√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@Laughlin007

2 жыл бұрын

I would only add that you should make sure the window is in the track before you button it up. If it isn't, put the window all the way down and loosen the 10 mm bolt at the lower right. You can then finesse the window back into the track.

Dear friend, I THANK YOU FOR THIS HELPFUL VIDEO. I replaced my front driver side window regulator just by watching your video, it was great help. I live in St.John's Newfoundland and the weather is terrible as its gusty winds and snow fall, I took my vehicle to a friend's shed and changed it, it saved me at least $70 for which I thank you. The window regulator that I got locally is made in Taiwan $180 not that good, where as the one from Honda was $500, but can not afford it, but is good.

very good video. One suggestion. My window was stuck in the up position. After reading the comments I cut the cable for the regulator. That did not work and was also quite a feat to do. As an alternative you can still remove the two bolts by reaching in the door panel and fishing in a small box wrench. I used one of those flex end ratcheting box wrenches. I knew they would be good for something sooner or later. I am no mechanic but I have taken off a number of door panels for car speaker installation and fooled with all kinds of wiring harnesses. This job is not complex but takes a bit of finesse.

Thanks for checking us out, and also for you order. Have a great day!

Thanks 1A Auto!!! Ordered the replacement regulator/motor assembly and the window now works. My issue was the window was stuck in the up position. Cut the cable and the window would still not budge. After unscrewing the regulator and motor, was able to move the window around inside the door to reach the two window screws with a small 10mm wrench, it was difficult, but not impossible to reach up to unscrew even with the window still relatively in the up position. But once those two window screws were out, could remove regulator/motor and lower/raise window and replace.

Love these videos. Even beginners like me can do these jobs. Cheers

I did it! The video was great, although it took me a lot longer to finish my repair (mainly because my window was stuck in the up position and I had to cut the cable to move the window down. I had to wait until I could get my hands on something that could cut that strong cable. ) The new regulator works perfectly and even though I probably took two or three times as long as a mechanically inclined person to install it, it was well worth the effort. I saved close to $200 over what the dealer was going to charge for the repair. Thanks!

Thanks for this great video with detailed instructions. I’m new with fixing vehicles and having a lot of fun saving money and not going to mechanics anymore. Had this done in little under an hour!

@1AAuto

5 жыл бұрын

+Alicia Neumeyer Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

Good video. Like others, here, I ran into the problem of not being able to get the window down far enough to be able to loosen the bolts that hold it to the old regulator. The video should have covered this problem. Yes, I thought of cutting the cable but could not find a way to get at it. I ended up completely disengaging the old regulator from the door and moving it into a position where I could get my socket wrench (without extension) in through the large hole in the door panel on the left, to be able to undo the two bolts.

great video, thanks. just did my window in a couple hours, and I have absolutely no car repair experience. thanks again. the dealer wanted to charge me $550. So I saved over $475 with your help.

Got this done in about 2.5 hours as a relatively handy person with only very little car experience. My window was stuck up and would not budge even with me pulling the window down while someone depressed the window down button. I was able to get the job done by taping the window in the up position and (with significant difficulty) I was able to use a box wrench to remove the bolts from the regulator - it was so tight I even had to remove my wristwatch. I got the left regulator bolt removed by snaking my wrench up through the large cut out in the bottom left side of the door. I then removed the right bolt by working my wrench down from the top windowsill area and working it into place by guiding the head of the wrench with my left hand which was snaked up through the aforementioned cutout in the door. Thanks again for the great video and best of luck to everybody!

Very clear instructions, and the part from 1aauto fit and worked great. Took me about an hour total. Your time may vary depending on your skills and automotive experience. Thanks, guys!

I am so far from a mechanic and this only took me 40 minutes with these excellent instructions. Saved me hundreds on labor and only cost me $70. Thank you for this video!

@1AAuto

3 жыл бұрын

+mark devlin Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Great help! I would never have tried that if I didn't watch your video first. Honda wanted about $900 total in Vancouver Canada although that was a phone estimate. It took me three hours to go slow and check the video constantly. But I am not a mechanical and thought I gave up repairing my own car about ten years ago. I do follow instructions well and these were good.

