bejne/mpt_rsaIorzIeps.html

Cool thanks

jeep is sick, i have a tj with twins out the hood on 42s im lil scared to 2 step the ol girl as ive shot parts of my head gasket out the side before

I put Terminator X on my YJ. I’m going to try this out and send you a video. Thank you!

@busa4mee

4 жыл бұрын

Awesome!

@billybadass411thefirst9

4 жыл бұрын

Team Hammeronit! No turbo on mine though. So not quite as cool. Keep up the good work!

@busa4mee

4 жыл бұрын

@@billybadass411thefirst9 well what the heck! Lol, thanks brother!

Thanks for the video I want to know how to connect the pc to holley ECU and synchronize the tune and also how to program input and outputs

@busa4mee

4 жыл бұрын

You bet!

Thanks for the vid. Would of been nice to see u actually use the 2step

@busa4mee

3 жыл бұрын

There are other videos on this channel of it working!

Hello is that a 12-volt trigger wire or ground that you ran from the number 2 input?

So If I set it up for ground and put it on my break pedal Everytime I hit my break it'll activate. That cool but do i still a switch or if not and I'm at the track clearing 6200 rpm and I hit my break it won't try to hit 2500 will it 😅

I tried to use it in #2 inputs but it wouldn't show up in Pin Map. Put it in #3 and it showed up

Probably a dumb question but 12v keyed to the button then the button to the #2 input right? If I kept it as a 12v input

@busa4mee

4 жыл бұрын

You got it!

How about enabling rev limiter #1 under the spark table in the holley software? Is that not necessary anymore?

@arnsbarn_autos

3 жыл бұрын

Yeah if you want to pull timing to build boost I’d think you have to use that too just enable it and drag it in next to it

On that red white input it say it’s ground on the manual is there a Settings you change on it for 12 volts power switch

@busa4mee

4 жыл бұрын

All the wires on the input harness can be used for 12v, ground, 5v, or frequency. These settings are changed in the software.

perfect. cant wait to do ricer things

@busa4mee

3 жыл бұрын

Wummmmm pop pop POP

I dont currently have a computer to do what you did, can i use 2 step if i skip that step??

@busa4mee

3 жыл бұрын

You'll have to set it up with the software unfortunately

My input #2 has 12volts

So you don't need to go out and buy the $300 msd 2 step box ?

@busa4mee

Жыл бұрын

Definitely not

Rambling is killing me lol😅

Didn't work for me. Not sure why.

@busa4mee

4 жыл бұрын

Check your solenoid for engagement

Shifter under the dash??? Wtf

@busa4mee

3 жыл бұрын

Just temporary! Although it's still like that today 😂