How to Reseal Your CAV Injection Pump Part1 (From an International Harvester B414)

Тәжірибелік нұсқаулар және стиль

This video is part 1 of stripping a CAV injection pump to reseal it.
Hello, I'm Lance (aka Bundy Bear), and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advice to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our website available to us and in our store. If you don't see what you would like please email info@queenslandtractorspares.com.au or call 1300 850 097 and we will help where we can.
I do try and help with technical advice at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
The CAV manual is in the technical section of the Queensland Tractor Spares website above.
#bundybearsshed, #tractorrestoration, #tractorrepair, #tractorvideos #crcindustriesau #sparex

Пікірлер: 23

  • @hansrose7404
    @hansrose74046 күн бұрын

    Lance, 5 years ago I followed you resealing another CAV and was able to get my JD 5300 back in service. My issue was the pump head had seized and sheared off the rotor. It took me a while to find a new pump head, but was then able to get it back together and working ..It runs great and I wanted to send my thanks! Regards from Pennsylvania!

  • @BundyBearsShed

    @BundyBearsShed

    2 күн бұрын

    Thankyou, That is good news.

  • @manfromthemist1958
    @manfromthemist1958Ай бұрын

    G Day Lance, just the job, just getting home from Aberdeen after visitng Marshall for a week and needed something to chill down to, traffic was crap and I see you've got a new video out, bottle of wine and Lance nothing could be better. cheers many thanks Barry

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    G Day Barry, Im with you on that, a sip of red and a bit of KZread is very calming.

  • @markwright6230
    @markwright6230Ай бұрын

    Very informative video Great job Lance.. Thankyou for making your videos very easy and understandable for the lay person....

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    Glad you enjoyed it

  • @kentseymour2084
    @kentseymour2084Ай бұрын

    It's been 50 years since I have taken an injector pump apart. Loaned a friend my book on doing this and never got it back. My 285 MF started getting fuel into the sump. Changed the lift pump and still leaking. Dealer was to busy to do it so I have taken it off. Going to a shop for repair. I know it will cost but know it will be checked out. Thumbs up Lance

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    I did a thorough video on the pumps in the MF135 6 speed playlist, videos 14 and 15 that might help you out.

  • @peterjubb5395
    @peterjubb5395Ай бұрын

    What a talented mechanic ( technician) you are Lance. I completely dismantled the CAV. DPA Injection pump on my old MF 30 (French horror horror) Tractor and rebuilt it with a kit from Queensland Tractor Spares. I followed the instructions from your MF video No. 14 & 15. I found it so easy to do although I did at times have a few nervous moments. In particular when the governor weighs fell out of the basket. I did think “What a bastard.” But I got them back, bleed the system and away it went. I must admit I was relieved when fired up. Thanks to your instruction I saved myself a lot of money.

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    That is good news, that is half the reason I do the videos. When Im parked up it will be too late to ask me.

  • @charleshart6992
    @charleshart6992Ай бұрын

    Excellent video Lance - you always make understanding the process relatively easy!

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    Thanks Charles.

  • @pm270100
    @pm270100Ай бұрын

    good vid well done but i got an old TEF ////PS how hard is hard as 🤔🤔🤔🤔😁

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    I have a video on the old TEF pumps somewhere in the bowells of KZread.

  • @jefftheaussie2225
    @jefftheaussie2225Ай бұрын

    Lance, We have a Massey 1105 with the turbo 354. The pump has a pulsation damper on the front of it which is letting fuel out of the equalisation hole in the front of the damper and making a big mess. From my internet research it appears there are two different ones depending on the pump serial number. I will get that number later. Does QLD Tractor spares have these dampers and is there anything I should know about replacing it? Thanking you, Jeff.

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    We may still have them but we sell very few and if we don't have any in stock we could order some I'm sure. Call the 1300 850 097 number.

  • @jefftheaussie2225

    @jefftheaussie2225

    Ай бұрын

    @@BundyBearsShed Thanks Lance.

  • @ulfrogeriversen2123
    @ulfrogeriversen2123Ай бұрын

    Is it the same pump sitting in an 3 cylinder disel, mf 135 1971 model ?

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    Yes but I did 2 videos on the 135 pump in the 135 6 speed playlist videos 14 and 15

  • @ulfrogeriversen2123

    @ulfrogeriversen2123

    Ай бұрын

    Thanks for the answer 🙂. I have 8 speed not an multipower. but maybe it's just the gearbox which is the only difference on the tractors.

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    @@ulfrogeriversen2123 yes the engine is the same

  • @kisaanandtractorhub8811
    @kisaanandtractorhub8811Ай бұрын

    Massey Ferguson 135 new fuel pump price

  • @BundyBearsShed

    @BundyBearsShed

    Ай бұрын

    You will need to email info@queenslandtractorspares.com.au

Келесі