God bless you as well!! This is a tremendous video and your attention to detail such as mentioning the O-ring and why the new filter wouldn’t fit in was excellent! Video quality and sound was also fantastic. I have a 2012 outlander with the CVT and this is virtually identical so this helped me out tremendously. Thank you 🙏

@lologroovydiy

Жыл бұрын

Thank you so much for your beautiful comment! Have a wonderful day ahead and God bless!

This was a great video, thank you for making it. Also thanks for keeping in the part with the old seal. Shows a great catch for something that can happen easily and often.

@lologroovydiy

2 ай бұрын

Thank you so much for watching and have a wonderful day ahead.

Awesome video! I love how you include your mistakes, nobody else does that, it’s very useful, and I love your intro! Keep up the good work! 🥰

@lologroovydiy

4 ай бұрын

Thank you so much for an awesome comment. Really makes the day brighter. Have a wonderful day ahead.

🙏 thank you. I replaced fluid couple times but didn’t know about this filter. Will do next time

@lologroovydiy

Жыл бұрын

Thank you for watching and have fun doing your next project. Have a wonderful day ahead.

Hey brother great job i had recommended u do this last week...thanks for the video i am doing it soon

@lologroovydiy

2 жыл бұрын

Finally did it... thanks for the support and always stay safe!

Excellent attention to detail. I have been searching for such a video to change this exact filter on my 2013 Nissan Rogue. As it turns out, the location and steps for my vehicle are almost identical. Glad I came upon your video during my research. Great work! God bless you as well!

@lologroovydiy

Жыл бұрын

Thank you so much for watching and good luck on your project.

Thank you very much for making the video, it was quite helpful. Cheers!

@lologroovydiy

8 ай бұрын

Thank you for your time watching. Have a good one my friend.

Great video for those with outlander sports/RVR/ASX as they share the lancer chasee and have the transmission filter up front as well. So many people and mechanics don't know about this filter and i fear never get changed. You need to, especially if you have a CVT!

@lologroovydiy

4 ай бұрын

That's correct, because even if the transmission fluid is change regularly the dirty filter will restrict the flow of fluid. Thank you for watching and have a wonderful day ahead.

Nice tutorial. I changed the same filter on a 2017 Outlander Sport last week. The location of the components were about the same as your car. The bottom screws holding the battery bracket are tough to get at and the last screw holding the transmission cooler next to the engine was tightened from underneath. The job got completed thanks for showing the way.

@lologroovydiy

6 ай бұрын

Good to hear that everything went well. Thank you for watching the video. Have a wonderful day ahead.

I also use the "OBD POWER CONNECTOR TO CONNECT ANOTHER BATTERY for keep my ECU Memory" And then follow your procedure. Great job thanks your video.

@lologroovydiy

Жыл бұрын

That's a very good idea, so you won't loose anything when you remove the battery connection. Thank you for watching and have a good day ahead!

Great video! I have a 2011 Outlander and this is perfect!

@lologroovydiy

11 ай бұрын

Thank you so much for watching and if your vehicle is an Outlader, I encourage you to check out this link kzread.info/dash/bejne/gpxtlJiqgdCyf8o.html It might be helpful. Thanks again and have a wonderful day ahead!

A great instructional video Thank you for uploading this valuable knowledge on you tube.😊😊😊

@lologroovydiy

3 ай бұрын

You're welcome and thank you for watching. Have a wonderful weekend!

Good vid. Lucky you caught that old seal. I had that happen with an engine oil filter seal. Thanx

@lologroovydiy

Жыл бұрын

I had an experience with the seal of my engine oil filter and it was a mess when I start the engine. Have a wonderful day ahead and thank you for watching!

Wow GaLinG nmaN ni LoLo groovey nice sharinG video

Wow 😮 may natutunan nanaman ako sayo kabayan ,,longtime no see how are you doing these days ..keep safe po lagi dyan..Nood hangang dulo Po .🙏

@lologroovydiy

2 жыл бұрын

Hello there... thanks for spending time watching and always keep safe and healthy. God bless!

