Ayun oh ! May pwede nang sundan. Salamat Bro, ayus tong mga video mo. Salamat sa mga Tips.

Ganon pla ang restoration ng hydraulic na yan..well done bro

Thank you for this it's really helpful.

good job but you should use red hydraulic oil so winter or summer doesn't affect closing speed.

Very informative and helpful vedio. Nice content

Wow this is very informative. Thanks for sharing how to do it.

@ahmedshaker7538

Жыл бұрын

ممكن رقم للتواصل

Thanks sa sharing...very useful one

Hi . How did u open that big allen key slot?

Galing mo naman mag fabricate ang hirap kaya nyan

Good job bro

thank you

Jaipur me h khya

Mahusay ang iyong pagpaliwanag po kaya meron akong natutunan at kaya ko na ring amusing kung may masirang mga pintauan sa kuwarto namin at iba pa

Nice one

Gracias por tu trabajo, buen video. Saludos desde Cuba, que aceite usas?

@andammixed

Жыл бұрын

I used a Lube-V hydraulic oil,,, or you can also use a synthetic oil

@felipaogarpi1606

Жыл бұрын

@@andammixed Gracias una vez mas

🤗🤗🤗🤗

Nakapatalent nyo po sa ganitong bagay..

I have a Corbin Series 110 that is leaking. Are all of these pretty much the same on the inside? Other than sanding those parts, is the only part you replaced the O-Ring? And how do you know how much oil to put in? Do you fill it up? Thank you for this video!!!

@andammixed

Жыл бұрын

Yes only sanding the shaft to remove the scracth so that D O ring wil not be damage, the oil is just 50mL or less if over you can drain a little bit

Que cantidad de aceite lleva??

@andammixed

Ай бұрын

aceite 40 como el que usan en el aceite de motor de automóvil,100ml

I can add fluid if is already empty?

@andammixed

9 ай бұрын

Yes sir you can but first fix the leakage so that will not be empty

Which liquid use???

@andammixed

2 жыл бұрын

Just used a hydraulic oil #10

Where you buying the Rings

@andammixed

10 ай бұрын

Try at hydraulic store or auto supply

I don't want the door to close by itself. i just want it to slow down the closing when there is a strong wind. can i remove the spring?

@andammixed

Жыл бұрын

Try to adjust the 2 adjuster using flat screw, you can control its function,,the way of adjusting is turn left or right little by little or in a degree,,its depends on your choosen function,,

@HoangBinhVNBG

Жыл бұрын

@@andammixedthankyou, what kind of oil, i can use enginer motor oil ?

@andammixed

Жыл бұрын

You can try it even motor oil

Mahirap din pala paank erestoration ang door closer hydraulic dami pang proseso

Boss saan nakakabili ng O ring nyan door closer?

@andammixed

4 ай бұрын

Marami sa auto suply boss kunin mo lang sample mo alam na nila yan

Your camera is too close to the parts

@andammixed

Жыл бұрын

Im sory for that 🙂

Boss tanong lng po paano sa maliit ganyang di hnd na nabalik pag magssarado.boss mgvlog po uli kau sa maliit nman

@andammixed

Жыл бұрын

Parehas lang po laman nun maliit boss yun function sa loob ganun din po

@jeromedudley8644

Жыл бұрын

Paano po Yun pag hnd na nabalik

@andammixed

Жыл бұрын

May adjustment screw po yan sir dalawa po may plus at minus adjust niyo lang po unti unti habang nakakabit sa door niyo at tuwing adjust niyo close or open niyl lang po yun door niyo para matest niyo

door closer oil number please

@andammixed

4 ай бұрын

Any motor oil you can use it

@MisbokulMisbokul-td3ww

4 ай бұрын

@@andammixed hydraulic gear oil 68 number use me but no success solution please

@andammixed

4 ай бұрын

@@MisbokulMisbokul-td3ww use a motor oil or gear oil it works better

Sir pano mo natanggal yung malaking allen key slot? Anong tools ang ginamit mo? Thank you in advance 😊

@andammixed

15 күн бұрын

Ginamit ko po jan ay turnilyo yun pang truck ,, kunin niyo lang po yun size ng allen jan tapos punta kayu junkshop marami po yan na size ,,