I was able to replace the belts without removing the wires to the motor pretty easily. Good thing because I'm a crappy solderer!

@cassettedeckandwalkmanre-mw1hy

7 күн бұрын

@@sacflies well done !

Glad l found you! I love cassette decks! I even have this one. My favorite double.

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

Thank you ! My fav double as well

Another informative video. It seems you can open any cassette deck and know just how to fix it no manual needed. Looking forward to your next one.

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

The manual comes out when we have an electronic issue as they aren’t of much use when doing the mechanical side

Hi Rene, Fine Video & that’s a nice piece of kit Sir, I’m also fond of Yamaha Equipment, Think I own 6 x Yamaha Amps/Receivers now although 1 possibly 2 of them needs some TLC, Don’t ask! 😂 I know Twin Auto-Reverse Cassette Decks are generally frowned upon but I like them! Anthony - Birmingham/UK 🇬🇧

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

Personally I believe the mid and higher end Yamaha’s are still underrated, specially these days where you can pick them up for nearly no money and they perform really well

I have a Toa fd20 / Teac w6000R rebadge bought it from Japan it's pretty good and plays well and do everything as yours great machine

@cassettedeckandwalkmanre-mw1hy

28 күн бұрын

Very nice!

Nice , Good job , I just did the KX-W321 , bare bones double from 1996. It is a full metal case though with brushed aluminum front panel , and all Nichicon and Elna caps. Doesn’t have Dolby HX pro and is only single motor and servo transports. It hardly has any components inside compared to your 952. It was hardly used and Sounds and records amazing still. Your one of the only videos I’ve seen where you actually use the Nak 100 features. I will be getting that now for rebuilds.

@cassettedeckandwalkmanre-mw1hy

24 күн бұрын

The 321 is a good little deck , if you maintain it it will run for a long time I used to have the hardware version of the T-100 when I repaired decks eons ago , so I was very glad to find this software version , it works really well and I would recommend it !

@universalhead

24 күн бұрын

@@cassettedeckandwalkmanre-mw1hy Sweet , that’s pretty cool you worked with the real deal. I had to repair the little plastic gear ring the auto reverse head is attached to because it had shrunk and split , which made the fan shaped gear slip some cogs and then it would jam the mechanism. Not sure if the repair worked yet I haven’t reversed the head yet lol.

@cassettedeckandwalkmanre-mw1hy

24 күн бұрын

@@universalhead those gear below the head are prone to break when the head mechanism has a problem and the cannot be (easily) replaced as they are part of the rotate mechanism , maybe a donor head assy can be found ?

loving these videos!

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

thank you !

Its much easier to get the belt on the motor pulley if you just put the far left screw in on the motor plate. Then you can lift up the right side of the plate and put the belt on much easier. I couldn't get it on with the plate completely screwed down!

@cassettedeckandwalkmanre-mw1hy

7 күн бұрын

@@sacflies that’s the tricky part, getting it on with the plate mounted . You’ll get it after 30-40 decks 😁 but it takes a little practice

@sacflies

6 күн бұрын

@@cassettedeckandwalkmanre-mw1hy I'm sure you're right! I was asking myself "how in the world did he get the belt on the pulley so easily?". I am loving the 952! It is sounding fantastic. I oiled both motors and the squealing noise is gone. I had to adjust the speed, especially on deck 1, after replacing the belts. I just did it by ear. I streamed the album of the tape that I was playing and matched it up the best I could. I don't have all the fancy gadgets that you have! But I think I got it dialed in pretty good. Your video was extremely helpful! Thanks for posting it. I will be following your channel regularly. Thanks.

Bought a Yamaha K-340 at a flee market. Mostly buy Sony witch often need new belts. The deck plays without repairs and looks mint. The 340 looks a lot at the deck behind in your'e video. I think it's a higher number than my K-340 but the same family.

@cassettedeckandwalkmanre-mw1hy

18 күн бұрын

the yamaha belts are pretty good, i have seen 45-50 year old belts that are still good and probably better what you can buy today !! btw, we all love fish and marillion here ;-) the deck behind is a k-540 , same series as the k-340 !

