How to Replace Valve Cover Gasket on a BMW N20 4 Cylinder (BMW X1 2011-2015 DIY E84)
Ғылым және технология
In this video I will show how to replace the valve cover on a BMW N20 engine. The car on the video is BMW X1 xDrive28i 2015 (E84). This engine is used in a wide range of BMW models. See the full list of models and years here en.wikipedia.org/wiki/BMW_N20.
I've used URO aftermarket valve cover, which is second best after the OEM (and it's half the price): amzn.to/3sqdQxM
You can also buy the OEM valve cover: amzn.to/3xAII0Y
Special tools I used:
1. Mini Ratchet with bits amzn.to/3w2JEuE
2. E-Torx sockets and Torx bits set amzn.to/3lROAhm
3. Torque Angle Meter amzn.to/3cnTQGh
4. Wiper Arm Puller amzn.to/3fggoL5
5. Telescopic Magnet amzn.to/3fgnVJK
6. Torque Wrench amzn.to/3d64SPQ
7. Mechanics Tool Set amzn.to/39fs90x
8. Work Light I use amzn.to/2P701G1
Please replace the whole cover and not just the gaskets. If you are going to reuse your old cover, replace all gaskets on the cover, not just the main gasket.
Please hit Like and Subscribe if I helped you with this video.
Пікірлер: 47
Very professional! Your list of tools to purchase from Amazon is an added bonus to your step-by-step instruction guide. I have watched many videos on how to fix different things, but this one is the best I have seen. You not only showed step by step on how to remove the valve cover but also how to replace as well. Many thanks, I saved my daughter $1400.00 by not going to the BMW dealership. I found a URO brand valve cover "which is a recommended brand to use" from Amazon for 179.00, ten hours later from start to finish, and the job is complete. I could not have done it without your help. Thanks again, and may God bless you!
@IgorKadulenkov
Жыл бұрын
Thank you! I am glad it worked for you. Reviews like yours keep me going. And I do think that BMW makes it too hard to maintain their cars and their maintenance costs are outrageous. Congrats on saving $1400.
This video was very useful. It save me $2000 from BMW. I was able to replaced my wife's Volve cover from her X1 2015 model with no issues although it took me two saturdays(Was waiting on the valve cover to come) The tools on the link was very accurate and without them I couldn't do the job. Thank you very much for putting this video together.
With your videos help I just did my wife’s valve cover in just under four hours in our parking lot keep making great repair videos very thorough ! Thank you kind sir
@kittehfoodz
Жыл бұрын
What took so long? This should be a 2 hour job man, you good?
Love seeing a Master Technician at work. TY for the video!
Very detailed professional tutorial. Thank you!
Just did this for my daughters car. Great video. Extremely helpful. Thanks
@IgorKadulenkov
3 жыл бұрын
Thanks for your feedback, Maggie! I am glad I was able to help. BMW is making it harder for us to DYI their cars.
Nicely done, you even got rid of all those old leaves !
@ryangelinskey2476
11 ай бұрын
That bothered me through the whole video. 😆
Great video! Just did my X1. Took me about 5 hours to do but would have taken much longer without Igor's help. Shame on BMW for making a plastic valve cover.
Great video, thank a lot, I couldnt find the ratchet for the vacuum pump removal but I used a 1/4 wrench intead, that was the hardest part, just need to be careful to not to drop the torx.
@ryangelinskey2476
11 ай бұрын
I used a torx key type wrench with a metal tube slipped on one end for better leverage. Still a pain, but it worked.
Man, this video would have been awesome a few weeks back, before I paid $1k for this repair. I love this little X1 but repairs have stacked up. Awesome video though
@IgorKadulenkov
2 жыл бұрын
Thanks! Yes the car is so much fun to drive, but it does require maintenance and repairs like this all the time.
nice filming - especially vacuum pump
I watched this video several times and bought the valve cover online. It took me 2 Saturday afternoons but I was successful! Thanks very much for this great step-by-step guide. No more oil leaking!
@NFTPlayerOne
Жыл бұрын
did you have to replace the vaccum pump as well?