Thanks my friend for sharing so nice video Wish u always healthy fun

@lologroovydiy

2 жыл бұрын

Thanks for spending time watching. Keep safe always and God bless!

Thank you for sharing!!

@lologroovydiy

2 жыл бұрын

Thank you for watching my friend!

Hi Lolo groovy ANG Galingmo Naman Big thumbs up for you Happy weekend

@lologroovydiy

2 жыл бұрын

Thank you for watching AK NAYAB. Keep safe always and enjoy your day!

Thank you, gonna do this to mine✌🏻

@lologroovydiy

Жыл бұрын

Thank you for watching and enjoy the project!

Best very Details how to video . Thank you much . I’ve Mit Outlander 2016 if the same filters .

@lologroovydiy

Ай бұрын

I don't have any knowledge on the outlander cooler filter but here is a link that might help you with what you need... kzread.info/dash/bejne/gpxtlJiqgdCyf8o.htmlsi=EjZ1t_EkorB3Rvyn The dealer is the best way to get the parts. Thank you for watching and have a wonderful day ahead.

Very good video

@lologroovydiy

2 жыл бұрын

Thank you so much for watching!

Hi Lolo Groovy! I hope you could upload more videos for your Lancer tutorials. God bless 😊

@lologroovydiy

Жыл бұрын

Maraming salamat AK NAYAB for watching! Rest assured I will post more videos. God bless!

nice sharing. great help. new supporter :)

@lologroovydiy

2 жыл бұрын

Maraming salamat sa pag suporta AK NAYAB! Keep safe always and God bless!

Wow GaLinG nmaN ni LoLo groovY sa repairinG nicE sharinG videO

@lologroovydiy

2 жыл бұрын

Thank you for watching. Keep safe always and God bless!

Great lolo. Big help, especially to those have cars

@lologroovydiy

2 жыл бұрын

Thanks for your support and always keep safe. God bless

Galing pala ninyong mekaniko lolo Groovy👍

@lologroovydiy

2 жыл бұрын

Maraming salamat ulit ng marami AK NAYAB! God bless!

Thank you so much! I am doing this right now and wanted to know if youtube had a video about it. You did an excellent job explaining it. By the way, do you happen to have part number for filter and o ring?

@lologroovydiy

16 күн бұрын

Glad it was helpful! Part No.: 2824A006 is for the cloth filter in the cooler. Part No.: 2920A096 is for the rubber O-ring. Thank you for watching and have a wonderful day ahead.

Ang galing mo naman Lolo

@lologroovydiy

2 жыл бұрын

Konti lang hehe. Maraming salamat AK NAYAB. God bless!

good video

@lologroovydiy

2 жыл бұрын

Thanks for watching my friend!

First lolo galing mo talaga

@lologroovydiy

2 жыл бұрын

Paminsan minsan AK NAYAB! Salamat ulit sa pagbisita. God bless!

Ang dami mong Alam Ak Nayab pagdating sa sasakyan.. great sharing.. 👍...

@lologroovydiy

2 жыл бұрын

Maraming salamat sa walang sawang suporta AK NAYAB! God bless

Thanks

Very good video and well explained. Do you know if the 2013 Outlander has this filter in the same area as this Lancer?

@lologroovydiy

Жыл бұрын

I hope this video helps you with what your looking for... kzread.info/dash/bejne/gpxtlJiqgdCyf8o.html Thanks for watching and have a wonderful day ahead.

@aureliosalazar1033

Жыл бұрын

@@lologroovydiy thank you very much for the other video you sent on the paper filter.

hi lolo groovy, thank you for your video, i appreciate if you can make simple schedule on excel sheet and share here. thank you lolo, more power on your channel.

@lologroovydiy

Жыл бұрын

Thank you for watching AK NAYAB. I'll try to do it next time. Keep safe and have a wonderful day ahead!

