guys, I made a new channel for my Tech videos. I'd love to have you there😍 check it out:👇 youtube.com/@aramtorkantech

Found your videos through the shorts that you made! Great job! You're a great teacher. The explanation of proportions was perfect for beginners not just for sculpting but also pencil renders and sketching 👍🏼

@AramTorkanArt

2 жыл бұрын

Really glad to hear that! Good luck🤗🌸🌿

@SzY_Invader

11 ай бұрын

@@AramTorkanArt do you happen to have a video on how to add a body to this?

I'm a seasoned Blender user but haven't tread far into sculpting. AI used this tutorial and one of your hair tutorials on my sculpt yesterday. I had more success with that sculpt than any that I've done in the past! You're doing great work and I appreciate your knowledge :)

This is a really great tutorial. It's amazing at the lack of good sculpting tutorials on youtube.

@AramTorkanArt

2 жыл бұрын

So glad it’s been useful! Thanks🤗🌸

I am learning so much about sculpting here. Thanks for your videos!

Wow! Such an amazing demonstration! This is my new favorite channel.Thanks!

Guys! Make sure to watch this video to learn how to start sculpting in blender😇👇 kzread.info/dash/bejne/omV8mcuBXdXQm6g.html

@leogil5933

2 жыл бұрын

Pleaser Give the project with the guide lines!!! That would be so good, Please!

@rajatrastogi6645

2 жыл бұрын

Which version do you use

@AramTorkanArt

2 жыл бұрын

@@rajatrastogi6645 Blender 3.0

@NathanialAshtier

2 жыл бұрын

It's not clear from this tutorial how you are using the annotation tool. You don't even mention that you are going to use it you just start using it, and you don't review it in the previous tutorial. I went back to the previous tutorial hoping that you covered it.

@AramTorkanArt

2 жыл бұрын

@@NathanialAshtier yes, I didn’t mentioned it because I just used it to show you the proportions, you don’t need to use that! It’s just for the goal of teaching😊👌

There are some small parts that have been left out (like how as a beginner when you start, pressing spacebar doesn't automatically bring up the search bar because you need to chance your settings), but it doesn't bother me because most of the time I can easily google a solution. I just wanna say thank you providing all these tutorials and short clips! They are very helpful and inspiring. A lot of people complained that the short clips should be slowed down, but I think they're great. You post a bunch of tutorials after anyway, and these short clips really show case that anyone can make good blender models if they are willing to be consistent put in the effort. So far everything has gone pretty smoothly for me, except for the re mesh part (which I don't blame on you). Every time I try to re mesh the head so I can add more detail, it either : -comes out with waay less vertices -no longer has the same shape/form that it used have -both Basically, instead of adding more detail, the quality gets even worse for some reason. I don't understand. I made sure the change the voxel size to 0.3m, to enable fix poles and volume and it still doesn't work... I tried messing around with the voxel size, and it seems like the higher the value, the less detail and vertices it has. I tried messing with adaptivity, and that doesn't work either. If anyone could offer a solution, it would be greatly appreciated. (Note : I can provide a video or screenshots if needed.) EDIT : For those that have the same problem, you need to make the voxel size *lower* , not higher like I originally thought.

@loldiana12321

2 жыл бұрын

Make the voxel size smaller 0.03, you are losing detail if you make it 0.3 because the units are much bigger

@Violet_Parakeet

2 жыл бұрын

@@loldiana12321 I already found the solution earlier (I really should have edited my comment afterwards), but thank you for trying to help! I appreciate it, and although my problem has been solved I'm sure this info will help someone else in need of it.

@ede2362

2 жыл бұрын

Yeah thank you I even failed with the spacebar thing😅 I thought it may be because she went into the "tablet mode" but I didn't know exactly what to do so thanks again 🙏

@ede2362

2 жыл бұрын

Also do you know if there's another way instead of using the spacebar? I like the default settings for the view and I'd want to keep them :/

@ede2362

2 жыл бұрын

Okay I'm a little stupid but I clicked on mesh and chose transform to sphere nevermind 😅

this video is really useful for making the proportions in 3d space especially when you already know some of the anatomy

your way of using annotation for proportions is a very good way to sculpt. Hatsoff

Your teaching style is very relaxed and paced perfect for me, I have to say one of the best blender teachers for this subject for sure. Can’t wait to learn more with you. Peace and good will to everybody.

@AramTorkanArt

2 жыл бұрын

Oh glad to hear that! I try my best to prepare useful videos😊🌸

Thank you so much for sharing this tutorial I learned so much from it, thanks again!