@1AAuto

8 жыл бұрын

Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393

my new to me 2005 crv window was stuck down after being left open in a rainstorm. My local mechanic wanted $750 for repair using genuine honda parts. He wouldn't even quote me for aftermarket parts. Charged $220 for diagnostics and putting window up with duct tape. Thank you sooooo much for this video. Took us about 2 hours with another $75 in parts and the window works like a charm!

@1AAuto

5 жыл бұрын

+Valerie Slusarz Thank you for your feedback! We are happy we could help.

Very good instructions! Excellent video! A must watch before replacement window regulator

Great video, teacher. I fumbled around for 2 hours but I installed and reassembled everything. Thanks!

Thanks for watching. Have a great day! 1aauto.com 888-844-3393

Great Video! Replaced the regulator in my '06 Honda Element after watching. Love the editing (speeding up in places with detailed instruction). Thanks for helping me save some money on this project. Took me less than an hour and I'm not a mechanic by any means.

Thank you for a most handy video! Your very detailed video helped me zero in on just tightening the regulator bolts for my 2004 CR-V passenger side window, instead of going too crazy taking apart the whole thing. Thank you SOOOO much for that time saver!

Thank you very much for an excellent video. Hats off to the young man walking us through it. Give him a raise.

THANK YOU!!! I followed each step just as it was done and was able to get everything back in working order. I suppose it helped that it was on the exact same year, make, and model, but the instructions were easy to follow, and worked! Thank you again for making this video. Kind of feel like a hero around here now. :-)

@1AAuto

8 жыл бұрын

+Ray Gering (Anarchit3ect) Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393

Thank you for this video. I was able to change my window regulator with no problem after watching it!

great video, thanks. just did my window in a couple hours, and I have absolutely no car repair experience. thanks again.

I'm doing this this wk end and following this video to the tee Thanks buddy your a star 🌟

Many thanks for the video.....I referred to it several times as I changed my mechanism. Sorry, could not get the part from you as would have taken to long to get to New Zealand. One thing that might be useful for others. Its really hard to get the cable ties back in place. So I snipped them off. Then there is a slot at the bottom of the clip where I could put a new cable tie through and tighten up to similar tension to the old ones. This may stop a few rattles.Once again...thanks...great video.

Outstanding video! You made this process simple through your thorough and easy to understand instructions. Thank you.

@1AAuto

6 жыл бұрын

+Steven T Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

Comprehensive detailed video for removing and installing the window regulator. Worked well for me. No unusual issues to report.

@1AAuto

5 жыл бұрын

+Ted Larason Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA+Comment&GqNoniV2c

just saved me $428 on a repair thanks awesome videos i have learned so many things on how to fix my crv from you guys

Phenomenal instruction! Literally just finished this about a half hour ago. Thank you very much for this!

@1AAuto

4 жыл бұрын

+Edward Kowalski Thanks for checking us out!

Thanks for making this video. Bought the part from your store, installed it. Fixed the problem. Thank you

Many thanks for this. For me it turned out to be a bad connection, but it was your video that helped me get the door panel off in a jiff. When I do need a part I will come to you first.

@1AAuto

7 жыл бұрын

+Bob Albin That's what we like to hear. Glad this video was helpful for you.

y'all are doing god's work. they told me it was going to be 800$ to replace this at the honda service center.

Could not have done this without this video..needed the $$ for Xmas. Thank you very much.

i have to say i love 1a auto i already bought a couple of part from u guys and it all works for my 2003 honda crv u have a customer for life thanks for all the help guys......

@1AAuto

7 жыл бұрын

+krs bronx Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

This video is great! I bought this part and was able to swap it out in a couple of hours. My window was stuck closed so I had to cut the cable to lower it. This window regulator was labeled as made in Taiwan and seems pretty close to OEM, if not better. Thanks 1A Auto!

@1AAuto

3 жыл бұрын

+David Halterman Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

The issue might be related to a pinched wire some place and is ground out the entire window to the frame of the CR-V. Your best bet would be to check for any frayed or pinched wires.

Perfect video. Having this video handy make me confident in doing this job on my wifes CR-V.