Salamat tay

@lologroovydiy

2 жыл бұрын

Salamat din sa pagbisita AK NAYAB! Keep safe always and God bless!

Tnx

Keep em cool as many ways of reduced coolant water ratios, both filters and best cvt fluid each 30k, seal all leaks of radiator plenum, keep radiators clean.

@lologroovydiy

2 жыл бұрын

You've got it right! Thank you for watching.

very useful, and informative video, thanks for it! Will do a CVT oil change in my 2008 Lancer. Sump filter was recently changed, but the cooler filter wasn't. Do I need to drain all the oil from the transmission to change the cooler filter? my other problem is, I cant get my hands on genuine Mitsubishi CVTF J1, will Motul Multi ATF work for me? Thanks in advance!

@lologroovydiy

Жыл бұрын

You can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. After market filter is ok, as long as all the specs are the same. I hope this will help. Thank you for watching!

@JohnPRao

2 ай бұрын

@lologroovydiy please share the link to buy the filter; thank you!

@lologroovydiy

2 ай бұрын

Part No.: 2824A006 is for the cloth filter in the cooler. Part No.: 2920A096 is for the rubber O-ring for the housing cover. Good luck on the project. Thank you for watching and have a wonderful day ahead.

Hi Lolo. Thank you for this video. I have a few questions: 1. Is it same procedure for 2018 outlander? 2. I already got the cvt fluid changed by dealer. Will I need to top up the fluid after I change the filter now?

@lologroovydiy

4 ай бұрын

I'm not familiar with the outlander, but if your transmission cooler filter housing location is same as in my video... you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better. Just to verify, I have a link for a 2016 outlander and please compare the location of the filter housing with your car. If this is not the location then it should be under the battery same with the Lancer. kzread.info/dash/bejne/gpxtlJiqgdCyf8o.htmlsi=-x46ZLTbcMOHRFt2 I hope this will help. Good luck on your project. Thank you for watching and have a wonderful weekend.

Lolo I love your videos I have done the cvt fluid change and filter and now the Inter cooler filter. However the paper filter I received is about half cm bigger. (Yes I did make sure the gasket was off from the previous filter) I had to fit it there a little tight but I was able to close it back up with a new o ring and was able to tighten up the bolts and saw no leaks. Do you think I should be safe?

@lologroovydiy

2 жыл бұрын

As long as the fluid level is correct and you don't have a leak... it should be fine! Drive it for a while then check the fluid level and check for leaks again, just to make sure. Thank you for watching.

@rosarioexecutive

2 жыл бұрын

@@lologroovydiy my car is cvt, at what miles Ineed to change the filter?

@lologroovydiy

2 жыл бұрын

@@rosarioexecutivewhen you change the cvt fluid, you can also change the cvt cooler filter. Check your owners manual but for me I do it around 50 thousand miles.

@hispanicjohnson

Жыл бұрын

Do you by any chance know the torque of those 4bolts?

Haha, I have done that before with the seal! Gotta check things really well and not force anything if it does not fit.

@lologroovydiy

Жыл бұрын

I learn new things everyday but unfortunately some are from my mistakes Hehe! Thank you for spending time watching and have a wonderful day ahead.

Hi Lolo, how often should you change this cooler filter? I just gave my lancer to the garage for a fluid change (97k kms) I believe they only changed the fluid, gasket and screen filter.

@lologroovydiy

Жыл бұрын

I change the filter same time with the transmission fluid. The ideal interval is every 50,000 miles. Thank you for watching and have a good day ahead!

What did you torque the transmission cooler filter housing to. ? Would really appreciate it because I can't find any torque specs for my lancer anywhere.

@lologroovydiy

2 жыл бұрын

I couldn't find any torque specs for the cover too... I only hand tightened the bolts! Thank you for watching and keep safe always!

