How to Select and Purchase Battery Inverter Cables Part1
In this series I describe my method for choosing a proper gauge of cable for the application based on length, continuous draw, surge draw, and other factors. While a novice user would be best served by following the user manual, a more educated consumer would be better served by following this selection method.
Пікірлер: 160
Your videos are just terrific . I am a newbie building my first solar rig. your videos are chocked full of lessons and your smooth friendly demeanor is really appreciated !!
Use any wire you like , just make sure to have a fuse or breaker sized for that wire. great info
complete part 1 and part 2 ...good result! Thanks man good Job!
Good info. Just a side note, on the front of the box, it says it has 3000 watts of surge power, not the 2000 that you thought.
the first manual is correct in saying you can use 2awg wire. 1500w divided by 12v is 125amps. there for going off the chart you pulled up, using 2awg wire would be fine to use
I do appreciate your recommendation, thank you so much. I like to install in to RV. If you have any good tips welcome. Any thing help, thank you what you do for a people, Milo.
Thank you so much, very informative and helpful. Appreciate it!
Great videos!
Awesome videos. Thank you so much. Please tell me if my thinking is incorrect here. I am building a battery box for a small camp. After all the money I have spent thus far, why wouldn't I just get 4/0 cables cut to length and terminated with rings? Can you have too much wiring between your components!
Like your video on how to select cables for inverter...
Thats 100% good info - thanks (still being outside US I would face some converting issues ;)
Thank you so much what do I need to power a 3 bathroom house who have everything a house should have
This may or may not be such a minor point, but 1500W/12V = 125A. That's important when sizing cabling and selecting the correct fuse.
I'm 9 years late but still ,Thank you!!🙏🏿🙏🏿
hey! i saw on one of your vids you bought a PowerJack inverter. Did yours have a voltage selector dial? what did you make of it?
Good video, Easily to understand
Best info ever found!
I'm sure you have gone over it before, but what is the address of the second AWG table that you used. Thanks for the video, very big help.
the welding cables AWG versus the THHN cables are able to drawn more current?
hi what size cable do i need to connect two battery ( 34agm 750amp) to a 30amp converter and what size wire from bat to converter.