How To Roll Kraft Paper Tubes for Fireworks
Ғылым және технология
𝗞𝗿𝗮𝗳𝘁 𝗣𝗮𝗽𝗲𝗿 - www.amazon.in/Box-Brother-Eco...
𝗣𝗮𝗽𝗲𝗿 𝗟𝗲𝗻𝗴𝘁𝗵 𝗖𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗼𝗿 - rb.gy/9sqosj
𝗩𝗲𝗿𝗻𝗶𝗲𝗿 𝗖𝗮𝗹𝗶𝗽𝗲𝗿 - www.amazon.in/Digital-Caliper...
𝐁𝐮𝐲 𝐑𝐨𝐜𝐤𝐞𝐭 𝐓𝐨𝐨𝐥 𝐒𝐞𝐭 𝐢𝐧 𝐈𝐍𝐃𝐈𝐀 𝐕𝐢𝐬𝐢𝐭 - www.passfirerocket.com/
How To Roll Kraft Paper Tubes for Fireworks
#fireworks #rocket #firecracker #papertubes #kraftpaper
Пікірлер: 52
This method is very useful for those who want to continue as hobby for fireworks. Thanks for the share brother.
@PassfireRocket
Жыл бұрын
Thank You So Much Sir For The Support
there is something about this tutorial that is so damn satisfying
@PassfireRocket
Жыл бұрын
Thank you so much 😄
almost died trying to pull the tube out
@PassfireRocket
8 күн бұрын
Cut the tube into smaller portions also let it dry before you pull. And if possible put wax.
Great video! Good craftsmanship. Tubes are expensive and shipping costs are expensive as well. Thank you for the video. Be safe!
@PassfireRocket
Жыл бұрын
Thank you very much.
The work is well done, and the method seems to be good. But the music, is wonderful. So good that I will have to turn this back to watch the video properly
@PassfireRocket
5 ай бұрын
Thank you so much bro
What is your flash powder composition?
Si quieres sufrir de una tendinitis en la muñeca por andar cortando el papel con cuter, adelante
The tube wall will be denser / tighter where your hands were pressing on the mandrel compared to where your hands werent pressing on the mandrel :)
@PassfireRocket
Жыл бұрын
I'm sorry but I'm having little difficulty understanding. Can you explain what are you suggesting
@colspyro
Жыл бұрын
@@PassfireRocket The tube will be rolled tignhter where your hands are. The longer the tube, the more difficult it is to get an even tightness unless you have really big hands :) I test the burst strength of the end sections of my homemade tubes on the press so i know how much pressure each tube will take :)
@PassfireRocket
Жыл бұрын
Oh yes yes. That's why I roll them 1 inch instead of 0.75
@colspyro
Жыл бұрын
@@PassfireRocket I generally go 1/8" wall on 0.5" id tubes, 3/16" wall on 0.75" id tubes. If you roll a 6" long tube and a 20" long tube, the 6" tube will be stronger because you can apply constant pressure with your hands over the full length of the 6" tube as you roll it :) If you make a lot of tubes with different id`s, you should consider making a rolling machine. kzread.info/dash/bejne/n3V_krKPobngYqQ.html
@PassfireRocket
Жыл бұрын
Yeah, a rolling machine would be quite useful.
Thank you pyro brother ❤
Nice. Use this method for my rockets
@PassfireRocket
Жыл бұрын
Thank You
Very nice vid 👍👍
@PassfireRocket
Ай бұрын
Thank you 👍
What Glue you Use on this?.
@PassfireRocket
5 ай бұрын
Wood glue
So, similar to the Skin Man's technique (also on KZread): no glue in direct contact with the former.
@PassfireRocket
Жыл бұрын
Do you roll your own tubes or buy them?
@goodmaro
Жыл бұрын
@@PassfireRocket Mostly roll my own, but it depends. I started with Weingart's instructions, white glue, and metal formers. It's just as he says, you need lots of glue on the former to act as a lubricant -- and I *still* had some stick and have to be cut and scrubbed off. With the Skin Man technique I could use wood dowels as formers. However, for a demanding application -- 1-lb. (3/4") rammed BP core burning rockets -- I bought the tubes offered with the tooling. And I use salvaged tubes for a lot of applications. Kyle Kepley sent me a box of 5/8" ID heavy wall millenary cores to use as guns for cakes. I get a lot of larger diameter tubes as salvage too. My first 1.75" shells I made from a shipping tube. I started with paper bags for paper, but that was partly recycled. Eventually I bought a roll of virgin kraft.
@PassfireRocket
Жыл бұрын
Oh. Okay. And do you press everything (comets, spollettes, etc) or hand ram
@goodmaro
Жыл бұрын
@@PassfireRocket I hand ram everything but whistle cases of 1/2" diameter, which I press using a hand grapefruit squeezer. Sometimes I press 3/8" whistles. Smaller I press with my own weight.
@PassfireRocket
Жыл бұрын
That's nice. And one more thing have you worked with potassium picrate whistle?
Try to use another white paper,it reduces your time,less weight and heavy load capacity
@PassfireRocket
11 ай бұрын
Oh. okay. Thank you for the suggestion
How to make glue ????
@user-gm3vy2pl2t
5 ай бұрын
Just buy it in the Store
walls to thick.
@wachiwachiwa8885
2 ай бұрын
Maybe it is for rockets
Way too thick
Looks like a big mess you made.
Instead of wood glue, how do you feel about a “paper mache” paste made out of either dextrin or SGRS?
@PassfireRocket
Жыл бұрын
Definitely. You can use those. You can also use wheat paste. But wood glue is readily available.
@goodmaro
Жыл бұрын
The instructions in AFN for blender rockets use cardboard (from cereal boxes) *soaked* in wheat paste. They take longer to dry and don't make quite as hard a case, but they can be rolled directly on a wood dowel without sticking quickly to it. Probably would also work with vinyl wallpaper adhesive.
@PassfireRocket
Жыл бұрын
@@goodmaro Kraft paper tubes are quite easy to make and when dried gets rock hard
@colspyro
11 ай бұрын
@@goodmaro For the strongest tubes use 70gsm virgin kraft and a glue with a high solids content (ideally >50%). Neat PVA wood glue is usually 50% solids but its too thick to work with. Most wallpaper adhesives are around 20% solids.
@Hrackoe
10 ай бұрын
Wheat paste is literally like flour and water. Ten times cheaper than wood glue. Just an FYI. 5cups water 1 cup flour. Works like a charm.