@drivewayhero

2 жыл бұрын

35 inch pounds

Hello Lolo I'm new to your channel , because of this video, now I know there is an extra filter for the transmission on the Mitsubishi lancer, I'm about to go see one and buy a 2015 Mitsubishi lancer with just hit 70.000 the owner claim he have never change the transmission fluid o it,do you think is safe to buy. Owner claims the car drive fine Thank youTony from Austin tx

@lologroovydiy

Жыл бұрын

Most CVT cars recommend to change the fluid at 60,000 miles. Sorry I can't make a comment or suggestion... cause I don't know the driving history of the car. CTV transmission is very tricky... somtimes problem will show up when you change the fluid! Better to have a good mechanic take a look before you decide. Thank you for watching and have a good one.

5:37 did you just playback in reverse that part? lol. thanks for video... i have outlander sport 2015, do i need to change mine too? its over 100k km

@lologroovydiy

Жыл бұрын

You have very sharp eyes. Check your owners manual it should say how many km before you change the fluid. I change mine at 60,000 miles. Thanks for watching and keep safe always.

Hi do we need to drain the oil before doing or can we change at the same time.

@lologroovydiy

2 жыл бұрын

The filter can be change the same time while draining the oil. Thank you for watching and enjoy the day!

Do you have the part number for the o ring you took out at 5:30? Please let me know, thank you

@lologroovydiy

11 ай бұрын

I don't have the part number anymore. It was purchased from the Mitsubishi dealer and I just gave them the VIN#. Thank you for watching the video. Have a wonderful day ahead.

What brand and size of universal socket ast you are using?

@lologroovydiy

Ай бұрын

Its a 3/8 universal socket adapter from Craftsman to remove the plate that holds the battery. Thank you for watching and have a wonderful day ahead.

hi, do u have to drain all the fluid out ? is it ok to change just the small filter ?

@lologroovydiy

4 ай бұрын

If your fluid is still good you can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. I hope this will help. Thank you for watching!

My car has an irregular idle when driving my mitsubishi asx auto. Could the filter be a problem. Also are there sensors on the gearbox

@lologroovydiy

Жыл бұрын

There's a lot of reasons for a car to have an irregular idling. If I were you, I'll have a good mechanic check it out. If your car is equipped with transmission cooler filter, might as well change the filter. It is cheaper than breaking the transmission. Thank you for watching and have a wonderful weekend.

Good video Lolo. Meron din po bang transmission cooler filter ang Lancer ex 2014 model? Thank you, Lolo Groovy. Ingat po palagi and God bless po.

@lologroovydiy

Ай бұрын

Maraming salamat sa suporta AK NAYAB. Palagay ko mayroon ding transmission cooler filter yang Lancer EX mo. Hindi lang ako masyadong pamilyar sa ganyang modelo. Subukan kong mag research at pag may nakita akong information Message kita. Maraming salamat ulit at God bless!

Hi @Lolo Groovy Diy! my 2009 lancer es is leaking transmission fluid on the front passenger. do you have any idea where its leaking from?

@lologroovydiy

7 ай бұрын

Try checking the area where the inner right axle is connected to the transmission. If the area is wet with fluid, the rubber seal might be weak or damage. Good luck and thank you for watching.

@kylev7440

7 ай бұрын

Thank you lolo!

Noce DIY loloGroovy!

@lologroovydiy

2 жыл бұрын

Thanks and God bless!

Before you change this up filter have you drained the transmission fluid, or it’s alright to take off top filter without draining all the fluid.

@lologroovydiy

Жыл бұрын

If your transmission fluid is still good... you can change the top filter without draining the fluid! Estimate the fluid that will drip out of the housing and replace the same amount back. Thank for watching and have a good day.

@djchameera

Жыл бұрын

@@lologroovydiy thanks 🙏

If I changed oil 2 months ago I can still do it. I will have to add oil?

@lologroovydiy

6 ай бұрын

The positon of the filter is higher than the transmission, so you will only lose the fluid that is in the filter housing. Yes you can do it; just calculate the amount of fluid that will drain from the housing and put the same amount back. Good luck and thank you for watching.

