How to service/rebuild/maintenance 6" GDP Portals | SuperATV
Тәжірибелік нұсқаулар және стиль
In this video Braden shows you how to disassemble, inspect, and rebuild a 6" GDP Portals. Proper maintenance of your GDP portals is important to keep them performing top notch for years on end. With hundreds of thousands of ride hours, there’s no portal lift in the industry that’s more used and more trusted. More riders roll on GDP than any other portal system. If you want trail-proven fortitude, you want GDP. Please feel free to comment below with any other questions you may have, we'd be happy to help.
Get your portals today:
www.superatv.com/categories/u...
#SuperATV #GDPPortals #PortalGearLift #IndustryLeader
Пікірлер: 6
Are these gen 1
Is it possible to put the drive gear in backwards? I can’t get my axle to come all the way through my portal
@SuperATVMedia
Жыл бұрын
Yes, this is definitely possibly. Each gear is slightly different side to side, one way will allow the axle to pull through as normal, the other way will either prevent it from coming through or will allow it to pull through too far.
So you can change seals without going inside the portal?
How often does this maintenance have to be done?
@SuperATVMedia
2 жыл бұрын
Hey there James. Maintenance schedules really vary based off of your style of riding. Oil changes should be done more often if you're doing a lot of road riding/frequently submerging them in mud/water. Rebuilding is only necessary if there is an internal failure. Our sales team would love to chat with you more and answer any other questions you have on GDP portals. Give us a call at (855) 743-3427 and we'll get you all the answers you need. Thanks for the support James!