This is a perfect video about setting rivets (at least for me). I've watched other videos but had trouble understanding them. Yours is so clear that I could follow it even if I was falling asleep. Thanks Matt.

@leatherpunk

5 жыл бұрын

Glad you find it useful, Mike, thanks for watching!

I've ordered buckling wrist bands off of you and it's been 5 years and they are still going strong! Your products are top notch and just simply awesome! Be ordering more in the future.

@leatherpunk

4 жыл бұрын

Thank you so much for sharing that, glad they're holding up! I love hearing from old customers, stay in touch!

Thanks for making such an easy to follow & concise video about setting rivets.

Thanks, Matt, today I had to replace a belt buckle, I had an assortment of rivets and your video explained the way to go. Top video matey.

I've been searching for a video like this for over an hour. Thank you so much for uploading such helpful content!

Great tip to grind down the edges of the domed tool. I’ve experienced the problem of a ring indent in the leather around the rivet. That’s a great solution. Thanks!

@leatherpunk

4 жыл бұрын

Thanks, glad it helped!

WOW, am I lucky to have stumbled across your video. A rivet broke on my knife holster so I went out and bought a regular Arrow RH200 pop rivet gun for metal working. If I had used that to install a rivet it would have looked awful and had a big ugly dome on one side. I guess now I've got to do some Internet searching for LEATHER riveting tools and rivets and do the job properly according to your video. Thank goodness you posted this video.

@leatherpunk

7 жыл бұрын

Thanks, glad you found it useful!

@wserafin11

6 жыл бұрын

Nice work Matt! Thanks!

@leatherpunk

6 жыл бұрын

You bet!

Thankyou so much. I'm fixing a leather purse strap and I need rivets for the project. This was very helpful. 👍

Simple and easy to follow, and clear video. Good tip about the concave tools.

@leatherpunk

4 жыл бұрын

My pleasure!

Great, clear tutorial! Thanks!

Thanks for this video. My leather utility belt had a rivet snap off. Cheap belt. But I wanted to fix it if I could to hold me off from buying another. Glad this is a simple fix.

That is the most god damned adorable lil anvil I've ever seen.

@leatherpunk

5 жыл бұрын

Thanks! Yep, it does the job!

@2degucitas

5 жыл бұрын

I saw it and said "awwwwww!"

@shawbros

5 жыл бұрын

I bought a couple of anvils even a bit smaller than the one in this video, on clearance at Harbor Freight a few years ago. Not sure of their usefulness though, at that size. They may have been intended for small hobby work, or maybe just a novelty item?

@raechelyndawn2580

4 жыл бұрын

shawbros I got mine at hf too and I use it all the time especially in jewelry making. 💙

@marcyjanitz6768

4 жыл бұрын

Lol

I have not been able to find the exact size rivet setter for the size of my rivets. Purchasing the standard size and filing them down is a very clever idea. I will try to accurately measure the heads of all my rivets and the file the wide setter down to size. Excellent idea! Thank you.

@leatherpunk

4 жыл бұрын

Thanks!

Thanks for that informative tutorial! 😊🌸

This has helped clear up some questions I had, I'm making a replica of the Sutton Hoo belt

I've been looking how to do this and as first I didn't even know what to search for ! So thanks.

Very helpful video. Thanks!!!

Clear concise thanks!

Thank you so much!! Filing was capital clue.

Great tip on rounding the concave setter to avoid marking the surrounding leather. Thank you!

Just love the cute little Barbie Dream House anvil !

Love your video and the anvil 2👍

Thank you so much 🙏❤

Truly riveting video.

@leatherpunk

5 жыл бұрын

Thanks!

Awesome video bub

👍🏻thank you for the help

Good video man

Matt, great tutorial!

@leatherpunk

5 жыл бұрын

Thank you!

Thanks leather daddy!

Thanks man

Thank you!

@leatherpunk

6 жыл бұрын

You bet!

Awesome thanks

I never seen those split rivies before. I thought the setter for them was only for line 20 snaps & etc. Thank You.

@leatherpunk

6 жыл бұрын

Thanks for watching! Ya those are essentially the same size and shape as a typical line 20 snap. For bigger rivets, you just get a bigger rounded tool.

Hi there, I have a project I want to work, and this is the closest I've come so far to finding a way to do it. I'm trying to find a way to add a domed piece of metal to a leather belt. Something similar to a domed or dapped coin. Do you know of any techniques where i might be able to secure it to the leather without ruining the domed shape? Thanks!