@clarkse69
Жыл бұрын
@@NFTPlayerOne I did not. Might not be a bad idea since it is already disassembled.
Very good video. I did the work myself and saved a ton of money. It killed me though that the whole time you were working on the car, those leaves were never cleaned off. 😆
@IgorKadulenkov
11 ай бұрын
Haha yeah, I used the vacuum only after the filming was over. But this car just loves to attract the leaves and all sorts of other debris inside.
GREAT VIDEO THANKS !
Super great video.! I don’t know if I am brave enough to tackle that job. I would lose at least 6 bolts for sure.
@IgorKadulenkov
11 ай бұрын
That’s what the telescopic magnets are for :)
Outstanding job. Looks like slow and steady is the way to go. I might get some paint pens to mark things….old guys can’t remember where it all goes sometimes. I’ve heard others say you have to rotate engine to BDC before installing HPFP? But it seems to go right back in for you. Thanks again for making such a great video.
@IgorKadulenkov
2 жыл бұрын
Thanks Jon! I am not aware of requirement to rotate the engine. I used BMW service manual, haven’t seen such a requirement
@kittehfoodz
Жыл бұрын
I reccommend a silver sharpie or some neon nail polish to keep the injector and spark plug wires straight 😵
@ryangelinskey2476
11 ай бұрын
I used masking tape and a sharpie to mark the parts. Even so, I still forgot to plug some things back in.
This kinda helps for an N55 too
Thank you Igor! I'm in the middle of this process right now on my 2014 e84 and it's difficult, but your video has been a great help! By the way, do you have any advice about detaching wiring clips without breaking them? I've really been struggling with pulling the clips with the small metal teeth off of the various mount points, even with a screwdriver and pliers. I've broken a few clip mounts in the process... You make it look so easy that I think I must be missing something.
I did it without taking off the wipers or wiper cowl. It's doable, but it was pretty hard to take the valve cover out and the vacuum pump out.
I changed the valve cover gasket thinking that it would solve my oil leak that fell on top of the exhaust pipe and smelled a lot of oil. But that is not the case, the oil loss has decreased but it remains the same, I think I have to change the valve cover, they say it may be bent... Is this true? Thank you!
Hello, I have a 2014 X1 281i and the directions fit well. Thanks. I cranked it up on the 2nd try and it went well. The next day it took 15 cranks to start up and today it will not start at all. Any thoughts? Do I have to reset anything? Codes came up Valvetronic servomotor - short circuit or disconnection and mixture fuel-air control - too lean
@JoseAlvarado-eh1ur
28 күн бұрын
Hello, i did it last weekend, and codes came up, fuel pressure too lean. i have all week trying to start properly but it runs very bad once it hardly start. And drive it is really weird, not enough power when try to accelerate. How did you fix your problem? thanks
Igor, how many hours did it take you to replace the valve cover ?
@IgorKadulenkov
3 жыл бұрын
Hi Eliseo, it took me about 6-8 hours, but I was filming everything, so it took a bit longer.
@DjCBlaq
2 жыл бұрын
@@IgorKadulenkov how long do you think without filming ?
@IgorKadulenkov
2 жыл бұрын
@@DjCBlaq i'd say it would take me about 5-6 hours. Also, detaching the old valve cover after taking all the bolts out could take some time, I've had to apply a lot of force.
Hi , did we have to use a gasket seal when putting back the new cover??
@IgorKadulenkov
11 ай бұрын
Hello, not recommended. I just lightly greased it with motor oil
@nassimjack4450
11 ай бұрын
@@IgorKadulenkov thanks for the amazing video
is the torque angle meter absolutely necessary?
@IgorKadulenkov
10 ай бұрын
The official BMW repair guide says that it is. But I have not quite figured out how to use it.
I have the same vehicle. I had the work done of my car. Cost me three thousand dollars
wow!! nobody is going to be able to put all that back on right place!!
@danielbukowski575
2 жыл бұрын
Great movie, but I have one question, your vacuum cleaner broke? Are you sure there is no leaf left in the engine? 😜