I hate sanding. Its coarse, its rough and you need to do it everywhere

@CosplayApprentice

4 жыл бұрын

Hahahaha!!! Love the Star Wars reference! :)

You may be observing it in the video, but I think it's worth mentioning that you should sand in the direction of the rotation of the bit, as in, the bit would like to roll along the edge to be sanded. Going against rotation gives ridges.

Sand 😐 currently dealing with sanding right now this is such a great help ! Thank you

@CosplayApprentice

4 жыл бұрын

Yay! Perfect timing! I'm so glad it could help :) Thanks for watching! I've got tip videos coming out every weekday so make sure to subscribe cuz their plenty more to come :)

Thank you SO much for all these tips videos! I'm really bad at crafts, so your channel is going to come in super handy when I make my next project!!

@CosplayApprentice

4 жыл бұрын

Thank you! I'm so glad it is helpful! I'll keep making them as long as you keep watching! :)

This was well done, but I confess the main reason I'm liking and commenting is because your camera person sneezed and then apologized and I appreciate that a lot

@CosplayApprentice

2 жыл бұрын

Hahaha, awesome! :) Thanks for the comment! :)

I needed to sand the foam in my hockey helmet and I found you! Thanks, a hand sander was definitely too big

Thanks, man. I was really looking for some info about it.

@CosplayApprentice

4 жыл бұрын

No probs! Glad I could help! :) Let me know if you have any additional questions! :)

Thank you for your great tips! :D

Cool vid! I like how unlike in other videos on this topic you give us an up and personal look at using the tools and they’re results! It’s really helpful, one question though, where did you / where can you get the stone rotary tip?

@CosplayApprentice

3 жыл бұрын

Thanks! :) I got mine with the set that came with my Wen rotary tool I got on Amazon. But you can get sets or individual bits on Amazon and at the hardware store. Here is a link to some on Amazon :) amzn.to/3nMjTtz

That was interesting. Arrived here while doing research for a project... I am making a hammer head to make a second larger hammer for my haunted house character Jack Hammer.. using an EVA yoga roller and almost all of them have bumps od some sort so trying to smooth it down lol

Thanks!!! :333

Thanks for this, can you also explain the different grits and when should we us them? Really suck at sanding need to practice

@CosplayApprentice

4 жыл бұрын

Thanks for watching! Yes that is a great question and I'll add that to the list to make a video on it! :)

I’m curious would you be able to sand channels (for placing metal rods to strengthen a prop) without a dremel? Reason I ask is that I’m probably going to make maybe at least one~two Cosplay costumes but I know I won’t have any usage for the tool after I complete the sets.

@CosplayApprentice

3 жыл бұрын

You can sand a channel by hand, you may want to wrap sand paper around a dowel or something to do it. It will take a very long time to do it by hand. I would highly recommend spending $20 on the Dremel tool and save yourself a ton of time and frustration. Or you can use a wood burning tool/soldering iron to burn in a channel to do that as well. :)

You saved me my dude my pops wanted a noob saibot mask who could double as a corona virus maks and dang I didn't know how to sold the rough sections.

@CosplayApprentice

3 жыл бұрын

Yay!! I'm so glad I could help! :) Thank you so much for watching!! :)

So, are you just applying a light pressure with the stone head? Also, do you know if the wtfoam come back in-stock on Amazon at some point?

@CosplayApprentice

Жыл бұрын

Yes, and the stone head will eat away less than the sand paper barrels. :)

is a Sanding paper an alternative if I don’t have/ have access to a dremel?

How about smoothing out exacto cuts lines on regular FOAM BOARDS? Im trying to make fish but then the boards have spaces visible correct? hmmm, no good....

sand. I need to get used to my dremel more but I can't get it smooth enough and it shows through my primer. thanks for this video!