It's even kind of useful for 2d artists. Thanks for the amazing video. :)

@AramTorkanArt

2 жыл бұрын

Glad to hear that! Good luck🤗🌸

This is great, I was never able to do this because the proportions looked so strange before you were supposed to level them out

Thank you! I had no idea where to even start, great tutorial:)

This is very useful! thank you!

This is great stuff! 👍🏻👍🏻 pretty simple and straightforward

@AramTorkanArt

2 жыл бұрын

Thank you so much🤗🌸

Thank you very much for the tutorial. It helped me a lot.

really a great Tutorial, thank you !

Wow, This is great, thank you

Thank you very much. I learned a lot.

Thanks for sharing your workflow. It was very helpful!

@AramTorkanArt

2 жыл бұрын

Glad it was helpful!😊👍

thank your for this, very easy to follow

The video is perfect and you are awesome as a teacher, thank you!

@AramTorkanArt

2 жыл бұрын

Thank you! 😊🌿

Muchas gracias!!, Excelente explicación :DD!!!, you're awesome!!!

U are the best teacher ever

I like your method..it's very calm full..no fast.....

awesome video!

thanks so much man

Omg ❤️❤️❤️❤️ This is what I needed 😭 Thank you Aram. It is a surprise for me.😘😘😘 Thank you so much. Nobody has made a tutorial on head sculpting for blender like this. ❤️ Again thank you. You are my Guru. 😊😊😊 You rock ❤️

@AramTorkanArt

2 жыл бұрын

Oh really glad to hear that!🤗🌸 follow my tuts, I usually make 1 video per week🤗🌸

Great job!!

everything about u says youre ppersian . im also from iran proud of you . thanks for great teaching

مبدع

Thank you so much

This video should be taught in universities. I would love to put more than one like. Thank you very much for teaching so much.

@AramTorkanArt

2 жыл бұрын

Oh nice to hear that! I’ll do my best to make useful videos 🤗🌸

Very informative! Now I am curious how can I sculpt with alphas in blender like we do in Zbrush? Can you please show that next?

Thank you so much! I wish you could make a video for sculpting the mouth and eyes,thank you!

you make to look so easy wow

I'm thinking to start learning blender and I found a good montivation 🤣 good video

@AramTorkanArt

2 жыл бұрын

Oh nice! Start asap🤗🌸

perfect!

Looking for these guidelines almost a year! Thank you Aram Torkan ☺️

@AramTorkanArt

2 жыл бұрын

Oh nice to hear that! Good luck🤗🌸

Great job

Oohh,thats really amazing.Ifelt relaxed with your way of explanation.I Hope i alwaya follow your tutorials.My thankfulness.

@AramTorkanArt

2 жыл бұрын

Glad it was helpful!😊🌸

Thanks,you make it very easy.Wish you all the best.

@AramTorkanArt

2 жыл бұрын

you're welcome! glad it's helpful😊🌸🌿

Hi I really love animation s. I hv contents to show but I know nothing about animation. Watching from Nigeria

@AramTorkanArt

2 жыл бұрын

Welcome to my channel🌸🤗 good luck🌸

Wow , that made me to check out your other videos , a subsrcibe and some likes are not the price of your hardwork ,but a way to show some thanks to you

Not a "Blender" newbie user!, But always had a trouble sculpting face details especially for females!, But after this tutorial I really pushed the boundaries away and could do it better by practicing on it, So really special thanks for you!, But wanna notice that later it's going to be hard to fix the "High Poly" count after sculpting the details which i see it could be really helpful to use the "Dyntopo" instead of increasing the "Subdivision" quality!, But really honest when I say awesome tutorial.

Who else is re-taking this course with Nomad Sculpt? It's amazing on the iPad and the skills here transfer over.

This video change my life, i struggle with face sculpting, it become more easy and my face are better

Very Nice tutorial

You are the best ✅🌹❤🌹

Thanks for the information. I recently started sculpting a few weeks ago and this is exactly what I needed. I have a question I want to animate my character is retopology necessary for rigging the character? And can you please make a video on face rigging?

@AramTorkanArt

2 жыл бұрын

You’re welcome! 🌸 yes, for animation, you should do retopology ! Maybe I’d make some tuts about that in the near future🤗🌸

You are amazing at this sculpting. I know nothing about it. Hopefully that will change soon. I have my 1st girl hand built she doesn't have hands yet, still trying to get decent looking ears. I see now her head was not egg shaped from the top view either.

I love that lesson

@AramTorkanArt

2 жыл бұрын

Glad to hear that🌸🤗

very nice

Took me a week on and off sculpting to figure out why the smooth brush was messing up my sculpts, you’ve earned a subscriber

@AramTorkanArt

2 жыл бұрын

Oh thanks! Welcome🤗🌸

Juste what i needed thx 😁😁😊😊

@AramTorkanArt

2 жыл бұрын

Oh nice to hear that! Good luck🤗🌸

👍👍👍

useful

مرسی آرام

Very useful video. Thanks Miss Aram.