@leatherpunk

7 жыл бұрын

Hey! You could drill a hole in the center of the coin, set the rivets through the hole. When you hit the rivet, if the coin is on the bottom, it will still keep its shape. If you have pics you can send them to matt@leatherpunk.com and I'll take a look.

Thank Matt

Matt, question, which rivet type do find to be more durable holding multiple layers of material together? Thanks for the video.

@leatherpunk

3 жыл бұрын

Thanks Sean, The double cap is your gold standard for holding heavier material, compared to a single capped(tubular) rivet. For really heavy applications, you can switch from brass rivets, what I use, to copper rivets.

Thank you.

@leatherpunk

6 жыл бұрын

Thanks for watching!

Awesome video! I have to ask though because I don't have one.. is the anvil necessary or will any smooth hard surface work as well? I want to avoid having to get an anvil if i can. Thanks!!

@leatherpunk

5 жыл бұрын

Thanks. You can get by without the anvil, but it should be a metal surface.

If you don't have a baby anvil, take a metal dumbbell and stand it on end. Makes a fine improvised anvil.

Great video. Is there any consideration for quality of rivets? There are a thousand options on Amazon and I'm worried some of them would fall a part

@leatherpunk

5 жыл бұрын

Thanks. Check Tandy Leather. Anywhere but Amazon.

Hi Matt, thanks for the great video. You make it look so easy!! I'm making some beaded dog leashes using my husband's discarded bass strings and trying to come up with an idea of how to attach a leather handle to one end of the leash and a snap clasp to the other. One end of the guitar string has a small ring that I can loop a small key chain type ring in and loop the clasp on that, but the other end is just wire that I need to figure out how to attach the leather handle to. Do you think the rivet process you used in this video would be useful to attach the leather handle/strap to the guitar wire? Any ideas about what size rivet and where I would get the tools and rivets? I'm brand new at this, but love the look of the leashes I've made so far. Thanks in advance for your advice...if you need photos to answer, just let me know how to send them to you.

@leatherpunk

5 жыл бұрын

That's creative! For using a rivet the way you describe, kinda like screwing the end of an electrical wire onto an outlet, pinching the bass string in between the rivet cap and the leather, probably won't work well. I might suggest using Chicago screws instead. Rivets are too soft for what you're trying to do, the Chicago screws are much harder...and you'll be able to keep the string on course while you gradually tighten the screw.

Wonderful video! Where did you get your slab and what size is it?

@leatherpunk

6 жыл бұрын

Thanks! It's a 1 ft square slab, standard for leather work. I acquired it locally at a leather shop 10+ years ago, and I would suggest you try to find it in your area before ordering it through the mail(because of the weight), but if you can't, Tandy Leather sells it.

Hi , what do you call the first rivet you set ?

What size of rivet setter to use for 10mm snap button? Is it the 633 setter? Thanks in advance..

@leatherpunk

5 жыл бұрын

Some snaps need a full die set, with a specific anvil, and I believe the 633s are one of them, like this www.ebay.com/itm/Snap-Buttons-Dies-Mould-Set-For-655-633-831-Hand-Pressing-Machine-Spare-Parts-/382018618100

Great tutorial! I think this will work to connect old metal pieces together. I want the robots to look old not shiny. I guess there’s a way to make shiny rivets look rusty. Any ideas? Thanks again!

@leatherpunk

Жыл бұрын

Only naked steel will rust. Rivets are seldom made from steel, usually brass, plus they're usually plated. But there are brass rivets with antique finishes, that's about as close to rust as you'll get. I use a chemical called Rusty Red-F to get a rust look from naked steel. You can see an example here on my site: www.leatherpunk.com/collections/belts/products/rusted-studded-belt I have a recipe to give it this look, each pyramid has a slight mix of non rusted silver and various hues of red,orange, brown, etc. Kinda reminds me of the beat up gear depicted in the original star wars films. It's quite a process, you expose it to the chemicals, then neutralize it and then seal it.

