How to Restore Registry Backup in Windows 10, 8, 7 to Fix Blue Screen Error and Repair Boot Failure

On this video, I will show you how to restore Registry backup in windows computers in order to fix blue screen of death or BSOD error, that can prevent you from booting normally.
Restoring Registry to previous registry store, will repair start-up failure and many other issues if the backup was enabled in a computer operated with windows 7, windows vista, windows 8 or windows 10.
However, this property is no longer enabled by default in the new windows versions, starting from windows 10 version 1803.So, you have to check your windows version and if the registry hives are present in the RegBack folder before trying to restore your registry.
How to fix an operating system wasn't found black screen error:
• An Operating System Wa...
How to fix Your PC/device need to be repaired BCD error:
• How to Fix Error Code ...
how to fix automatic repair loop of Inaccessible_Boot_Device:
• How to Fix Automatic R...
How to fix automatic repair couldn't repair your pc windows 10, windows 8.1, windows 8, windows 7
• Automatic Repair Could...
Playlist with Solutions for most common boot loop and Start up problems with black or blue screen:
• How to Create a Bootab...
The video contents will be divided into 7 parts:
- How to boot into Windows Recovery Environment.
- How to determine the windows partition.
- How to check windows version and build number.
- How to check if there is a copy of registry backup or not.
- How to restore registry backup manually or using command prompt.
- How to enable the registry backup on windows 10 using CMD
- Important notes
Second part: How to determine the windows partition:
2.a . Open command prompt or CMD
Also you can open it by pressing the Shift+F10 keys from the keyboard.
2.b. Type BCDEDIT and hit Enter.
2.c. Determine the windows partition From OSdevice entry, under Windows Boot Loader.
In may laptop, the D is the Windows partition.
2.d. If BCDEDIT failed to show you the BCD data, Execute the following command before it:
BOOT REC /REBUILDBCD
Third part: how to check your windows version and build number:
3.a. Open command prompt and execute BCDEDIT command to determine the windows partition:3.b. Execute the following commands:
CD /D D:\WINDOWS\SYSTEM32Replace the D: with the windows partition in your computer.3.c. Type WINVER and hit Enter.
As you can see, my windows edition is 10, and the version number is 2004.
This version of windows didn’t support registry backup.
Fourth part: How to check if there is a copy of registry backup in REGBACK folder or not.
4.a. Execute BCD EDIT command to determine the windows partition.
4.b. Execute the following command to see the contents of the REGBACK folder:
DIR C:\WINDOWS\SYSTEM32\CONFIG\REGBACK
(Replace the C with the letter of your windows partition)
Also make sure the path changed to the REGBACK folder as shown.
5.a.1. Change directory in the CMD to CONFIG folder using this command:
CD /D C:\WINDOWS\SYSTEM32\CONFIG
(Replace the C: with the letter of your windows partition)
5.a.2. Enter the following commands one by one to RENAME the registry hive files in the CONFIG folder:
REN SAM SAM.OLD
REN SECURITY SECURITY.OLD
REN SOFTWARE SOFTWARE.OLD
REN SYSTEM SYSTEM.OLD
Renaming the current Hive files in CONFIG folder will keep them from lose, so you can restore them by just deleting the new files then revert their names to previous names.
Notice that we didn’t rename the DEFAULT file in CONFIG folder, because the DEFAULT file in the REGBACK folder has a size of zero.
5.a.3. Execute the shown commands one by one to COPY registry backup files from REGBACK folder to CONFIG folder.
copy C:\Windows\System32\config\RegBack\SAM C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBack\SECURITY C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBack\SYSTEM C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBack\SOFTWARE C:\Windows\System32\config\
5.a.4. Use Up and Down arrow keys from the keyboard to explore previous commands and modify or reuse them.
Also Notice that we didn’t copy the DEFAULT file to the CONFIG folder, because the DEFAULT file in the REGBACK folder has a size of zero.
Sixth part: How to ENABLE the registry backup using CMD6.
a. Open CMD as admin6.c. Execute the shown command:
reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Configuration Manager" /v EnablePeriodicBackup /t REG_DWORD /d 0x1 /f
Seventh part: Important notes:
How to restore registry windows 10 to default.

