Thank you so much for this video!! I just did this myself in about 45 mins, 6 months pregnant!

@rickv8913

2 жыл бұрын

I can't believeable.

@funkyed985

10 ай бұрын

Incredibly impressive!

I love this guy! “Pay attention now.” “Check your work.” So methodical with nothing extra. Tremendous help, thanks!

The video saved me from hiring a professional. It was extremely helpful

Perfect Instructions. I really don't know how this could be done any better. Whoever edited and managed this presentation is top notch. It took me a little longer because my washer is over 10 years old and the bottom screws were rusted. Thanks very much.

@appliancepartspros

6 ай бұрын

Glad you were able to complete your repair. If there is anything we can help you with in the future please let us know.

Just want to give my gratitude to the guy in this video. Would've never figured out how to do it without seeing this. Thanks.

This dude is amazing! I watched several other videos but was getting hung up on steps they had left out. Everytime I went back to this video, he addressed the steps that others left out! The only thing that no video I watched included was how to get the stupid light in and out. I'm at the point of placing the new boot on and really hope I can avoid removing the counter weights.

Thanks so much for this video! I had a slightly different model, but was close enough that I was able to get it done! Saved me a boat load of money to have someone come do it! Very detailed instructions! You are a life saver!

I couldn't have done this replacement without this video. Thank you!! ❤

@appliancepartspros

28 күн бұрын

You're welcome!

Simon, your video is absolute perfection! My mother had a warranty on her washer and it was leaking. The guy came out and told her that was normal, despite an obvious tear in the boot. When I got to town, the warranty was expired. Convenient. Anyway, I'm stubborn, so I decided to replace it myself. I searched Google and thought I had made a mad mistake... until I found your video! I watched it several times, gathered my tools, and then played it throughout the disassembly, repair, reassembly. It was such a smooth repair and I am so thankful! Took me 2 hours. I have also picked up some fun Simon Sayings! Love the accent. Thank you again!

@appliancepartspros

4 ай бұрын

Glad you were able to complete your repair! If there is anything we can help you with in the future please let us know.

Thank you for the excellent video. It took me 3 hours to get this done but it was reasonably straightforward. The rotted old seal is gone and the machine is now working nicely with the new seal.

This video is extremely accurate and thorough. It helped me change the seal like a charm. Thank you so much AppliancePartsPros!

This was very helpful and like having an uncle kindly show you how to perform a repair. Part wasn't available from them, but really glad Appliance Parts Pros has videos for installation. Well timed and detail oriented.

Only video on internet which clearly show every detailed step to show how to change this seal. At-least for this specific model. Thanks Sir. Very helpful.

Perfect instructional video. So easy to follow and no nonsense. I had my laptop with me in the laundry room and paused the video when needed. I wish all KZread instructional videos followed this format. Thank you for posting a simple and thorough video! I completed it from start to finish in about an hour. I saved some money and I was feeling pretty proud of myself after I did it. No leaks and I have bragging rights :)

@appliancepartspros

5 ай бұрын

Glad you were able to complete your repair! If there is anything we can help you with in the future please let us know.

You sir are a genius! I just reinstalled the door boot seal. Your video and clarity of instruction were perfect. Thank you so much!

My only extra tip is that, if you slide the washer forward just a foot, you can prop up the front with a paint can in the middle and get at the bottom screws that way. Thus I did not have to disconnect the hoses and could work without really moving it very much. Excellent step by step video. My VRTplus (boot# DC97-16140N) was only a little bit different and I could not have done it without this video.

Thanks, for the excellent how to video. Just did mine, do to mildew build up and it still works great. Only took about an hour, and that includes giving everything a thorough cleaning.

Excellent instructional video. Every step clear and concise. Much appreciated. Only problem I had, was BOTH of the spring loaded wire seals are very rusted, and frozen. Had to get new.

this video perfectly walked me through the entire process without having ever even opened a washing machine for repair. great tutorial, save me a lot of $$$$ being able to do it myself

Thank you! This video was very thorough and straightforward, saved me time and money. I did use a 7mm socket on a screwdriver handle for the inner ring screw because I couldn’t access it with a Phillips without stripping it.

Thanks a lot! Your video just extended my Samsung washer's life for another 5 years.

Excellent step by step instructions. Fairly easy job for a DIY. I wanted to clean the seal (not replace) so i soaked it overnight in 50-50 bleach water solution. Came out like new. Saved a ton of money. Thank You

Thank you for the excellent video. I needed to clean my seal. I removed it using your steps. Soaked gasket in bleach solution overnight and the results were amazing. No need to purchase new seal now. I also removed the complete soap dispenser assembly to make cleaning it easier. Not including the soak time on the gasket, this was an hour and a half job. I then ran Affresh through the self clean cycle. It’s like having a new washer. Very easy DIY project. Easy way to save lots of money.

