Big thumbs up!! I am right now working on my son's little RC which is a Remo Smax. I am converting it from brushed to brushless. Unfortunately the motor direction was wrong and I didn't know how to fix it. Thanks to this video I did it! Another new thing learned today for sure 😁😊👍👍

this was a perfect fix for me I bought a cheap Goolrc esc motor combo for my mini lst2 the esc programed the throttle in reverse and I don't have a program card yet this worked perfectly thank you

@casperround Glad to hear that the video helps.

Thanks for taking the time to post this video, Our troublesome RC Car is alive once more.

This was extremely helpful

Thank you, this helped and it was right to the point 🙂

Thanks a lot bro you just saved my day

Thanks for saving my day!

Thank you for posting this vid. I couldn't understand why when I transferred all of my electronics from a plastic tub to an aluminum one, the motor ran backwards. I tried reversing the switch on the transmitter and technically it worked, but it was wide open throttle and I couldn't adjust the trim enough to make it stop. So thanks for this vid. I posed the question on a RC forum, and no one answered and I'm missing my stupid fast truck. It was a EMAXX, except that I replaced the dual motors for a single brushless. Now I can go play. lol I have four other EMAXX as well. But those are staying relatively stock.

Great, this helped me!

Thank you very helpful

Two words. THANK YOU!!!!

@DJpikkupiru true all you need is to reverse 2 of the wires on the motor is all.

Thanks helped me out

You...Sr... rock..., my ebike motor reverse direction and it was driving me crazy... this fix it Ty.

Thank you. I’m using a car esc on a plane. Fixed.

Thanks very much.

Thank you so much that really helped me out now my car runs a whole lot faster👍👍👍👍

simple as that hum, thanks

If you use servo reversing on your transmitter you could effectively be running the reverse function of your speed control to go forward, this usually has the effect of bringing in a delay when you brake. Better to swap the two wires and leave the transmitter throttle reverse alone. Also, swapping two wires only applies to three phase motors (which pretty much all brushless RC motors are).

@stpbasss3773

3 жыл бұрын

Only applies to non sensored brushless

@TheAegisClaw

3 жыл бұрын

@@stpbasss3773 Holy 9 year reply Batman

@stpbasss3773

3 жыл бұрын

@@TheAegisClaw lmao

excuse me.. i have a ezRun 5.5t brushless motor and the sensor wire were soldered onto the motor it self .. does that mean i have to take it off or is there any other ways to reverse the rotation of the motor...

Thanks, mamba monster x

Does doing this not hurt the motor?

@MegaRallycar yep, fuel, 20 sets of tires, 3 rb c6 engines, one os speed, all the other stuff that i said, and alot more

@Rcstampedeking what company did they copy ?

how can we switch from having leds

What should I do if my reverse is stronger than your forward

@onepiecetrapremix4263

4 жыл бұрын

jjones1118, switch the outer 2 wires

@erevofreak96 All true. And nice d8. Those kits are awesome.

Sensorless only as far as I know...

@MegaRallycar thanks man :) lucky i got it for free, its got jr servos, os engine, and a spektrum radio system... i wouldhave never been able to afford it :P

Super

Will reversing the rotation of a brushless motor on purpose damage it in any way?

@gamercat7004

Жыл бұрын

I tried this method and times I noticed my esc on my traxxas got warm in a few seconds. And unplugged it because I feared of burning out an esc.

No go for my Mamba Micro X. Its faster forward now, but brakes only in reverse.

I have the Reventon SPEED PASSION SPEED CONTROL pro and im using the KO Propo EX1 FHSS radio, the issue i have is that i cant configure the ESC to run THE MOTOR IN THE CORRECT DIRECTION the only way the speed control will run the motor after calibrating the speed control to the KO Propo EX1 is switching channel 2 in reverse BUT then the motor runs in the wrong direction I have tried programing the speed control several times in normal mode in channel 2 but the motor will not run at all in normal mode Can can you swap wires on this setup THIS IS A SENSORED BRUSHLESS SETUP ????

@ValdeckRocher

8 жыл бұрын

+skippy813 Hi Skippy, I've got the same problem : impossible to reverse the motor... You may not swap the wires on a sensored motor. Impossible to calibrate correctly with the reverse at the radio.

@Skippy813Net

8 жыл бұрын

If you have gear diffs you can flip them over and this will fix the rotation problem.

@ValdeckRocher

8 жыл бұрын

skippy813 No it's impossible. There are pulleys and belts on my driftcar...

@Skippy813Net

8 жыл бұрын

I know in Speed passion trouble shooting section if motor runs in opposite direction you can swap any two wire connections between esc to fix motor direction. BUT THIS ONLY APPLIES TO SENSORLESS MOTORS.

@ValdeckRocher

8 жыл бұрын

Yes, I know that. And what about if you've got a sensored motor ?

What if it’s a sensor motor can you still do that ?

@lowq6989

2 жыл бұрын

Yeah

@MegaRallycar yes, but its also bad, because of the cheap quality, it might break easily and people could have a bad first expirience... i started with a slash 2wd, upgrades are cheap, its tough as it is, and i had an awesome expirence with it... i worked my way up, and know have 6 kits, one of which is a hot bodies d8

i wonder if skrillex knows you took some of his beats?

can you tell how we can do this reversal with esc programing ?

@erevofreak96 But its a good why to help people get into the hobby too. And if they cant afford the name brand ones they could just get a different one. Win Win but cheap quality.

It doesn't work on a 48V 1500W brushless e-scooter motor it blows the fuse. Now what?

@sarangtamirisa5090

6 жыл бұрын

Hey, did you figure it out? If so, please help me Using the same motor

I tried this before but now my esc and motor heat up a lot.

@gaganb

7 жыл бұрын

PLEASE GIVE ME DIRECTIONS ON HOW TO CALIBERATE THE INTELLISPEED ESC ....

Brushless motors only? You can do this with brushed motors.

@erevofreak96 What!!! for free?

my car gose full throttle wen i turn of the raido how do i fix this??

@TheRockisSmokin the madbeast is kind of a knockoff of a savage flux

You guys sent me as fucked up tacón thriller with defects i have spent more than 100$ on tring to fix it

@mtblover98 the fuck? never switch BATTERY wires

Its less than 10 seconds long so its legal

This doesn't work at all I have a fan in a air purifier. Brushless. I need to fan to run the other way. I swapped two positive and negitive wires and nothing. I swapped the negitive with the 3rd wire. Nothing.

@mtblover98 Every single car... Oh.... thats why. You just have soo much money that you just like the switch the wires around for Forth of july smoke bombs. Oh... I got cha I got cha. Have fun with your money. All yours.

@mtblover98 WHAT? You switch the battery wires. That is the dumbest thing ive ever heard.. If you switch the wires around it will smoke the esc, short out the battery maybe fry a RX. Thats soo stupid. Im glad im not your car

stop copying other companys cars

DO NOT DO THIS IF YOU'RE SENSORED