@1AAuto

6 жыл бұрын

+Jorge Borges Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA+Comment&GqNoniV2c

Thank you so much, I just fixed my CRV door window regulator by following your steps🙏🏻

@1AAuto

4 жыл бұрын

+Atallah Al Enazi Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

If you fast forward to 44 seconds we explain all of the tools that you should need to perform this repair. 1aauto.com 888-844-3393

Hi and thank you for this video. I do have a question though..my 2003 CRV drivers window is frozen in the upright position and will not go down when the button is pressed. I was told by Honda that the switch is ok, but the regulator needs to be replaced...how do I lower the window to loosen the bolts as you show in the video?

Thank you for your order. Have a great day! 1aauto.com 888-844-3393 FREE SHIPPING in the lower 48 states!

Crystal clear explanation, thanks 1A

I've replaced 4 of these on Accords, but last night, in the cold, and dark was not in the mood to go about it on my crv in the "trial and error mode". My window was stck down so my son and I watched your video while thawing out (we are in Colorado). We then went out and removed the broken regulator on 5 minutes and jammed a 2x4 under the window to hold it up. Came inside and placed an order with tyou for the part. In my case, the cable was frayed and twisted so it wouldn't move much. Thanks

Excellent video. I just followed this to a T and replaced my passenger side motor/regulator on a 2005. Thanks!

@1AAuto

3 жыл бұрын

+Jeffrey W Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Thank you so much for this video! Quality work to get this replace for my Daughter's CRV! Cheers

@1AAuto

5 жыл бұрын

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Carlos R. Garcia

Thanks Mike for this video, and thanks for the parts. Worked like a champ! Appreciate it!

@1AAuto

8 жыл бұрын

+Kevin Yancy Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393

Excellent step-by-step instructions!!!! Thanks!!!!!

@1AAuto

7 жыл бұрын

+Antonio Johnson Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA+Comment&GqNoniV2c

We currently do not have one for that particular year.

Great video followed your video step by step and wow it was amazingly smooth sailing

@1AAuto

4 жыл бұрын

+Francisco Garcia Thank you! We love empowering our viewers and showing how to perform DIY auto repairs!

Great helpful Video. Thanks for taking the time to put this together.

@1AAuto

8 жыл бұрын

+Topher Law Thanks for watching! If any of our viewers need to replace their window regulator, we carry the one shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the lower 48 states. www.1aauto.com/2002-06-honda-cr-v-window-regulator-front-pair/i/1awrk00353?KZread&CTA%20Comment&ATony

Great video --- thanks much for putting it up. Also, I know it would be a few extra steps, but would removing the speaker help in gaining access to removing/installing the unit?

Thanks, I wish a purchased from you - bc of the guidance, I found your video after I got my regulator. Sorry & thanks

@1AAuto

9 жыл бұрын

Keep us in mind for next time! Glad we could help and thanks for watching 1aauto.com 866-403-3393

I thank you for quick reply and you are doing great jobs here.

Just finished mine.great video.thx

You would need to replace the motor and regulator as a complete assembly on this vehicle. We carry new regulators with the motor on our website 1aauto.com 888-844-3393

Just purchased for my 2005 CRV driver side. I'm an quite mechanically inclined, but I hate working on cars. Didn't want to spend $200 plus and waste a whole day having to look for someone to do it. Basically I watched the video, bought the part ( great price )on a Sunday and installed it on Wednesday! unbelievable how easy it was and finished in 1-1/2hrs. just alittle patience getting off the electrical connectors and clips, besides that you GUYS AT 1Aauto .com ROCK!!!!!!!

@1AAuto

9 жыл бұрын

Thank you for watching. Glad we could be of help. 1aauto.com 888-844-3393

@capchi3

9 жыл бұрын

1A Auto Parts Everything went well, finished and happy. Just one thing, my "auto" function on the power window did not work, I believe there a code to activate that function again. Other than that, much appreciated on all your service and video!

They could be. You could try to spray all of the weatherstrip around the windows with a little silicone spray. You can this at your local auto parts store. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393

Mine was stuck up also. I removed the 4 track bolts and the 3 motor screws then pushed the bottom of the track forward, towards the hinges, and was able to get the window low enough to get the two bolts out with the ratchet and 10mm socket.