Thank you so much for this! So easy to follow, and it's one less thing I have to have my husband fix! I appreciate this video so much!

Thanks again for making this video, step by step worked very well, I was able to swap out the seal.

Thank you for this video. These instructions were very clear and fixed the problem. It saved a lot of unnecessary stress and money.

This is a quality video. You can hear him clearly and see what he is doing. Excellent job! Helped me so much.

Thank you very much. Mine got damaged and the particals of the diaphragm got all of my laundry. Without your video, i won't be able to replace mine. Thx again

Thanks so much, Samsung has been a nightmare for washing and drying clothes, but this helped me tremendously

Great job on newer Samsung. Very very helpful thanks. Made the job very easy. Boot swapped out no issues all done and washing clothes. Thanks for the quality parts and help.

Wasn't exact model but walked me through this like cake! Thanks for the video. Super easy don't stress over the clamps

Extremely helpful! I just finished replacing my boot. Thank you so much 🙂

Thanks for this video. I use a wheelchair for mobility and am not able to stand. After watching this video I was able to instruct my young second cousin to do this repair in under 30 minutes.

Thank you Simon! We couldn't have done it without you!

Yep. This video saved me some money for sure. Thanks for your easy to understand and professionally done instructive video.

Used this to remove and clean my seal. I have a very similar model but keep in mind that the boot seal clamp isn't always clockwise to remove. Mine looks almost the same but removes counter clockwise. You could accidentally break something if you crank it too much and not realize that. Appreciate the vid!

@appliancepartspros

3 ай бұрын

You're welcome!

This video saved me a $$$. Only thing- manufacturer changed the boot seal clamp design on the washer drum to different type than shown in this video. THANK YOU GUYS FOR THIS VIDEO AND FAST PATS SHIPPING!!!!!

So clutch, thanks! Btw @4:54 when removing the clamp my screw needed to be turned counter-clockwise to loosen, it depends on the model. Also I had to take some components off of my old boot seal and thread them through the new one, it took some effort but they squeeze through just fine. Other videos don’t remove the counterweights but removing them helps access the screw on the inside clamp on the left. Cheers!

@stefan.agnello9772

2 жыл бұрын

I wish I caught this comment before I stripped the screw head turning it clockwise. Such a detailed video and got me far until now. I hope others don't follow this step and caution is placed about turning the screw the wrong way!

@vbozek3393

Жыл бұрын

After 45 minutes and tore up knuckles I found your comment 💀 thanks for saving me my sanity!

Thank you for this video! My outer clamp broke and your technique for installing it (11:57) worked perfectly!

Thank you for this!! Very easy to follow. Saved me a ton of money!

This was so helpful, and spot on. I was able to make the same repair with the help of a buddy. Thank you so much!!!!

just swapped this out, it looks more intimidating. This video was awesome, it took me a little under an hour. Thanks for sharing!

This tutorial is very detailed. That helps very much, except loosing the screw on the ring should be counterclockwise in my case. Thanks for this video, it helped me to complete an impossible work!

Thank you ! I was able to do it. This video is great, the person explained every step very well.

Thank you for going slow and making it easily understandable for a woman! I got it done with no problems!!

What a great instructor!

Fantastic video. I had a different model but similar enough it made it super easy. So glad I saved a few hundred and did it myself.

Thank you! Super clear and easy to follow. Saved me lots of time and money!

took about two hours... all user error! thanks so much!

@appliancepartspros

7 күн бұрын

You're welcome!

Thank you for this video. Such detail!! Made doing this at home possible without having to make a service call 🙂

Success!!!!! Thank you so much for this for I was able to replace the lines that was dry rot and the boot was worn. Samsung machine front loader was worth it. It lasted me 7 years before it begun to leak.

I am not handy but I had the tools and as a new homeowner, I need to be. This video was almost absolutely perfect. The only difference in my samsung washer was the screw on the inner seal, aka the metal ring closest to the drum/back, I had to screw counterclockwise to loosen and clockwise to tighten. That's what I would have expected, of course, but this video is clear about the need to do precisely the opposite. Not a big deal though, and otherwise, I actually found this really easy. Thank you!

Great video! One additional thing to look out for is if the boot is leaking, it will sometimes allow to leak into the front door, which requires you to loosen the bottom door screw under the window to let the water drain out.

These guys always make great vids. They have saved me a ton of $$$$$$$$. Thanks again!

I echo my things along with so many others. This video provided me the exact step-by-step instructions I need to replace my boot seal. It took me a little longer than most other people here it seems, but it’s Halloween and I had to help my kids with some of their trick-or-treating and I needed to go to Home Depot at least once because one of the screw heads were stripped. Could’ve been easier to follow every instruction, daunting, though it was to almost completely disassemble my washing machine lol

@appliancepartspros

9 ай бұрын

Glad you were able to complete your repair! If there is anything we can help you with in the future please let us know.

