Hands down simplest to follow yet most detailed video I've seen. I watched it once and doubt I have to even go back and watch it again because I don't remember something. Other videos throw too much filler in with the important stuff it's hard to keep track

I would never have found that step down adapter without the link. Thanks so much.

I've always said: when it comes to electronics, there's a solution for everything! You only need to look in the right place, then again, there's always the other side of the coin. Which is; a darn lifesaver like you on the other side. Thanks buddy.

Thank you for the step by step process! It’s exactly what I needed! Subbed

Thank you for this video. It has helped me install a double aftermarket stereo and retain my backup camera

You have helped with the Sirius radio install in my Tacoma now you have helped with this back up cam retention, don't know you but your amazing and easy to understand. I appreciate you

@jptheinstallguy

2 жыл бұрын

im glad to hear that. it really makes making these videos worth it

@timfrancis6774

2 жыл бұрын

@@jptheinstallguy will send pictures if would like. you have helped alot i appreciate you

I know it’s an old video but I appreciate ya bc I’m going to be trying this on my Honda Ridgeline soon

Thank you so much finally somebody that has a video about this I've been searching for about 14 months with no prevail, I literally went to Best Buy last week because I was ready to give up this was the only step that was preventing me from upgrading my audio system and it's an SUV I kind of do need the feature. And it comes with factory backup camera thank you, I understand for you it's an everyday thing but we'll give it a try, where can I find the inverters that's really all we need right tap into the ground power and then video receiving, delivering RCA video signal to stereo

nice vid!

Bro many thanks gelped alot trying figure 2017 brz i was able get it to work

Great vid bro 💪🏽💪🏽💪🏽👍🏽👍🏽👍🏽

@jptheinstallguy

3 жыл бұрын

thanks man💯💯

Wonder if this will work for a 2016 kia.forte koup sx?

Awesome videos bro. I have a 2010 Chevy Tahoe that I bought 2 years ago and has a pioneer stereo and I took it to a audio store to see if they could connect the stock rear view camera but they said they couldn't connect it to the stereo, do you know why they couldn't connect it?

Love your videos bruh. I was hoping you could help me with an install issue. I’m installing a head unit in a 2012 Toyota venza with factory Navi/cd. I’m trying to find the factory backup camera wiring to retain the factory camera in the new unit. Would you happen to know the wiring location of the factory camera?

Mine has a back up and a passenger side camera on the mirror for when I hit the right turn signal, do you think I could still have both with this?

I have a 2009 Camry XLE. factory radio/navigation screen with aftermarket Natika backup camera. Will this work?

I seen this wire kit but is it for certain cars ? or all cars ?

What’s up man? Curious to know if they made a harness for a 2012 Prius by now that you know of. Thanks I’m advanced.

Would this work for the around view camera on NIssans, too?

Would this work on a 2018 ram 1500. I have been with out a caMera since I Installed my aftermarket stereo.

What is the web site to find the wiring diagrams?

I have this connected to the aswc-1 in a 2015 Nissan Rogue select but when I switch to reverse it just shows a black screen with the lines. No video. What am I doing wrong? Also the steering wheel won’t program

I brought the metra harness wit da 6v and i still dont have a signal can u help ?

On the kenwood you have the button to view the cam but mines black how i get that work

Can you help me to find the signal cable from the rear camera I just install the rca but now Idk Wich cable goes the signal to the camera when I put reverse it’s a 2012 ram 2500 diesel Laramie I want to keep the factory camera with an aftermarket radio

say brah i just got my boss audio single din the shop hooked it up it looks like u looking threw a fish bowl the tech said the aspect ratio is offwill this fix it ???

Hey Bro, nice video. I have a question can I just cut a yellow rca cable and isolate those wires and splice to my factory harnes. I have a 2012 Navigator. I know my wiring is different. But the concept the same?

@NOMADIKVISUALS

Жыл бұрын

What did you come up with? I'm having a headache with the camera . Let me know Thanks

I have a 2015 sentra sr with factory camera what will I need

Where is the trigger wire for the radio ? How does it know when car in reverse

Okay stupid question first time installing a radio on a car with a back up cam 2018 civic lx I have a harness that is back up cam ready and has 2 wires hanging off it it clips into a harness and has 6v power red, a black wire and the video plug what do I do 🤣

You didn’t explain in detail where that 12volt reverse wire came from in fuse box

I have a Kia Soul 2016 and I put the aftermarket android radio but the back up lights won’t turn on when the car is on reverse what should I do

Is this the same for a 11 Sienna

Thanks bro...i have lexus is300 model 2011 and i am planing to android head unit but i want my OEM back up cam so my question is the wire u mention will work same way in my car or it need something else???

@Flowman2100

Жыл бұрын

Did you ever figure it out? I'm here for the same question

Using the pioneer unit will you still have ability to change the the view options like wide angle, top angle, overhead etc. ?

@MrAceAwesome1

4 ай бұрын

Nope

Is the axxess conversor for specifics models or can be used in any model? I have a kia sportage 2018 and this conversor shows is only up to kia sportage 2017.

@jptheinstallguy

4 жыл бұрын

It can be used on any car that has a 6volt cam

Just the video I needed! I installed an android headunit into my 18' Camry. The reverse is triggering the headunit to focus on the backup camera, but it's not receiving any video input. Do you think I'd be able to just install the RCA wire adapter and be good to go?

@njdan301

3 жыл бұрын

My pioneer radio acting the same way. My kenwood, jvc, boss, and stock radios all get it without an issue SMH

@jsteezy80

3 жыл бұрын

Probably because you're pushing 12 V to the camera. You need a 6 V step down like hes showing you

Will these steps work with a 2014 Honda CR-V exl

Can use the on an 09 370Z?

looking for backup camera for crv 2011 ex-l nav. anyone knows the colors for the 4 wires?