Пікірлер: 253

  • @knowwork9
    @knowwork92 жыл бұрын

    Man i got no files from regback folder its 0 and 2 dir?? Need help what can i do

  • @ValiumMediaTech
    @ValiumMediaTech3 жыл бұрын

    *Buy me a cup of Coffee* 🙂❤️: Paypal.me/ValiumMediaTech

  • @luiscrhl3247
    @luiscrhl32473 жыл бұрын

    Sos un capo muchas gracias men te debo la vida, un fuerte saludo desde Perú

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    De nada por la agradable respuesta

  • @Saruar360
    @Saruar3603 жыл бұрын

    Awesome! You're voice amazing! Waiting more creativity in the future time,Boss

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Thank you for your nice feedback 🙂

  • @sprankyy

    @sprankyy

    2 жыл бұрын

    It's a generated voice

  • @saber5401
    @saber54012 жыл бұрын

    After trying this RegBack folder was empty and my win 10 only got a blue screen with Chinese options, registry completely gone. Luckily I had a clean of my system, I took a winPE I had laying around and deleted the config folder and copy and pasted from the clone. I restarted and the system was back to normal. Frankly I have never gotten windows repair to work, especially since I have tons of 3rd party music software. As soon as I install other software, startup repair never works. Way to go Microsoft... technology saving you time by spending days trouble shooting, unfortunately in that department apple kicks ass, don't get me wrong their corporate practices these days are B.S.

  • @jimmyanggadaputra349
    @jimmyanggadaputra3493 жыл бұрын

    finally, thanks a lot, it's work

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    You're welcome!

  • @raven391
    @raven3912 жыл бұрын

    Please reply as fast as you can! I changed by boot drive letter in regedit to W from C after backing up regestry editor And when i restarted my pc it shows black screen after that 4 dots appear, i can also see my cursor moving but there is nothing i can do after... My windows is Win 10 (1909) Can i access regedit so i could fix that letter back to c ?? Please help me in anyway

  • @purremocat
    @purremocat2 жыл бұрын

    What if there is no back up of regback and the folder is completely empty?

  • @ZaheerAbbas-zp2hi

    @ZaheerAbbas-zp2hi

    Жыл бұрын

    same here, anyone have the solution please

  • @MBK_2001

    @MBK_2001

    Жыл бұрын

    You can create a Copy using this video kzread.info/dash/bejne/m2Gdp9Czm83aYtI.html.

  • @MBK_2001

    @MBK_2001

    Жыл бұрын

    @@ZaheerAbbas-zp2hi Watch this video for the solution kzread.info/dash/bejne/m2Gdp9Czm83aYtI.html

  • @MBK_2001

    @MBK_2001

    Жыл бұрын

    You can try this video too kzread.info/dash/bejne/dK2f0diGnpjKeKg.html

  • @AAPRO100
    @AAPRO1002 жыл бұрын

    What do I do if the files are 0 please tell me

  • @BA-kl6bv
    @BA-kl6bv2 жыл бұрын

    Hi, my system is corrected and check c dir it’s show notepad recovery only and d dir shows all windows file . Please tell me what do next.

  • @snowman6408
    @snowman64082 жыл бұрын

    I dont have those files in regback what i do now i can see those files in config pls help

  • @RATINGZONE
    @RATINGZONE2 жыл бұрын

    What to do.. If there is Microsoft Version 2004 (OS Build 19041.1)

  • @giovanimixhunter3409
    @giovanimixhunter34092 жыл бұрын

    I don't have a copy of registry backup, is there any possible way to repair my boot?

  • @BA-kl6bv
    @BA-kl6bv2 жыл бұрын

    Hai, My system is corrected now my c diver show only recover note pad and d drive shows all windows file. Please tell me what do next? It’s windows 10.

  • @ronaldbarberan6805
    @ronaldbarberan68052 жыл бұрын

    So, what can I do if I have a new version of Windows??

  • @knarfamoranemix6030
    @knarfamoranemix60302 жыл бұрын

    I got rid of the BSOD with REGISTRY ERROR, but now I get a black screen with a message from the boot manager. The problem now is : "The Boot Configuration Data for your PC is missing or contains errors." I suspect I should not have done rebuildBCD. On the other hand, I can get one step further in reinstalling from DVD or USB stick.