Hi, my Nissan Murano cvt is experiencing about 5 6 seconds delay when gear shifting. Sometimes, it doesn't engage at all. Is that a symptom of a dirty cooler filter? FYI, I just had fluid change and washed the strainer. But the issue persists. The mechanic had no idea about the external cooler filter. Thanks in advance.

@lologroovydiy

Жыл бұрын

If your car is equipped with a transmission cooler filter, you can try and replace it. I hope the problem goes away with changing the filter. If the problem still persists the best thing to do is have it check by an expert. Thank you for watching and hope the problem will be solve.

@TAD3011

Жыл бұрын

Are you sure the mechanic poured the correct CVTF NS3/J4 fluid ❓🤫

If i change this cooler filter without emptying the transmission fluid. Is it ok？ Or it will leaks when i remove the cooler filter housing？ Thank u

@lologroovydiy

2 жыл бұрын

I didn't drain the fluid when I replace the filter in that video. Make sure to place paper towel or clean rug under the housing cause there's some fluid sitting in the cooler housing. Good luck and keep safe! Thank you for watching.

Is this the same procedure for the 2017 Mitsubishi Outlander SPORT ES?

@lologroovydiy

2 жыл бұрын

I have no knowledge of the Outlander cooler filter change. Here is the link of a video that might help kzread.info/dash/bejne/gpxtlJiqgdCyf8o.html . Thank you for watching and good luck on your project!

@mikebuckets

2 жыл бұрын

@@lologroovydiy thanks

How do you access the bottom 10mm bolt on the back side of the transmission cooler housing at 2:44

@lologroovydiy

11 ай бұрын

Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.

Can a bad filter make the transmission to heat up while going up hill? I have a 2014 and it heats up everytime i tried to road trip going up a mountain.

@lologroovydiy

Жыл бұрын

If the filter is dirty, it will restrict the circulation of fluid and might cause a problem. Thank you for watching and have a wonderful day ahead.

Does the 2016 Lancer have the same filter

@lologroovydiy

5 ай бұрын

Should be the same. Thank you for watching.

Will this be the same for a 2015 Outlander Sport 2.4L ?

@lologroovydiy

2 жыл бұрын

I'm not familiar with the Outlander engine and very sorry I can't answer the question. Thank you for watching!

@mooxima

2 жыл бұрын

Yes is the same I just did it

The autopart store didnt have the filter. Where did you get them from?

@lologroovydiy

11 ай бұрын

I purchased the parts from the Mitsubishi dealer. Thanks for watching!

hi lolo, can I change this filter if my transmission oil is full? would it leak a lot of oil? Thanks!

@lologroovydiy

11 ай бұрын

Yes, you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better. Good luck on your project. Thank you for watching and have a good day ahead.

I have Lancer 2012 GLS EX CVT. We found oil in cooler and after inspection it was found that Gear cooler is faulty and mechanic asked me to replace it. Do we need to change the filter as well and what about transmission oil. Please guide

@lologroovydiy

7 ай бұрын

If the transmission fluid is contaminated with engine oil, its better to replace the fluid together with the filter. The transmission might slip because of the engine oil.

What is the OEM part number for the "O-Ring" on transmission cooler cover? Can someone send me a website link to purchase that O-ring?

@lologroovydiy

9 ай бұрын

Try this part number: 2920A096 but check it out first before buying or better if you can go directly to the dealer. Thank you for watching. Have a good day ahead.

Is this the same procedure on a 2018 Mitsubishi outlander sport transmission? Or is it under the car?

@lologroovydiy

Жыл бұрын

I haven't work with an Outlander and not familiar with the transmission filter location. Here's a video that might help you with what you need. Thank you and have a good day ahead. kzread.info/dash/bejne/gpxtlJiqgdCyf8o.html

@Bowtie427

Жыл бұрын

@@lologroovydiy Thanks a million!!!!

