*American viewers* (other English speaking viewers, covert to the metric system): 0. If you have no tension on your clutch, make sure your clutch cable doesn't need to be replaced ($25 repair vs $250). 1. Drain the oil. Might as well do a full oil change. 2. Remove cluch wire from lever (near rear brake). 3. When removing clutch plate, know that clutch may be engaged. So, rotating counterclockwise or pulling upward may disengage clutch. If clutch wire is still connected, you'll have a hard time. 4. Keep disks & metal plates in order when removing, so that you can reinstall them in the same order except with new disks. You can pull the disks out from grabbing them from the slots and pulling them forwards. 5. When replacing clutch with OEM clutch disks, you may have orient the disks so that the side with the "notch" orients upwards, with the final disk being oriented towards the slots that are blocked (you'll see that there's a clear path for disks and a path thats blocked). I got aftermarket disks that had no notch but still changed the orientation of the last disk. 6. Tighten clutch spring bolts to 78 inch pounds. Get a 1/4" torque wrench for $20 to do this accurately. Overtightening will result in the clutch not having the proper clearance to engage and you won't be able to shift gears. 7. Tighten the clutch cover bolts to 109 inch pounds.
@paipesspaipes6712 Жыл бұрын
وعليكم السلام
@mohdhamed4622 жыл бұрын
Nice
@hardy82official
2 жыл бұрын
Thanks bro..
@silverrambo1508 Жыл бұрын
blakontru hiri kiri narokontru yama nya ? Copling namasya ?
@sweetchild32242 жыл бұрын
Dari cara mutar kuncinya udah keliatan nih masternya. Izin subscribe mas
@hardy82official
2 жыл бұрын
Wkwkwk..bisa aja mas Silahkan mas 🙏
@user-en4wk9wo3u Жыл бұрын
What is the clutch cover tightening torque value?
@timothypanfilomaruchan8267
4 ай бұрын
109 inch pounds
@amriwahyudi52162 жыл бұрын
Ijin nyimak om,mudah mudahan bisa dapat motor kayak gitu walaupun dalam mimpi. Hehehe
@hardy82official
2 жыл бұрын
Aamiin...🙏
@aarontete Жыл бұрын
Moja los discos en aceite, los tornillos de los muelles hay que apretarlos a par y el carter lleva su junta de papel o junta de silicona.
@hardy82official
Жыл бұрын
nice...👍
@gerardkinsella60346 ай бұрын
Do you have to drain the oil before changing the clutch plates
@timothypanfilomaruchan8267
4 ай бұрын
Yes, drain the oil... unless you want to make a mess.
@thedailydose30 Жыл бұрын
Hey mate. Hope you are doing well. I think my z900 2023 clutch got burned. I need to replace it with genuine parts.
@hardy82official
Жыл бұрын
I think the sooner the better...
@mot-trance
10 ай бұрын
2023 and you burn your clutch !!?? seriouseley !??! Always 2mm clearance on clutch line !!!
@hardy82official
9 ай бұрын
The habit of the clutch burning quickly is due to the clutch strap setting being too tight, and in some cases this occurs due to the clutch strap being dirty and dry so that the clutch strap movement is disturbed and heavy.
Пікірлер: 28
*American viewers* (other English speaking viewers, covert to the metric system): 0. If you have no tension on your clutch, make sure your clutch cable doesn't need to be replaced ($25 repair vs $250). 1. Drain the oil. Might as well do a full oil change. 2. Remove cluch wire from lever (near rear brake). 3. When removing clutch plate, know that clutch may be engaged. So, rotating counterclockwise or pulling upward may disengage clutch. If clutch wire is still connected, you'll have a hard time. 4. Keep disks & metal plates in order when removing, so that you can reinstall them in the same order except with new disks. You can pull the disks out from grabbing them from the slots and pulling them forwards. 5. When replacing clutch with OEM clutch disks, you may have orient the disks so that the side with the "notch" orients upwards, with the final disk being oriented towards the slots that are blocked (you'll see that there's a clear path for disks and a path thats blocked). I got aftermarket disks that had no notch but still changed the orientation of the last disk. 6. Tighten clutch spring bolts to 78 inch pounds. Get a 1/4" torque wrench for $20 to do this accurately. Overtightening will result in the clutch not having the proper clearance to engage and you won't be able to shift gears. 7. Tighten the clutch cover bolts to 109 inch pounds.
وعليكم السلام
Nice
@hardy82official
2 жыл бұрын
Thanks bro..
blakontru hiri kiri narokontru yama nya ? Copling namasya ?
Dari cara mutar kuncinya udah keliatan nih masternya. Izin subscribe mas
@hardy82official
2 жыл бұрын
Wkwkwk..bisa aja mas Silahkan mas 🙏
What is the clutch cover tightening torque value?
@timothypanfilomaruchan8267
4 ай бұрын
109 inch pounds
Ijin nyimak om,mudah mudahan bisa dapat motor kayak gitu walaupun dalam mimpi. Hehehe
@hardy82official
2 жыл бұрын
Aamiin...🙏
Moja los discos en aceite, los tornillos de los muelles hay que apretarlos a par y el carter lleva su junta de papel o junta de silicona.
@hardy82official
Жыл бұрын
nice...👍
Do you have to drain the oil before changing the clutch plates
@timothypanfilomaruchan8267
4 ай бұрын
Yes, drain the oil... unless you want to make a mess.
Hey mate. Hope you are doing well. I think my z900 2023 clutch got burned. I need to replace it with genuine parts.
@hardy82official
Жыл бұрын
I think the sooner the better...
@mot-trance
10 ай бұрын
2023 and you burn your clutch !!?? seriouseley !??! Always 2mm clearance on clutch line !!!
@hardy82official
9 ай бұрын
The habit of the clutch burning quickly is due to the clutch strap setting being too tight, and in some cases this occurs due to the clutch strap being dirty and dry so that the clutch strap movement is disturbed and heavy.
How much did it cost?
@hardy82official
Жыл бұрын
about 2.5 million 
Do you have a brocks springs ?
@hardy82official
6 ай бұрын
no
Berapa ongkos clutch plate
@hardy82official
2 жыл бұрын
2,2jt harga kampas+plat
nyimak yo bang
@hardy82official
2 жыл бұрын
Siap... Jgn lupa ngopi 😁