  • @reese8050
    @reese80503 жыл бұрын

    Yo dude, in my RegBack folder, it says it is empty, what’s next? But I have a folder called Backup with stuff in it, I’m not sure if it will help, this what’s inside: BBI BCD-Template components default drivers ELAM sam security software system Each one has KB, Will this help?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    If they created while the system is healthy, the will help you to fix your issue. If you recently backed them after appearance your issue, they can not help you. See the date of their creation to see if they were created before or after the issue.

  • @maouiecardino3852
    @maouiecardino38522 жыл бұрын

    When i tried copying he regback folders. It says file not found

  • @XannuvavyxH
    @XannuvavyxH2 жыл бұрын

    Soo this wont help me? I got the older version.. How can I proceed?

  • @aljon5947
    @aljon59472 жыл бұрын

    It doesnt bluescreen BUT! Its now stuck at black screen with windows logo and loading cirle.

  • @Jebbles1
    @Jebbles13 жыл бұрын

    Well. I don't have any regback files because my version of windows didn't support it being enabled in the first place so this video is deemed useless for everything other than showing me how to see that I can't restore my PC or any of my things on it. Thanks I guess.

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    🙂🙂🙂 Take it easy my friend, so you can get the online help for free. Maybe you got it in that wrong way. However, the video didn't make it close as you guess. If system restore not worked, you can try system reset. If system reset disabled, try to enable it as on this video: kzread.info/dash/bejne/e6Sf0smqoNrHedI.html If system Reset failed, you have to reinstall windows as on this video: kzread.info/dash/bejne/k4ysp86akcyaf7Q.html

  • @StaySilent1
    @StaySilent1 Жыл бұрын

    It says “system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format” How you fix this?

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    If this appears after you have restored the registry files, then make sure their size is not equal to zero.

  • @TitusAshivudhi
    @TitusAshivudhi3 жыл бұрын

    I can't boot into windows, my pc went to safe mode when I switched it on. I followed your other video and got stuck when I type "copy *. *.." I got an error saying "the system cannot find the file specified 0 files copied

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Which one you followed ? If you have renamed the original registry files inside Config folder, revert their names into original names as instructed on the video. If your issue is that your PC went to Safe Mode, execute this command: bcdedit /deletevalue {DEFAULT} safeboot

  • @pritampanchal3609
    @pritampanchal36093 жыл бұрын

    Bro plz solve my problem In pc from where we enable all cores from there i choosed (no gui boot ) After that my windows is not starting I used fix commands also Like Bootrec /fixboot And all other plz help me plz

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Try to enable Graphic driver from BIOS settings if disabled, or try to boot into safe mode then revert that change back.

  • @tarkeshwarvarma2436
    @tarkeshwarvarma24363 жыл бұрын

    One problem I face since 3 months Green tick not show when I update window at a front of setting please make video on it.

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    I will add it to my list of futures videos. Thank you

  • @derrickrozario
    @derrickrozario2 жыл бұрын

    Hi I AM trying to come out of the srt trail reg issue.... When i AM in cmd... Its showing me as backup already exist

  • @derrickrozario

    @derrickrozario

    2 жыл бұрын

    Please let me know How To go forward with the program

  • @thulanihlomuka6228
    @thulanihlomuka62283 жыл бұрын

    After I've REN the Files and try to copy it says the system cannot find the path specified

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Review your command for errors.

  • @dmo-txc
    @dmo-txc2 жыл бұрын

    I don't have any backup what now pls help

  • @distromedia2805
    @distromedia28053 жыл бұрын

    I got no backup of registry files but mine is same windows built as yours. Please give a solution im stuck for days

  • @kenzoalfay

    @kenzoalfay

    3 жыл бұрын

    i have same problem

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What are your error code and error message, so I can help both of you ?

  • @distromedia2805

    @distromedia2805

    3 жыл бұрын

    @@ValiumMediaTech first thank you for the response, the problem began with srttrail.txt error and i followed your video where shows how to fix it with rebuilding BCD and it was successful. But when i continue, there was a new blue screen showing something like registry files are missing or corrupted. Then i tried this and discovered that i got no backup files of registry. Maybe resetting is the only way out of this.