Question: The rivets I got are pyramid with a small screw hole on the bottom (for the other end obviously). Now the tricky part is the screw-on side of the rivet is completely flat yet the actual nail is a “twist-on” screw… like a flathead screw. Kinda hard to explain but how would I apply it? Is it the same concept? Edit: What tools should I use? I’m doing this for a purse

@leatherpunk

3 жыл бұрын

I would just push up on the post with my finger while twisting/tightening the pyramid. You could also dab some Barge adhesive into the pyramid so that it seals for good. Or you could find regular screws that fit it.

I can't believe it has been 4 years since I last posted and am now finally getting around to working on that quick open folding knife holster. I was ready to buy some double cap copper or brass rivets from Amazon and then ran across your video again. At the 2:00 mark you show the barrel of your rivet being filled in and rounded. The rivets on Amazon are rounded but there is still a small hole at the top. Does that matter much? If it does then where can I buy the rivets you show. And, with your rivet, is the whole barrel body filled in or is it hollow? Final question, should I use copper or brass rivets? Is one better than the other?

@leatherpunk

3 жыл бұрын

That little hole at the end of the post doesn't affect things. Copper is harder than brass, great if the material is heavy, lots of layers.

Hi! I'm working on a project right now with slightly thick leather but still within reason for the double cap rivets that I have, and I'm finding that when I try to set them it either -Doesn't go all the way in on one hit or -Bends the post completely out of shape. Does my aim/arm strength just suck? Is there anything I can do to make this work more consistently?

@leatherpunk

23 күн бұрын

Just a guess, but it sounds like you're using a heavy mallet. It shouldn't weigh more than 1lb and should be rawhide, rubber, or something similar, not metal.

Great video. I'm trying to find a video on setting the star stud rivets . I'm thinking it's exactly the same way as your doing here.

@leatherpunk

2 жыл бұрын

Some stars use a center post, others have prongs, so it depends.

@djstumpy7399

2 жыл бұрын

@@leatherpunk cheers for responding .

Do you think the double cap ones would be fine for the jean jacket im making?

@leatherpunk

3 ай бұрын

I think it would depend how you're using them. You typically see copper rivets on denim because copper can handle being washed and it's harder than brass. If they're plated brass rivets and you're just doing it decoratively, there's probably no issue with it.

How well would that double rivet work for heavy canvas?

@leatherpunk

4 жыл бұрын

Yes, you can, but depending on your project, there may be better hardware options than rivets. Most rivets are meant for leather and are probably too long for canvas, people usually use grommets on canvas. If you do use rivets, make sure that the barrel length isn't much longer than your total canvas thickness, but again, I think you'll have a hard time finding rivets suited for canvas projects....that being said, there is a way to hand modify your rivets to make it work, you can snip off the ends and reshape them, takes time, but it does work well.

Can i use rivets for making pvc vynil clear bag??

@leatherpunk

5 жыл бұрын

You should be able to, but make sure your posts are matched to the thickness of your material.

Where can I get snaps with longer shafts for thicker leather?

@leatherpunk

4 жыл бұрын

Ken, this video is about rivets, but anybody selling a good variety of snaps will have the L version. L for long. Try Tandy.

Stop me if I'm wrong, but you're missing a tool for double cap rivets here. The bottom one is flattening out against the anvil without another concave metal cast which came with my kit. Unfortunately it's hard to stop the rivet shaft bending and the top and bottom caps going offset while using this tool. I don't know what I'm doing wrong but it is hard to line everything up vertically and in the centre of the cast before hitting. Sometimes they are fine but most times they go offset after striking. I think the shaft might be too long as I definitely cannot set the rivet with just one strike of the hammer (needs several whacks). They are a good 2mm above the leather when I place the cap on. Thanks for the video

@leatherpunk

5 жыл бұрын

The reason for the top cap to stay concave is so there's room for the post to push into it. Since the lower cap and post are one unit, there's really no performance need to keep that curvature on the lower portion. Plus, flattening out the bottom makes it more flush with your material. Your posts are too long for your material, if the caps are getting off center from each other.

@ArcanePath360

5 жыл бұрын

@@leatherpunk Thanks. I know there's no performance need of the concave cast on the stem side, but it's to retain a curved look on both sides. This is a look many people might want, and as it comes with the kit quite often (at least on Amazon UK) I thought it worth mentioning.

Hi there great video. When making the hole before inserting the rivet How do you know the size of the hole? And what do you use?

@leatherpunk

3 жыл бұрын

I use a regular hand held hole punch. It kinda looks like the concave tool, but with a fitting on the end. They come with different sized bits that you can screw in. You just eyeball it and test it out on a scrap until you find the bit that works best. Good luck!