Thank you - your methodical and precise instructions made replacing the seal easy to do.

@appliancepartspros

9 ай бұрын

You are welcome. If we can help you with anything in the future please let us know.

Thank you so much for such a clear explainer video. I was able to do the work myself in about an hour and saved the hassle of getting a technician over to my house... not to mention the money saved.

@appliancepartspros

11 ай бұрын

You are welcome! Glad we were able to help you out.

Thank you! Just replaced ours 🙌

Thank you so much for this video. It was extremely helpful in performing the replacement of the boot seal in my washer.

@appliancepartspros

10 ай бұрын

You are welcome!

Thank you so much!! Great video and perfect angles to see how to perform the repair

Excellent communication on how to replace the part.

Thanks from Puerto Rico and youve been of great help

Thank you very much sir. My replacement came with no instructions. Great guide.

Great video! Took me about 1 1/2 hours to do. My inside circle metal gasket ring was slightly different on my Samsung. Instead of the clockwise to loosen it was a different type of clamp and was counter clockwise to loosen.

This was super helpful. Thanks!

Seriously, thank you so much.

Thank You my good people. Thank You so much. Ordering a new gasket from you folks ASAP.

@appliancepartspros

9 ай бұрын

You are very welcome. If we can help you with anything else please let us know.

Thank you. Your video was amazing and will be very help. I will be purchasing the part at your site!!

Awesome video. I followed the instructions and was able to do it. No problem thanks a lot

Thnk you so much this step by step was very helpful

Thankful for this great tutorial.

Great video. I'm not that handy but you made this job pretty easy

What an incredible video. Thank you. Y'all saved the day.

@appliancepartspros

6 ай бұрын

You are welcome. If there is anything we can help you with in the future please let us know.

Thanks for the vid! Great instructor!

Awesome just installed boot on our washer, thank you for this video

This video saved my butt!! Thanks for the detailed well done video

@appliancepartspros

5 ай бұрын

Glad we were able to help you out! If there is anything we can help you with in the future please let us know.

Great instructions. Worked perfectly.

Thanks for the video, came in handy doing mine today

@appliancepartspros

5 жыл бұрын

You're welcome!

Thank you!! Very well done video.

Very helpful. Thank you.

Thanks for your instruction. It made the job super simple. Only difference on mine was that the inner boot clamp was NOT a left hand thread. I think they messed it up at the factory and used it anyway.

Thank you, this video was very helpful to me.

Thank you!!!! This video just saved me about $300 From what a professional appliance repairman had quoted me!

Thank you very much for the video and all the details. I've just changed mine today, really happy!!! Cheers 🍺🍺🍺

thank you SO much for this tutorial! My husband and I were able to fix our machine in the course of a single evening. Very thorough instructions! (Also, can anyone place his accent? We were trying to figure out where he's from - Canada + somewhere else?)

Perfect instructions. Thank you.

@appliancepartspros

5 ай бұрын

You are welcome. If there is anything we can help you with in the future please let us know.

Thank you for the video it was east to install door boot with your help :).

Very nice step by step video... made it very easy.

@symbritava

4 жыл бұрын

Thank you very much I was able to fix my washing machine myself thanks a million

Amazing video 🎉 thank you!

Awesome - thanks!!

Very helpful video! Just have to take your time.

Just used this video to do this repair, thank you very much

@appliancepartspros

11 ай бұрын

You are very welcome! Glad we were able to help you out!

Very helpful thank you

Awesome video! Very helpful resulting in a DIY savings by ME! Thank you.

@appliancepartspros

6 ай бұрын

You are welcome. If there is anything we can help you with in the future please let us know.

Great video. I only had to unscrew the wire holding the seal counterclockwise instead of clockwise. I struggled tying it by mistake.

@frankj9270

4 жыл бұрын

Same here

@stefan.agnello9772

2 жыл бұрын

I should have read the comments. Stripped the screw head turning it counter clockwise like the gentleman instructed. Wow, so close on saving money for a new appliance 😒

Very nice tutorial, the only different thing I ran into was the inner seal clamp screw was different on mine, thanks a bunch only took me 1.5hr.

@appliancepartspros

9 ай бұрын

You are very welcome. If there is anything we can help you with in the future please let us know.

Thanks! this video was perfect

Awesome. Thanks for the great video.

Was able to do this repair without taking off the front, but it required small hands and tools for tight spaces. THE CLAMP ON SOME MODELS SCREW/UNSCREW REGULARLY -- NOT IN REVERSE. You can tell by checking to see if the clamp is tension based (as in this video) or a plain-old bolt+washer+nut stack. If you end up stripping your screw, you can use a 7mm socket wrench to get it off. Or, hack-saw it off and replace it. Part DC97-14618H.

Thank you 🙏🏽