  • @kenzoalfay

    @kenzoalfay

    3 жыл бұрын

    @@ValiumMediaTech it shown error code d0000452

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    ​@@distromedia2805 1- Boot into recovery Environment, open CMD and execute the following commands: SFC /SCANNOW DISM /IMAGE:C:\ /CLEANUP-IMAGE /RESTOREHEALTH (Replace the C: with the letter of your windows partition) Restart the computer and see if the issue has been fixed or not. If not fixed, tell me the last changes you have made to your computer before appearance of your issue (for example, hardware upgrade, installing or updating drivers, updating).

  • @tarkeshwarvarma2436
    @tarkeshwarvarma24363 жыл бұрын

    Brother,if I format pc totally then registry back to( default )yes or no?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    If you mean if the system reset or system restore will restore Registry to in config to default, the answer is Yes for system reset, but system restore will replace the current registry with the backup copy from restore point that you will select. Also if you have an old restore point to a date that you were have a full backup copy of registry in the regback folder, then restoring to that restore point will bring you that copy of registry in the Regback folder But formating your disk will delete everything.

  • @ghostrider7675
    @ghostrider76753 жыл бұрын

    First I got this stop code 0xc000021a After that I tried everything. And my regback folder has zero files. Srttrail.txt shows Startup repair has tried several times but still cannot determine the cause of problem.Can you help please?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Watch this video: kzread.info/dash/bejne/Y4d-1Jeag6epdZs.html

  • @vvkthkr5447
    @vvkthkr54473 жыл бұрын

    Bro whenever iam typing any command to rename the registry hive files in the config folder it's showing access denied, pls help New update - now it's showing the process cannot access the file because it is being used by another process

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    1- You can't rename registry files from running windows. 2- If you have more than one account, select one with administrator access. 3- If rename failed using commands, rename the registry files manually.

  • @vvkthkr5447

    @vvkthkr5447

    3 жыл бұрын

    @@ValiumMediaTech even when doing manually same error is showing, there is a lock sign on the files inside regback folder, iam trying to open copy edit but same error again and again, pls help

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@vvkthkr5447 - If you have more than one account, make sure to use one with admin access. - Try to remove editing protection of the registry files using this command: ATTRIB -S -H -R C:\WINDOWS\SYSTEM32\CONFIG\SAM

  • @vvkthkr5447

    @vvkthkr5447

    3 жыл бұрын

    @@ValiumMediaTech brother I tried every method and command you told me using cmd n manually but still it shows : process cannot access the file because it is being used by another process.. Pls help or my precious data will be lost forever

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@vvkthkr5447 Take a screenshot for the result of command and upload it to paste.pics then post the image link in new comment.

  • @LoopGamerZz
    @LoopGamerZz2 жыл бұрын

    Bro I change my registry .exe value (exefile) to (application) 🤦🏻 and I can't open anything in my pc i can't open registry editor , cmd please help me !

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    Boot from a bootable USB and change their name back to previous names and extensions. Watch this video to see how to create a bootable USB using your mobile: kzread.info/dash/bejne/Zp-O17d9nJrWfKQ.html

  • @kannya168
    @kannya1688 ай бұрын

    Wow Amazing!

  • @ValiumMediaTech

    @ValiumMediaTech

    8 ай бұрын

    Glad you think so! Don't forget to subscribe! ❤

  • @LoverIGL07
    @LoverIGL072 жыл бұрын

    Mate How can I solve inaccessible boot device?

  • @BgmiMhakaalgaming
    @BgmiMhakaalgaming3 жыл бұрын

    Can you please type code that is used in next step

  • @jetrixjose8450
    @jetrixjose84503 жыл бұрын

    Sir what should i do with the other files i've rename .old. should i delete it?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    If you are able to boot normally after restoring files from REGBACK folder, then you can delete them.

  • @timtamoti
    @timtamoti3 жыл бұрын

    my regback folder is empty... what to do with that? is there a fix ?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is the error code or error message that you are trying to fix ?