@knightmareKnight1

3 жыл бұрын

@@leatherpunk thanks bro.

I'd probably use some type of cloth material on that anvil to protect the face of the rivets from scratches,or nicks

@leatherpunk

4 жыл бұрын

To protect the rivet cap(not face), you mean? No, that would not be necessary or recommended. The anvil face is very smooth and does not cause abrasions. Cushioning your strike would likely result in a poorly set rivet.

Is there a way i can prevent my rivets from bending in the leather?

@leatherpunk

5 жыл бұрын

Your rivets are too long for your material, if the post is bending and your caps are off set from each other.

@valentepolanco34

5 жыл бұрын

@@leatherpunk that may be it, i appriciate the response thanos got to go look for smaller ones

@leatherpunk

5 жыл бұрын

@@valentepolanco34 for small projects, you can snip off a little bit of the post and reshape it, but if you're doing it on a regular basis, def find the right sized posts for your project. Good luck!

@chairmankim9628

11 ай бұрын

​@leatherpunk I had that problem till I bought a rivet and grommet press. It is perfectly aligned. No more crooked rivets.

what press can I get that is compatible with rivet, snap button, grommet, & stud setting dies? :D or is it necessary to buy multiple presses

@leatherpunk

2 жыл бұрын

The fittings are going to be relatively universal, so it comes down to preference. Some machines' arms pull forward, some backward, others twist. Unless you're doing this for a living, or are a bit older and have a tough time with your hands, you probably can just get by with hand tools

@BLNTSMK

2 жыл бұрын

@@leatherpunk going to b makng tons of studded leather accessories Nd garments in general

@leatherpunk

2 жыл бұрын

@@BLNTSMK Stud setting has its own foot operated machine. The rest you can do with a table top press.

Are single rivets best for thinner materials? The posts are sometimes too long on double cap. 😅

@leatherpunk

3 ай бұрын

Yes, those double capped rivets aren't great for thin stuff, the single cap works better.

Is there any way to remove plastic ones without damaging anything?

@leatherpunk

3 жыл бұрын

Drill it out.

Hi! I'm late to the party but I'm curious if i can set rivets without those tools and minimal damage?

@leatherpunk

2 жыл бұрын

Without a concave tool and a rawhide mallet, you'll struggle. You can supplement your work surface, anvil.

why does the rivet head not get marred on the anvil?

@leatherpunk

4 жыл бұрын

If the anvil surface is beat up and not smooth, it will scuff the lower post cap indeed. Sometimes with cheap rivets, the plating will flake off also.

Im a newbie. What tool do I need to make the holes???

@leatherpunk

3 жыл бұрын

It's called a leather hole punch.

Does this work for leather keychain as well

@leatherpunk

2 жыл бұрын

Yes, it sure can.

Hey I have a rivet snap button it looks like it's been weld in but it might just be riveted in. I'm trying to remove it but I need to save the button. So I can put the button in another pair of jeans. How can I remove this without. Messing up the integrity of the metal button. 🙆🏻

@leatherpunk

Жыл бұрын

Rivets are not reusable.

So, rivets for leather, grommets for canvas, what about for denim or other materials pants are made of?

@leatherpunk

3 жыл бұрын

Andrea, the choice of hardware is really based on what you're trying to accomplish. The thing to remember is to match the right size hardware for your material. The material you're working with tends to dictate what the hardware is made out of. For example, on things that are machine washable, like denim, you use copper hardware, typically. Jeans are covered in copper rivets, that's what you see around the front pockets.

@andreal3239

3 жыл бұрын

@@leatherpunk thanks that’s really helpful

How to setup decorative chineese rivets with gemstone cup?:))

@leatherpunk

6 жыл бұрын

Not sure unless I see them, but those are usually held with two prongs, so it's probably more like setting studs than rivets.

How can i set rivets in a corner? Where i cant get my hammer in?

@leatherpunk

6 жыл бұрын

I'd have to see your situation to know for sure.

@GoodWithHands27

6 жыл бұрын

its a leather deck box

@leatherpunk

6 жыл бұрын

I'm not sure what a leather deck box looks like, but anything boxy can be a problem for setting corners. You may have to use alternative bonding methods, ie. sewing, or adhesives.