@sacflies

6 күн бұрын

@@cassettedeckandwalkmanre-mw1hy My limited experience has led me to believe that maybe JVC used the best belts. I have the JVC TD-V621 and TD-V711 (with the nice wood side panels) and I think they have the original belts. Beautiful decks. But sometimes it seems the 711 locks up and won't eject the tape and none of the controls will work. But after I unplug it for a while it gets right again. Is there anything you can think of that would be causing that? I also have a Yamaha KX-930 that has been a great deck after I finally got around to replacing the belts!

Can you record from one deck to the other? I like that it has seperate rca out and in.

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

Yes you can

Hey Rene, being from the Netherlands, are you familiar with the band The Maureens? Love those guys!

@cassettedeckandwalkmanre-mw1hy

6 күн бұрын

@@sacflies no i am Not , sorry!

Interesting one flywheel is brass. Haven't run into that design before.

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

As far as I can remember this is the only one together with the kx-w900 that uses the same transport

Very informative video. Thanks. I just picked up this deck for $30. It was playing fine initially on both sides, but then deck 1 started to stop playing a tape randomly (I think you answered that problem with the black and silver pattern on the back of those gears) and deck 2 started squealing very badly while playing a tape (but not while fast forwading or rewinding). The tape would play but obviously something is wrong with the loud squealing. Must be a motor issue? Not sure if it's the main motor or the reel motor. Either way, would it likely just need oiling (sewing machine oil?) or could the motor be bad? If it needs oiling, where do I apply the oil? Any help you could offer would be greatly appreciated. It's a helluva deck! And I would love to get it fully functioning again. Thanks.

@cassettedeckandwalkmanre-mw1hy

21 күн бұрын

For the squealing, have you tried another cassette ? But oiling the bronze motor bearing might do the trick

@cassettedeckandwalkmanre-mw1hy

21 күн бұрын

Ps the bronze motor bearing is the bronze piece where the motor shaft comes out of the main motor (with the black flat belt) the reel motor has a similar bronze bearing , the smallest amount of oil should help if that is the problem

@sacflies

21 күн бұрын

​@@cassettedeckandwalkmanre-mw1hyYeah, I tried several tapes. I'm testing it now. With this test, at first neither side would play a tape (store bought tapes). It would just stop after a few seconds. Then I got a home recorded tape and both decks played it. I then played a store bought pre-recorded tape again and both sides played it. Weird. The squealing on deck 2 is more off and on today. Not constant. I will remove the transports soon and have a go at oiling the motors and maybe changing the belts, and having a look at the black and silver pattern on the gears to see if it needs cleaning. Is the black and silver pattern on both gears on each deck? Your video will be a huge help in tackling this thing, so thank you very much!

@cassettedeckandwalkmanre-mw1hy

10 күн бұрын

The black silver is on both decks , please use a dry q-tip to clean and no alcohol, alcohol may take away the black parts

@sacflies

6 күн бұрын

@@cassettedeckandwalkmanre-mw1hy I didn't see your comment until just now. I used a qtip with alcohol! It actually did remove a bit of the black and I quickly stopped doing that! I used a black marker to touch up the black section. Seems to be fine. Lesson learned! Thanks.

Do you think the belt could be changed by just sliding it off the flywheels/motor and sliding a new one into place? It's usually pretty difficult and involves a fair amount of dexterity and the right kind of hooks, tweezers, twine, etc. to pull off. I've done this on a different transport earlier without having to take everything apart but recognize that it may not be possible on this one. Great video, btw. Thanks!

@cassettedeckandwalkmanre-mw1hy

24 күн бұрын

If you really wanted to I suppose you could , but then the end of the flywheel is greased and that grease will end up all over the belt. It’s only a few screws to remove the motor plate and you can bend a hook from a paperclip , for me that is a lot easier than trying to fiddle the belt back in place without removing the plate with motor

@NewJerseyGuy

24 күн бұрын

@@cassettedeckandwalkmanre-mw1hy makes total sense! That grease is something that I would certainly keep off the belts and. reason enough to do open things up and do it the right way.

He rene love the work you do. What country are you from?

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

I am from the Netherlands 🇳🇱

@RonScortan

Ай бұрын

@@cassettedeckandwalkmanre-mw1hy Dat dacht ik al te horen :) doe je ook reparaties voor anderen?

@cassettedeckandwalkmanre-mw1hy

Ай бұрын

Alleen als het leuk is 😉