  • @timtamoti

    @timtamoti

    3 жыл бұрын

    @@ValiumMediaTech windows is not booting... i did chkdsk it says that "windows 10 doesnot boot. 'Windows is not recognized as an internat or external command, operable program or batch file. Do you know what to do with it?

  • @etkarortz2963

    @etkarortz2963

    2 жыл бұрын

    Same thing, my code error is critical process died. There's no files inside the regback folder.

  • @EpisodeAnon27
    @EpisodeAnon272 жыл бұрын

    Do you know how to fix the blue screen with stopcode 0xc000218? I'm stuck with the green screen this entire time, it just keeps on restarting :(

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    Watch this video: kzread.info/dash/bejne/Y4d-1Jeag6epdZs.html

  • @EpisodeAnon27

    @EpisodeAnon27

    2 жыл бұрын

    @@ValiumMediaTech Thank you! T_T

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    You areWelcome 👍

  • @mbonelimbiko4324
    @mbonelimbiko43243 жыл бұрын

    I have already renamed my folder early on config folder but when I copy the to C:\windows \System32\config\RegBack\SAM I am getting this error "the system cannot find the file" I really need to solve because tomorrow I am writing a test

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    That means you don't have a registry backup, and you should revert names back to original names.

  • @mbonelimbiko4324

    @mbonelimbiko4324

    3 жыл бұрын

    @@ValiumMediaTech how to I revert the names

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    ​@@mbonelimbiko4324 Tell me which files did you renamed and what are the new names and I will tell you how to revert their names back.

  • @mbonelimbiko4324

    @mbonelimbiko4324

    3 жыл бұрын

    @@ValiumMediaTech Default to Default1 SAM to SAM1 SECURITY TO SECURITY1 SOFTWARE TO SOFTWARE1

  • @mbonelimbiko4324

    @mbonelimbiko4324

    3 жыл бұрын

    @@ValiumMediaTech all the error massage on the blue screen "c:windows\system32\logfile\sirtai\sir tail. txt"

  • @talalh7247
    @talalh72472 жыл бұрын

    Please tell me sir can I have all my data back after this :(

  • @yashodapyakurel797
    @yashodapyakurel7973 жыл бұрын

    BRO MY NETWORK OPTION IS NOT SHOWING AND WHEN I SEARCH NETWRK AND INTERNET IT AUTOMATICALLY CLOSES I THINK ITS BECAUSE I DELETE SOME UN KNOWN KEY CAN YOU PLZ HELP ME BY PROVIDING YOUR REGEDIT FILE BY EXPORTING PLZZZZZZZZ HELP ME PLZZZ

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    - You can't use another registry data rather than yours. - If you have a registry backup, you can restore them as instructed on the video. - If you are know what is the missing file, I can instruct you how to replace it. - If you have a valid restore point, it can help you fixing your issue.

  • @fizzgamezop5019
    @fizzgamezop50192 жыл бұрын

    In my pc the regback have no file its empty now how i can restore plz help me in this

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    What is your issue that you are trying to fix? You can watch this video: kzread.info/dash/bejne/Y4d-1Jeag6epdZs.html

  • @fizzgamezop5019

    @fizzgamezop5019

    2 жыл бұрын

    @@ValiumMediaTech my pc is not booting up its showing that automatic repair faild and when i tried to copy regbackup files just you did in the video but in my case there are zero files and when i still type use this (copy*.*..) it says could not copy your file Any solution for this ?

  • @benishsiva554
    @benishsiva5543 жыл бұрын

    Bro in my regback folder have zero files how to fix the issue

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is your error message or error code that you need to fix ?

  • @keivenmangin8096
    @keivenmangin80963 жыл бұрын

    Sir the preparing automatic repair is not showing it will show Your pc couldn't start properly multiple tries ect and then error code 0xc0000001.. when i press the enter process is still the same. How to fix this one. i need my laptop for my online class. please notice my comment

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    If there is no another error message appear on the blue screen to tell you the exact problem, read the srtTrail.txt file by executing the following command and tell me the cause of your problem: Notepad C:\windows\system32\logfiles\Srt\SrtTrail.txt

  • @keivenmangin8096

    @keivenmangin8096

    3 жыл бұрын

    @@ValiumMediaTech I cannot open the cmd because the error code 0xc0000001 is showing

  • @keivenmangin8096

    @keivenmangin8096

    3 жыл бұрын

    @@ValiumMediaTech SIr ca i install windows 10 using usb?