@GoodWithHands27

6 жыл бұрын

there is a rivvet squeezer im looking at but that is way over my price range i was looking for somthing a bit more compact and cheep

@firesurfer

6 жыл бұрын

Use a pin punch as an extension, or a long machine bolt. www.amazon.com/Stanley-16-226-Piece-Punch-Kit/dp/B000NIBFSK www.acemitchell.com/Pinsetter-Parts-Plus/PPPBLSRK.html

I have rivets on a pair of Prada sneakers I purchased. The rivets hold the Prada triangle logo in place. I ended up returning them because one of the rivets snapped off. I doubt this is the repair technique to repair the Prada triangle logo back in place. I think I'm going to return the other Prada sneakers that have the same rivets. I fear they may come off. The sneakers costs me $1070.

Hi where can I buy doble caps I need for .my londry car thx

@leatherpunk

2 жыл бұрын

Try Etsy or Tandy

Is this how you would rivet fabric like webbing?

@leatherpunk

4 жыл бұрын

Probably not, you'll want something with a short barrel and a wide diameter cap.

Sir, is there away to get aluminum rivet like this, if so can you tell me, i am making a chirava tongue for riveting please help ok sir😊🤝

@leatherpunk

Жыл бұрын

My supplier does not offer these in aluminum, and I am not aware of other options, sorry.

@jenijeni779

Жыл бұрын

@@leatherpunk it's okay sir😊 how much the rivet like you show in the video will cost per kg

My rivets keep coming apart, and tips?

@leatherpunk

4 жыл бұрын

Your posts probably aren't long enough for your material.

@mikecapurro4029

4 жыл бұрын

@@leatherpunk ive discovered I was treating them too delicately and not hitting hard enough

would this work with rivet style conchos

@leatherpunk

3 жыл бұрын

It depends on the exact piece, but generally Conchos are more like setting tubular (single cap) rivets. Sometimes you need a matching anvil for the concho to rest in during setting.

@justingayman1704

3 жыл бұрын

@@leatherpunk ok thanks was just wondering because I have small diamond shaped conchos but they come with two parts

@leatherpunk

3 жыл бұрын

@@justingayman1704 if that conchos will lay flat with the post up, you can probably set it like a double capped, if that second piece is a cap. If the conchos isn't flat, you'll need a matching die to hold it in place.

@justingayman1704

3 жыл бұрын

@@leatherpunk ok thanks

how much leather can fit in between these?

@leatherpunk

3 жыл бұрын

About 14 oz. weight worth of leather.

@ibrahimmohammedzaheer6452

3 жыл бұрын

@@leatherpunk thank you !

Very nice demo. But.. Where the heck can I buy rivets!? Can't find a well equipped rivet supplier in America.. grrr

@leatherpunk

4 жыл бұрын

For small quantities, use Tandy or Springfield Leather.

Where can i get single cap rivets ? All i can find is double cap rivets .

@leatherpunk

4 жыл бұрын

They're sometimes called open post rivets, Tandy sells them

@jake30966

4 жыл бұрын

@@leatherpunk I've just checked with Tandy and they've not got any , i'll just keep looking , thanks 👍👍👍

@leatherpunk

4 жыл бұрын

Try Springfield leather

@jake30966

4 жыл бұрын

@@leatherpunk I managed to find some tubular steel ones nearer to home that should do the trick nicely , thanks for the help i very much appreciate it .

How to remove badly set rivets from leather dog collars and leads?

@leatherpunk

3 жыл бұрын

I'm working on a part two for this video which will include rivet removal as well.

@disco324

3 жыл бұрын

Really looking forward to your videos especially the removal of solid brass double cap rivets. Also interested in where to buy solid brass double cap rivets please.

@leatherpunk

3 жыл бұрын

@@disco324 Tandy Leather

Cool now you called them double capped rivets for over 15 years ice been wearing Cistom made fiberglass and leather leg braves to walk all the people that build the braves and attach the Velcro and leather straps to the brave call them Speedy Eivets Same thing ?? Btw a hobby of mine is sewing heavy Vinyl and Canvass for Auto interiors and Boat Canvas and Vinyl and the setting tool looks like the one i use for doing snaps i use for boat covers

i used to shoot rivets on airplanes,i guess i can handle this.

@tiberiu_nicolae

5 жыл бұрын

ok cool

Hii

@leatherpunk

Жыл бұрын

Hi