@CosplayApprentice

2 жыл бұрын

Hope it helps! :) Let me know if you have any additional questions. Using the stone bit really helps improve the smoothness factor. :)

Awesome tutorial and tips. What tool would you recommend for sanding larger pieces of foam? Ive been told detail sanders are a bad idea and orbital sanders can be very hit or miss. Ive heard Sheet sanders and belt sanders are good, but the only belt sanders readily available here are handheld, though I could just turn it upside down. I seek your guidance oh great foam god!

@CosplayApprentice

3 жыл бұрын

For the most part I would try to avoid sanding large areas of the foam wherever possible. If you need to, the type of foam you are using will make a big difference in how smooth you can get it and what type of sander would work the best. What is it that you are needing to sand the large area for and what type of foam are you using? :) Thanks for the wonderful compliments! That made my day!! :)

@origamininja380

3 жыл бұрын

@@CosplayApprentice Hi, thanks for replying so quickly. Its mainly if Im making a big piece like a sword or some other large scale weapon prop and need to lets say bevel an edge or something. Ive seen people using dremels but they always seem to leave a somewhat uneven bevel, but maybe thats just the experience of the people using them, but thats besides the point. Basically it's for if I need to bevel foam or maybe even sand down textures like the texture found on floormat foam. Thanks for your tips already, I really do appreciate the help. :)

@CosplayApprentice

3 жыл бұрын

If that is the case then I would definitely go with more of a belt sander option. Even if it it handheld you can clamp it down to a bench or something to secure it. But that is a good way to go for long sections of sanding. For the beveling it's even better if you can get a table top one that has an adjustable angle on the plate. That will allow you to be more precise about your bevels. :)

@origamininja380

3 жыл бұрын

@@CosplayApprentice Fantastic, I'll look into getting one after I get my smaller scale pieces. Thanks so much for your help. :)

@CosplayApprentice

3 жыл бұрын

Yay! Of course! I'm happy to help! :)

What is your advice on cleaning all the foam dust off the final product? that stuff is everywhere and i want it full cleaned off before i seal and paint haha

@CosplayApprentice

3 жыл бұрын

I would recommend a combination of using a can of computer air spray and a microfiber cloth. The air should get most of it and can get into little cracks and then the microfiber cloth will help catch anything left behind :)

Could I use a sandpaper

I'm here to learn sanding . . . brand new so I'd say "sand" but I haven't even gotten started, so we'll see.

@CosplayApprentice

Жыл бұрын

Glad you are here :)

Do I need to wear like anything for safety when sanding foam

@CosplayApprentice

3 жыл бұрын

Yes, it is best to wear a dust mask and safety glasses when sanding foam. :)

Can i use solder to smoothen eva foam?

@CosplayApprentice

4 жыл бұрын

Maybe for the edges but it will burn through the foam. I use a solder to get certain designs burned in on the foam :)

sand. hate it. Dremmel gives me indentations. sandpaper gives me rough edges. Hope your tips here will help.

@CosplayApprentice

4 жыл бұрын

Here are a couple videos I have on sanding already, let me know if these help or if you still have concerns that I can address specifically in a future video :) This one is on sanding Eva Foam - kzread.info/dash/bejne/eINqpbuAc8nAY7g.html This one is how to get rid of sanding fuzzies on #Evafoam - kzread.info/dash/bejne/lKV6lciNlL2Xprw.html

hello! i'm trying to make mold for a project. part of it, i'm using EVA foam. but i'm kinda worried that cement would stick to the stick foam when it completely cures. would heat sealing the foam lessen that problem? what would you suggest?

@CosplayApprentice

11 ай бұрын

To make sure I understand the situation, you are trying to make a mould to pour concrete into and want to use EVA foam as part of the mould but you are worried the concrete will stick to it, is that right?

@louiecanaria9960

11 ай бұрын

@@CosplayApprentice yes Sir. that's correct. i'm trying to make a mould for a cement pot(box shape). i'm trying to combine sintra and eva foam. coz i'm not sure if silicon mould can hold the whole shape for 24 hrs. sintra to hold the shape and eva for some details.