  • @jnanashetty783
    @jnanashetty7833 жыл бұрын

    What if we have all regback files equal to zero?? Please any reference

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Don't restore them if they are equal zero.

  • @jnanashetty783

    @jnanashetty783

    3 жыл бұрын

    Then how to solve the issue?

  • @jnanashetty783

    @jnanashetty783

    3 жыл бұрын

    I'm still facing the issue.. Because registry is zero.. I can't proceed forward.. Then how solve this issue.. Any idea.. I didn't create recovery point manually also.. So neither I can do that

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@jnanashetty783 What is your blue screen error?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@jnanashetty783 Take a photo for the blue or the black screen that you are trying to fix, then upload the image to drive.google.com and add the link in a new comment.

  • @abhinavgupta9061
    @abhinavgupta90612 жыл бұрын

    What to do when registry backup file is not available windows version 2004

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    What is your error message?

  • @GarrytheSnailtrail
    @GarrytheSnailtrail Жыл бұрын

    What do I do if there isn’t anything in the RegBack folder

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    See other suggestions, or watch this video to see how to replace the Registry files: kzread.info/dash/bejne/dHma1ryepqqxk9o.html

  • @krishgupta5409
    @krishgupta54093 жыл бұрын

    cmd is not detecting hard drive partions I saw in notepad there are no partitions

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Execute the following commands to see if your disk and partitions are available but without assigned letters: DISKPART LIST DISK LIST VOL If the disk is shown,, that means the disk is either has no valid format or the partitions has no assigned letters. If your disk is not shown, that means the disk is either corrupted or is not connected firmly to it's socket on motherboard.

  • @noteandtone6521
    @noteandtone65213 жыл бұрын

    bro im having a 19mb system file can i replace it

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    I think that is not enough size for all system sizes in windows 10. So you have too take a backup copy for old registry files in config folder before copying the backup copy from regback folder.

  • @ixd22lathesh29
    @ixd22lathesh293 жыл бұрын

    K is it OK to replace another files

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Don't replace files in Config folder, because you will go into severe problem if the new files are corrupted.

  • @ixd22lathesh29

    @ixd22lathesh29

    3 жыл бұрын

    @@ValiumMediaTech oh then I replaced it 😭 and I'm getting the circle of dots and it takes long time to boot

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@ixd22lathesh29 Did your issue fixed or not?

  • @vishalkumar331
    @vishalkumar3313 жыл бұрын

    dude my regback folder is empty do i need a bootable usb?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is the error message that you are trying to fix?

  • @vishalkumar331

    @vishalkumar331

    3 жыл бұрын

    @@ValiumMediaTech problem solved bro thanks anyways.

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@vishalkumar331 Thanks for your answer.

  • @jnanashetty783

    @jnanashetty783

    3 жыл бұрын

    How did you solve that issue of empty files?

  • @vishalkumar331

    @vishalkumar331

    3 жыл бұрын

    @@jnanashetty783 bro make a bootable usb and reinstall windows dont worry nothing will be deleted

  • @Gusty.
    @Gusty.2 жыл бұрын

    How do you fix if you have no regback folder?

  • @batmantkay9827

    @batmantkay9827

    2 жыл бұрын

    Yeah I have the same problem I need help plz

  • @exoticexpense5289

    @exoticexpense5289

    2 жыл бұрын

    did you find a way

  • @Gusty.

    @Gusty.

    2 жыл бұрын

    @@exoticexpense5289 no i just bought a new harddrive

  • @exoticexpense5289

    @exoticexpense5289

    2 жыл бұрын

    @@Gusty. was planning on that at least I know that should work cheers

  • @playingwithparker3763

    @playingwithparker3763

    2 жыл бұрын

    That’s the trick. You don’t. >:)

  • @snypedapiper5087
    @snypedapiper50872 жыл бұрын

    Nice but video is very fast... Next time take your time pls for us to follow your steps

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    Sorry for that

  • @_HarshSahu
    @_HarshSahu3 жыл бұрын

    I was not able to do any of these. It didn't work. There were 0 files and I am stuck. Please help me.