@MrAceAwesome1

4 ай бұрын

Axxess sheet should help

Hi JP, I am using this exact harness for my install. Here is my question - I want the factory camera to be able to come on even while driving. Where do I hook up the power wire for the harness (Blue/white). If I put it with the reverse wire, wont the camera only work on reverse? Can I add it to the red power wire for the radio? It has the steering wheel control on it too.

@jptheinstallguy

4 жыл бұрын

if you want the camera to work while your driving instead of powering it with the reverse wire use ignition so it stays on when the car comes on

@richbeckman470

4 жыл бұрын

JPtheinstallguy thanks for the reply. I guess my worry is having too much on that wire. I have the camera, steering wheel control but still want to add the kenwood dash cam. Plus an amp down the line. How do you know when you have too much on the wire?

@jptheinstallguy

4 жыл бұрын

@@richbeckman470 i know what you mean. you really dont want to put to many accessories on a single circuit you might want to use a relay. as a matter of fact i think that might be an upcoming video i do on teaching a little about relays and how you can use a bunch of accessories of it.

@richardbeckman8523

4 жыл бұрын

@@jptheinstallguy That would be great! I know how they work, just not sure where to pull the power from.

Quick question bro I have a Kenwood radio. Do I need to connect the purple reverse wire on the back of the kenwood radio to the reverse wire and the blue and white wire on the converter together?

@jptheinstallguy

4 жыл бұрын

Yes cause the reverse wire from the car is going to trigger the screen to flip also you need 12v on the blue w/ white so it can output 6v on the blue w/ red so yes you got it right

@Clickerenowwww

4 жыл бұрын

@@jptheinstallguy right now I currently have it where once I press camera button it shows. I like it that way. I have it hooked up to the red 12v battery wire. It won't kill my battery? I know it won't just want a second opinion lol. The wire should only be on when the car is running?

@jptheinstallguy

4 жыл бұрын

@@Clickerenowwww as long as its on ignition and not constant you should be good that way the camera cuts off when you turn the car off

@Clickerenowwww

4 жыл бұрын

@@jptheinstallguy I just checked my harness and the red wire says ignition.

Jp help me out please I’ve got a 2020 Chevy 2500 I had to remove the back tailgate for a dump bed now I am trying to hook up a camera because I in dire need for a reverse camera I know where the OEM harnesses all of that stuff but I want to wire up a different camera to the dump bed please help me is there anything I can get to wire up an aftermarket camera to the OEM harness. The wire I tie into looks almost like a fiber optic cable

@ecooutdoors

2 жыл бұрын

Looking for a harness that plugs into the oem rear plug reverse cam is in oem tailgate and I prefer not to gut it

have you worked on any Nissan Nv200, If so what are the wires that are used for it. Thanks Onic

I thought this would work but wasn’t sure. Thank you! Just I ordered and I’ll update in a few weeks

@jptheinstallguy

3 жыл бұрын

let me know

@earlgraves5568

3 жыл бұрын

Will this same thing work on a 15 rav4 with a pioneer dmh1500 nex mine has a purple reverse jawn

So wait you connect the blue/white and the blue/red together on the 12v cable???

Can i use it for toyota tacoma 2017

@jptheinstallguy

2 жыл бұрын

just depends on if the wire colors are the same, but the process most defiantly will be the same

do the moving factory camera lines still stay?

@jptheinstallguy

5 жыл бұрын

If your factory camera had moving lines then yes they should. Some lines are built in the camera and not the monitor so it depends on the car

@aashour6

5 жыл бұрын

JPtheinstallguy I have a 2017 rav4 limited with the dynamic lines so I’m assuming it will work then

@jonathanmorales-pi2nm

5 жыл бұрын

Hi jp never do a Camry 2014 I want to retain the cámara lmk

@Super3ver

4 жыл бұрын

Amru Ashour did you replace the factory radio? And what cables did you use, I attempted to replace it and I was not able to get any sound! And of course, the camera didn’t work. Which is why I got here

@aashour6

4 жыл бұрын

Everardo Rubio I never ended up doing it because I got busy. However I plan on doing it soon. Your best bet is to order a ready harness from crutch field with all the needed adapters

Modified life gives wire diagrams also

@jptheinstallguy

Жыл бұрын

Another great option

Boom. Haha

Is it just me or is the red he’s referring to Purple?

were you boght that???

they literally make aftermarket adapters no need to hack up the factory harness

@jptheinstallguy

Жыл бұрын

1. Every car doesnt have a camera retention harness. 2. Most Camera retention harness only retain signal not power so it's only an rca in a harness and still come with step down converter cause all factory cameras are 6v. 3. If your Camera image is in the rear view mirror you'll have to use the same steps to re route signal to aftermarket radio if you want image on different screen. 4.this shows people how to do it if they vehicle doesn't have those options.

@jptheinstallguy

Жыл бұрын

1. Every car doesnt have a camera retention harness. 2. Most Camera retention harness only retain signal not power so it's only an rca in a harness and still come with step down converter cause all factory cameras are 6v. 3. If your Camera image is in the rear view mirror you'll have to use the same steps to re route signal to aftermarket radio if you want image on different screen. 4.this shows people how to do it if they vehicle doesn't have those options.

It's a step down converter, not just some resistors.

@jptheinstallguy

Жыл бұрын

A step-down converter is literally 2 resistors that brings your 12 volts down to 6 Volts when 12v and ground hit both sides of it