There's only one window regulator in your door. In the video we're showing the old and the new window regulator and explain that you need to transfer the bolts from the old window regulator to your new one.

You may want to check to see if any of the electrical connections in the door need to be dried out.

Thanks for the great video! How can I tell if the problem is with the switch or the regulator? My driver's window is unresponsive. There is no sound at all when I press the window switch. All the other windows work from the driver's master switch panel, just not the driver's window. Can you advise which leads to test for continuity on the master switch panel and on the window regulator connectors? Just want to make sure I'm fixing the right component. Thanks! Jeff

You may be able to apply some of the basic steps that need to be taken and apply them to your vehicle. The correct part number for the drivers side window frint regulator on your 2007 Honda CR-V is Part Number: 1AWRG01056 1aauto.com 888-844-3393

You may want to take the door panel off an see if you can physically see anything going on with the window regulator. You could also check the power going to the window motor from the switch with a test light. We carry a new drivers side window regulator with the motor for a 2002 Honda CR-V with FREE SHIPPING on our website 1aauto.com Part Number: 1AWRG00409 1aauto.com 888-844-3393

This was very helpful! Thank you so much!

@1AAuto

4 жыл бұрын

+The Love Pirate Thanks for checking us out! 1AAuto.com

Cool beans thanks for this tutorial. This looks pretty easy to do now I can go and do my own.

@1AAuto

9 жыл бұрын

Thank you for watching! 888-844-3393

Thank you post 1A auto really does help 🤙🏽 God bless you man from Guam be safe

@1AAuto

3 жыл бұрын

+671Guam Never mind road Thanks for checking us out and the support! 1AAuto.com

@671guamnevermindroad9

3 жыл бұрын

@@1AAuto always do it saves so much on labor 😊😊

I found a heat gun is great to loosen the sticky stuff to get the plastic to remove and then stick back in place. Just don't get it too hot.

Great video, thanks!

We are currently doing videos on other vehicles but we can keep this in mind for one later on.

@markqualec

6 жыл бұрын

1A Auto Parts Thanks for making the video but you need a camera man because i cant see how you got those clips out.

@1AAuto

4 жыл бұрын

+Yah’s Chosen Thanks for the feedback!

Super helpful! Thank you so much!

@1AAuto

7 жыл бұрын

+Daniel Clark Our pleasure! For anyone else needing to make the repair, you can find the window regulators here: www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA%20Comment&ATony

Thanks for posting this helpful video. The driver-side window on my 2001 CRV is stuck in the closed position. Incoming voltage on the plug to the regulator motor tested fine. But when I applied 12 volts from the battery directly to the wire attached to motor, nothing happened. So appears I need a new motor and regulator. But how do I get the glass down to remove the 2 mounting bolts that secures the glass to the regulator. I have the panel off, but can't budge the glass manually.

They're not any specific brand, they are made well. 1aauto.com 888-844-3393

Great video! 💪👍🏼

Hi Chad, I'm not sure which one you need. You can visit our website at 1aauto.com we may have one listed for your vehicle. 1aauto.com 888-844-3393

thank you, I have a 2003 CR-V and my drivers side window got wet when I left is down at lunch and ah yeah, it rained!!! It went back up but it kept fogging up so I rolled it down and down it stayed. It doesn't make a noise!!. All the other windows work and the door lock works! Is this going to be the same problems seen in the video, and I need to get a replacement window regulator???

Hey, video looks good. Any chance you guys have another how-to for a 2001 CRV, front driver side window. I've noticed the door panels are different from the later models.

Thanks it helped me

On your site you offer this regulator. My main question is what brand is it?

At the 14:52 Mark, you moved that bar slightly upwards to give room to get the regulator out. I did likewise but the left side popped free. Do you have an idea what that connects to so I can pop it back in? Not the end that connects to the door handle but the other end. Video?

I am currently fixing my 2004 Honda CR-V. This video is perfect tool for learning to do this. I do have one/two questions. Did you grease the regulator before installing? What kind of grease do you recommend?