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is your error message or error code that appears in the blue screen?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    kzread.info/dash/bejne/Y4d-1Jeag6epdZs.html

  • @_HarshSahu

    @_HarshSahu

    3 жыл бұрын

    @@ValiumMediaTech the message is of recovery on the blue screen

  • @_HarshSahu

    @_HarshSahu

    3 жыл бұрын

    @@ValiumMediaTech it was coming after I deleted a file in registry edit

  • @_HarshSahu

    @_HarshSahu

    3 жыл бұрын

    @@ValiumMediaTech this was that video from which I deleted the registry edit file kzread.info/dash/bejne/oXyHlKqvf9LHosY.html Please reply me as fast as you can.

  • @BgmiMhakaalgaming
    @BgmiMhakaalgaming3 жыл бұрын

    I completed to 4 files , 1 dir 1 but not what what the next step

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    Read your comment and then tell me what is that.

  • @cowabungaGGWP
    @cowabungaGGWP3 жыл бұрын

    My version is bigger than 1800 so how to solve ?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    It seems you didn't watched the video to the end. See if there are a registry files in REGBACK folder or not.

  • @cowabungaGGWP

    @cowabungaGGWP

    3 жыл бұрын

    @@ValiumMediaTech It shows 0 file

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@cowabungaGGWP So, you have to try another method to fix your issue. What is your error code ? This video may help you: kzread.info/dash/bejne/a4uulsahYaWbj7Q.html

  • @peterawilliams
    @peterawilliams2 жыл бұрын

    the problem is that you talk to fast and a little music behind can that not other

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    Sorry for that. If you need help in any step, add your question.

  • @kirylj5589
    @kirylj55893 жыл бұрын

    My error is bad system config info would this help?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    If you have a valid registry backup in Regback, the answer is YES.

  • @kirylj5589

    @kirylj5589

    3 жыл бұрын

    @@ValiumMediaTech how would I know if I have a valid regback?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@kirylj5589 See if you have a registry files in the Regback folder that are not 0 in sizes, then it's a valid registry backup.

  • @kirylj5589

    @kirylj5589

    3 жыл бұрын

    It says I don’t have enough storage to do the last step before continuing to windows can this be fixed ?

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@kirylj5589 If you have enough free disk space, so that is because you didn't rename the Registry files in Config folder.

  • @ToxicityFreaky
    @ToxicityFreaky Жыл бұрын

    My regback folder is empty…

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    So Restoring Registry method is not applicable to your system. What is your blue screen error message and error code that you are trying to fix?

  • @abaabbabbaababba1416
    @abaabbabbaababba14163 жыл бұрын

    cannot enter wre mode

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    You have to create a bootable USB then boot from it in order to fix your problem.

  • @hydrfgaming532
    @hydrfgaming532 Жыл бұрын

    I got azurite optimizer and then my pc get virus how to fix it I saw almost thousand videos but it no helpful can you help me?

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    What is your problem right now?

  • @ishimweallan4371
    @ishimweallan43712 жыл бұрын

    Bro should we do everything in the vid

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    No

  • @jackyboy5642
    @jackyboy564211 ай бұрын

    So if i use windows 11 is cant😢???

  • @ValiumMediaTech

    @ValiumMediaTech

    11 ай бұрын

    If you mean applying the method on windows 11, the answer is you can do that.

  • @jackyboy5642

    @jackyboy5642

    11 ай бұрын

    @@ValiumMediaTech i failed boot cant copy, then my lapton cannot go safe mode i think its hardware probs?

  • @ValiumMediaTech

    @ValiumMediaTech

    11 ай бұрын

    Maybe. You can upload the dump file and I will analyze it for you *if you want* . kzread.info/dash/bejne/l6lnvM9rgby2ebg.html

  • @avinjason7032
    @avinjason70323 жыл бұрын

    All files in confing folder has zero size, help me please

  • @siddharth0923

    @siddharth0923

    3 жыл бұрын

    Mine also :(

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is your error code or error message ?