@louiecanaria9960

11 ай бұрын

i'v seen some videos and they're using styrofoam. but i'm not sure if i wanna go that way since it can be messy afterwards. so i'm trying to see if eva foam is a better replacement.

@CosplayApprentice

11 ай бұрын

I haven’t tried this before but I think heat sealing is a good idea, it will help close up the pores in the foam so there will be less to grip to. I wonder with concrete if using something like baby powder or something like Vaseline would be better for helping prevent the concrete from sticking as well? Sounds like a fun project!! Let me know how it goes! :)

@louiecanaria9960

11 ай бұрын

@@CosplayApprentice will try those things as well. thank you Sir! and my apologies, i know you're channel isn't about what i'll be making but as soon as you mentioned heat sealing, i knew i had to ask. haha! i appreciate it. :)

Sand 😭😭 I've used Kwik seal for the longest time to cover the roughness of the foam

3:24 Frequency high sound warning, that dremel loud

trouble: have foam, I build, I heat it, shape it, I seal the foam, I plastic, I paint, and then I try to clear coat, but the clear coat dulls the shine of the paint? What am I doing wrong ?

@CosplayApprentice

2 жыл бұрын

I stopped clear-coating my stuff a while back for the same reason. What are you using to clear coat? I've seen people use this with some pretty good results to clear coat projects. www.doitbest.com/shop/cleaning-supplies/cleaning-chemicals/floor-finishes-and-waxes/floor-finish/pledge-27-oz-revive-it-floor-gloss-finish?SKU=601986&gsf=t&gclid=CjwKCAjwloCSBhAeEiwA3hVo_Q_AiXfxILH0zfQovwGVkcpchlU5UwymfiJK0vA3rr-_Ic0A-L0R3RoCZB8QAvD_BwE

Sand!

Sand!!!!

Desert

Bess you! Haha

Sand!!!

@CosplayApprentice

3 жыл бұрын

😃

Sand

@CosplayApprentice

2 жыл бұрын

Yay!

Dune

Yeah sand

Cant put sand if youre watching the video before you start working on sanding >:3

S a n d

@CosplayApprentice

4 жыл бұрын

Thanks for watching!

1:29?

@CosplayApprentice

3 жыл бұрын

Hahahaha that was my wife sneezing 😆

i’m sayin

sand

SANDddd

Sand.

@CosplayApprentice

3 жыл бұрын

Perfect! :)

Sandddd

Sand...

I don't like sand. It's coarse and rough and irritating and it gets everywhere.

@CosplayApprentice

3 жыл бұрын

Hahahaha :)

Sand lol

damn i didn't use a mask hope i dont die :(

"i hate Sand. It's coarse, rough and irritating and it gets everywhere."

i hate sand

Sand sand sand Eva foam is terrible!

@CosplayApprentice

3 жыл бұрын

Yeah, sanding EVA foam is not fun! I try and plan out my patterns and builds to avoid sanding as much as possible! :)

John 3:16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish but have everlasting life.

Sand

sand

Sand

Sand

Sand

Sand

Sand

Sand

Sand

@melodybutte-blatt7641

4 жыл бұрын

What grit are you using on the sanding bit?

@CosplayApprentice

4 жыл бұрын

That is a great question. It is one of the standard one that came in a kit of Dremel accessories and I'm having trouble finding details on it. I'll have to check when I get back home and let you know :)

Sand

Sand

Sand

Sand

Sand

Sand

@CosplayApprentice

2 жыл бұрын

Woohoo!🎉

Sand

@CosplayApprentice

3 жыл бұрын

Perfect!!! :)

Sand

Sand

Sand

Sand

Sand

Sand

Sand

Sand

Sand

Sand

@CosplayApprentice

3 жыл бұрын

Yay!! :)