√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

You guys are awesome for uploading these... Thank You!!👍👍

Need more videos of the 4wd variances. Not everyone is lucky enough to be working on a 2wd and I see most of the videos lean for 2wd more so thab 4wd.

I'm looking for the part number of the "Cam Bolt". Does know the GM part number?

How do you know if you need to change the timing chain?

IS THIS THE SAME PROCESS FOR A 2015 CHEVY TAHOE? THANKS

Do you have to use same dampener on chain w 3 bolt cam swap..can you use the ls6 black one...thx

Never pull the pan without replacing the oil pressure relief that is just above the oil filter, screwed into the pan itself (easily seen at 35:11 of the video) . IF the pump was replaced because of suspected oil pressure issues, chances are a new oil pump will NOT fix the problem. This oil pressure relief I mentioned is probably the issue - the spring weakens over time. Also, NEVER install the crank pulley with the front cover tight. Doing so can easily cause a misalignment with the crank oil seal in the front cover. Front cover should be tightened AFTER pulley is installed (or use a special tool for this). This will surely leak in a few thousand miles. Other than those things - this is really the proper way to replace the oil pump. The pick up tube o-ring and it's seating in the pump is the most important part. For a DIY, it's extremely difficult to get this properly installed without dropping the pan.

Doest the timing marks have to be at 12 o clock position on #1 compression stroke?

Do you loose oil when taking the differential out!? Mine making noise after re assembly! Thanks

Aren’t you the same guy that was with A1 auto parts?

Could you tag me in a video of changing the timing chain on a 07 impala lt 3.9 L

Good job, 👍

Hello my truck cranks but will start but sometimes it won’t and is sluggish sometimes i here no slap but could this be issue?

thanks

No need to replace the two rivets you drilled out at 35:38?

for vvt version?

About how many hours should a shop take to complete a job like this?

Mine don’t line up. How do correct it?

What is the size of the engine?

Have to do this job at work very soon. Not looking forward to it.

What type of puller is that called ?

@TRQ

9 ай бұрын

+curtis brunner Specialty Tools Bearing Puller Belt Wrench Engine Hoist Harmonic Balancer Installer Harmonic Balancer Puller Stretch Belt Tool Trim Tool Set

Taking every damn thing off

title isn't accurate 2011 on uses vvt whole different experience butch

This is ridiculous.. lol is this a video Of timing chain swap or a whole rebuild Of the front end? Lmao good lord

I would just replace the chain only.

This is not necessary why did you take the whole truck apart?

@TRQ

Жыл бұрын

+Travis McPherson We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ

Probably would have been easier to just pull the whole Engine 😂

To much wrk for a do it urselfer...shop is gonna cost u big...