  • @siddharth0923

    @siddharth0923

    3 жыл бұрын

    @@ValiumMediaTech that only inaccessible boot one I don't have even backup in regback + when. I try to do keep my files n restart it is saying it can't be done It is like I can't do anything 😭

  • @avinjason7032

    @avinjason7032

    3 жыл бұрын

    @@ValiumMediaTech error code (0x80073712)

  • @abaabbabbaababba1416
    @abaabbabbaababba14163 жыл бұрын

    no use

  • @BgmiMhakaalgaming
    @BgmiMhakaalgaming3 жыл бұрын

    Sir please help me

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    What is your problem ?

  • @BgmiMhakaalgaming

    @BgmiMhakaalgaming

    3 жыл бұрын

    @@ValiumMediaTech sir when iam copying my files it's showing file not found

  • @BgmiMhakaalgaming

    @BgmiMhakaalgaming

    3 жыл бұрын

    @@ValiumMediaTech but when I am enter list disk & exit then disk name it's showing files & dir

  • @BgmiMhakaalgaming

    @BgmiMhakaalgaming

    3 жыл бұрын

    Any other option to restore this

  • @ValiumMediaTech

    @ValiumMediaTech

    3 жыл бұрын

    @@BgmiMhakaalgaming 1- If you mean the manual copy of registry files from RegBack folder to CONFIG folder, then try to copy them using CMD command as instructed on the video or vis versa. But before copying them, make sure to take a backup copy for the Registry files in CONFIG folder. 2- Review your command for typing errors. 3- Existence of REGBACK folder, doesn't mean that you have registry backup.

  • @fizzgamezop5019
    @fizzgamezop50192 жыл бұрын

    Its urgent bro help me olz

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    How can I help you ?

  • @Venkatakrishna123
    @Venkatakrishna1232 жыл бұрын

    Data losing

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    No

  • @Venkatakrishna123

    @Venkatakrishna123

    2 жыл бұрын

    @@ValiumMediaTech thank you so much ❤️💕

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    @@Venkatakrishna123 You are welcome 🙂💞

  • @craziiaaron2x
    @craziiaaron2x2 жыл бұрын

    Bruh this shit dont work i dont understand how it does for yall

  • @watermenlon3617
    @watermenlon36172 жыл бұрын

    WINDOWS 1803 DOES NOT STORE REGISTRY BACKUP AT REGBACK ANYMORE which is annoying af. the solution that they provided is that you should have a restore point where everything is fine. fu microsoft

  • @ValiumMediaTech

    @ValiumMediaTech

    2 жыл бұрын

    Thanks for your addition.

  • @Unibot47
    @Unibot472 жыл бұрын

    God windows 11 is fucking trash. all of a sudden got an automatic repair loop. regback is apparently not part of win11... apprently the cause of my issue is registry error. I was using my pc, went out to rn a quick errand, came back and everything was broken. Fuckin joke.

  • @jonesmukelabai8080
    @jonesmukelabai8080 Жыл бұрын

    The problem am facing is showing, Stopcode 0xc000021a My regback directory is empty, any solutions? drive.google.com/file/d/1yd49HNh1oMHtW8j4khmPmE9R8QQ54NdD/view?usp=drivesdk

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    Watch this video: kzread.info/dash/bejne/eoGf05OxoputiaQ.html The link you have shared can't be open, because its privacy settings is not public.

  • @jonesmukelabai8080

    @jonesmukelabai8080

    Жыл бұрын

    @@ValiumMediaTech The video is not clearly stating what I should do in the case that my regback is empty. Unlike when the files are there and only need to be copied. How do I go about restoring an empty Regback ??

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    ​@@jonesmukelabai8080 If the RegBack folder is empty, then try another recovery method to fix your issue, such as System Restore or another method.

  • @felixallan2621

    @felixallan2621

    Жыл бұрын

    Hi, notepad doesn't show any drives at all. What do I do?

  • @ValiumMediaTech

    @ValiumMediaTech

    Жыл бұрын

    @@felixallan2621 What about DISKPART, LIST DISK and LIST VOL commands?