@AramTorkanArt

2 жыл бұрын

thanks! you're welcome😊🌿🌸

Love you 😍

@AramTorkanArt

2 жыл бұрын

Thanks🌸🤗

Legend 😍💣💣 Love from Sri Lanka 🇱🇰

@AramTorkanArt

2 жыл бұрын

Thanks! Welcome to my channel🤗🌸🌸

But… I really enjoyed the masking process that you used in a recent short. I’d like to see that.

👍👍👍👍

Very informative

@AramTorkanArt

2 жыл бұрын

Thanks! Good luck🤗🌸

GRET VIDEO

such an inormative channel

@AramTorkanArt

2 жыл бұрын

Thanks🌸🤗

😍

Shift Alt S for the perfectly round sphere, or just iconosphere with 7 subdivisions

Noice! 👍🏻

@AramTorkanArt

2 жыл бұрын

Thanks🤗🌸

ur voice is so pretty!!!

Will be great if you make 2nd part of this video where you sculpt all the details of the face...

@AramTorkanArt

2 жыл бұрын

sure!😊🌸

You are BEAUTY

Really good video Most times, they don't talk about those proportions when it comes to sculpting tuts

@AramTorkanArt

2 жыл бұрын

Thanks! Glad it’s been useful 🤗🌸

quality

🤩🤩🤩🤩

@AramTorkanArt

2 жыл бұрын

🤗🌸🌸

can you please do a tutorial on how to sculpt a stylized head in ZBrush please?!

great tutorial, just a quick question, what modifier are you using for the mirroring? it just doesnt look like a basic mirror modifier… is that a stylus thing? im new to blender, so sorry if this is a stupid question.

Great! Maybe one day try test my software Meshmolder.

@AramTorkanArt

2 жыл бұрын

🤗👌🌸

muito bom princesa s2

its realy help full i learn how to sculp from yan sculp chanel but i cant learn how to make face on his chanel

How did you do the spacebar part to give a menu?

hello mem pls make a tutorials about human face painting and colour mixing in blender after uv unrap

Thank you for this! When I draw with the annotate tool on the profile view for the ear and jawline, what I drew stays at x=0 and doesn't follow the shape of the head like yours (as you can see in front view). I tried annotate polygon but that didn't seem to do it. Does anyone know?

Can the next video please be about how to animate and move a character

@AramTorkanArt

2 жыл бұрын

About animation stuff, maybe I’ll make videos in the future🤗🌸

0:35, space bar for me just unpauses the animation timeline, how did you get to that search tab open?

I want to learn

beautiful voice

i love you

Appreciate the teaching..Just a question for you..when you are sculpting, how do you get both yellow dots in the yellow circle so that I can sculpt both sides at the same ty as I only get one yellow dot..and it's frustrating because I have to do one side at a time..please and thank you

@denizorsel1029

2 жыл бұрын

I guess you are asking for the mirror mode. Look up on right top (left of dynotopo feature) and toggle on X from XYZ. That oughtta do it.

@Simmymind360

2 жыл бұрын

@@denizorsel1029 Thank you.This is a fantastic Program

harf nadari❤

@AramTorkanArt

2 жыл бұрын

Thanks🌸🤗

I’m new to blender and recently started in college but I haven’t done much yet so I’m trying to learn from home. I thought this tutorial could help yet I’m unable to get past 35 seconds in thanks to the false instructions. Spacebar does NOT bring up a search with nothing in the video or description explaining why. Could you possibly add a fix to the description or your pinned comment? The rest of the video seems great so I’d like to give it a try once this issue is fixed. Also is there a reason you started with a cube rather than a UV sphere?

🙂

In The setup what soft is that the little one

Let's make the tutorial smooth, my sculpting can't be smooth like in the video

0:32 if you have "space" - play, then press "F3"

@kamuystreams941

2 жыл бұрын

you deserve all the love in the world

when i press spacebar at 0:34 it just activates the timeline i went into tab mode then pressed spacebar and still the same outcome

@AramTorkanArt

2 жыл бұрын

You should go to: Edit>>Preferences>>Keymap>>set “Spacebar action” to “Search” 🤗👌

@denizorsel1029

2 жыл бұрын

You may alternatively try hitting F3 for quick search to be displayed.

I still didn't got: how you know from where to start red lines, and how wide those two red parts must be?

can try tutor make animation on Blender

@AramTorkanArt

2 жыл бұрын

Oh about animation stuff, I don’t think so! Maybe in the future 🤗🌸

@NoobioZ

2 жыл бұрын

ohoho...can't wait for that🔥