@1AAuto

7 жыл бұрын

+7froggy2 LOL gameplays The window regulators that we sell come pre-greased. Here's a link to them on our website if yours is bad and you would like to take a look at the ones that we carry. We also offer free shipping on all orders in the US www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA%20Comment&ATony

thks your video greats..

I just bought the window motor regulator in your website. is there any difference to do in a CRV 1998 ?

Super, thank you.

Thank you for your order, it may be a similar procedure to the one shown in the video. Hope this helps you out. 1aauto.com 888-844-3393

Very competent. Impressive video. The driver side window on our 2005 Honda CRV will not lower. The other windows are unaffected. I don't know if that indicates a bad connection, bad switch or regulator problem. I plan on opening the door panel tomorrow to find out. If it is the regulator, I'll order it through you. How long will it take to deliver?

@1AAuto

10 жыл бұрын

Most orders reach their destination within 3-5 business days depending on where it's getting shipped to. If you call our sales staff they can give you a better idea. 1aauto com 888-844-3393

It takes very long for my window to roll up and it's so close to dying as you can really hear the motor trying to turn over. I took my panel off, so now I'm ready to put the regulator and motor in. Can you tell me what model I need for a 2000 honda CRV.

Does the water shield need new adhesive or it can just be reapplied with no problem?

Hi. The experts say that if the regulator has gone (my problem is driver's side 2002 CRV), there will be a grinding noise, or will be able to move the window by hand. However, my window just stopped working and, if I try the switch, there is no noise and the window doesn't move. The other windows work from the master panel. In your expert opinion, could this be the regulator, or something easier? It's not the fuse, as I've checked. Great video by the way. Thank you.

A Quick question: does that part include the circuit board having code PWSS5A? Sorry I do not nothing about auto parts and my father’s circuit board has broken. Thanks

THANK YOU!!!!

@1AAuto

6 жыл бұрын

+S.N. L Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Honda/CRV/1AWRK00353?KZread&CTA+Comment&GqNoniV2c

He said popping and grinding sounds and I was damn sure it was the window regulator and it still didn't work so, now I know it's the switch... god I hope this works because it's hurricane season and all the rain is not cool when your damn windows won't go up and the driver side window go down by itself... 😆💀🙄😭

Trying to get this swapped in, window is stuck in the up position, cannot pull it down manually to remove the two bolts in the track, any other suggestions?

@1AAuto

10 жыл бұрын

Thanks for watching. You can cut the cable for the regulator. That will allow the regulator to go up and down. 1aauto.com 888-844-3393

Just a comment on the technical side - do you need to add grease to the part as I noticed the Honda regulator I took out has a good deal of grease on it???. Also - when you put in and take out the 2 longer bolts that connect to the window connector - the bolts most likely will not line up with the bolt holes (as it did in your video). It may be necessary to reconnect the window power putton and manually raise/lower the track holding the window so the bolt holes line up with the 2 bolts.

@1AAuto

10 жыл бұрын

Good tip John that is correct unfortunately it is not always as easy to line the bolts up as it was in this video, sometimes you do need to raise or lower the track to get at the bolts. And as far as adding grease is concerned, you dont have to. The regulators are ready for install however if you wanted to add a little grease in the tracks it isn't going to hurt anything. 1aauto.com 888-844-3393

I have a question and I kind of want to know what could be the issue before I send it to a mechanic. My passenger side window goes down slowly and goes up slower, as I try to hit the switch to make it go up, my engine seems to want to stall off, I can hear the difference in the engine as if the engine's idle speed is slowing down. I'm guessing it's a short in the switch and I need a new window motor but I don't know I'm not a mechanic, yet. Thanks for your help.

Where can i get the replacement screws for the inner door panel on the passenger side of the 2004 honda crv

The window still seems to go down/up slowly in your video. All four of the windows in my CRV are very slow and I would like to remedy that. Are the window channels at fault here?

What tools are needed?

Question, what if you just want to replace the motor, how do you separate the motor from the regulator? I was told by Honda that is what is wrong with it

can u do a 2003-07 accord coupe window regulator plz!!!