Lolo did you just replaced the transmission filter cooler or did a flush? and what are those extender you using for the ratchet to reach the bolts underneath the battery stand? 1/2 drive or 3/8? salamat po

@lologroovydiy

2 жыл бұрын

Thank you for watching my video! I just replaced the transmission fluid and the bottom filter. The size is 3/8 for the extension. Thanks again and good luck on your project AK NAYAB! God bless!

How do you know if it’s time to change the filter will the transmission start slipping

@lologroovydiy

Жыл бұрын

I change my CVT fluid and filter at 60,000 miles. My plan is to change it again after 35,000 miles. Thanks for watching!

I am hanging trouble finding where to purchase for 2011 MIT Lancer ES

@lologroovydiy

2 жыл бұрын

Try ordering it from a dealer... they should have the parts for your car! Thank you for watching and good luck.

Thanks for the video am also doing it tonight But have a problem with my lancer now days model 2016 there’s how to bring high sound inside like a sport car once it’s neutral u can here that sports sound what can I do please?

@lologroovydiy

2 жыл бұрын

Thank you for watching my video. Regarding the high sound you're experiencing with your car... I feel that for now I don't have an answer. There's lots of places that the noise can come from and the best way is to have a certified mechanic to assess the problem. Good luck and I hope the problem would bee fix!

Can i take the tubes connected to the housing off? I'm having trouble trying to get that bottom corner screw off

@lologroovydiy

Жыл бұрын

I didn't remove the rubber tube because it might leak. You can try... just make sure that there's no leak! Thanks for watching and good luck on your project

@YUH-cf9ye

Жыл бұрын

@@lologroovydiyhow did you reach that bottom corner screw? I am having trouble reaching it?

@lologroovydiy

Жыл бұрын

I use a universal joint socket adopter to remove the volts. Thanks again and good luck on your project.

God bless us all! 🙌🥰

Lolo, how about changing fuel filter of lancer. Thanks.

@lologroovydiy

2 жыл бұрын

Maraming salamat sa suporta AK NAYAB! Hindi ko pa napalitan yung fuel filter ko, kaya wala pang video. Naka schedule to next year bago mag summer at malamig na dito mahirap gumawa. Yung fuel filter ng kotse ko doon sa loob ng gas tank. Pump at filter assembly. Keep safe always AK NAYAB at God bless!

I have lancer 1.5 AT ( not CVT) is this is only filter that my transmission have or there is another one ?

@lologroovydiy

Жыл бұрын

I'm not familiar and have not come across with the model of your vehicle. I'll look for information regarding the filter for your vehicle. My lancer have a screen filter inside the transmission pan. Thank you for watching and good luck.

@ivicatasik7923

Жыл бұрын

@@lologroovydiy your lancer is CVT?

@lologroovydiy

Жыл бұрын

@@ivicatasik7923 yes its CVT.

I already change my oil cooler and the coil filter but still the color of radiator coolant turn pink that makes my car overheating Mitsubishi Lancer 2014 please help me to solve the oberheating

@lologroovydiy

5 ай бұрын

Check your engine oil dip stick and the oil filler cap, if the oil is cloudy or mix with anti freeze it might be a blown head gasket. I'm not sure why your anti freeze is contaminated. Better take it to a certified mechanic to have if properly check before it gets worst. Good luck and hope it'll be fix. Thank you for watching.

Can you provide a link to buy it?

@lologroovydiy

Жыл бұрын

I bougth the transmission cooler filter at the dealer. If you have Mitsubishi dealer near you, it's more reliable and you'll get the exact parts for your car. Thank you for watching and have a good day ahead.

Lolo... what would happen if you run the Outlander without that filter to see if the pressure returns to normal?

@lologroovydiy

2 жыл бұрын

I have no idea what would happen... maybe if you have a dirty filter it would change the reading but if your filter is clean with or without filter it should be the same! Keep safe always and Thank you for watching.

My Mitsubishi Lancer 2014 the radiator coolant the color turn pink think mix with some oil

Very nice presentation, how can you say about Nissan CVT transmission, that normally gets hot and loose power, is there any remedy? ?

@lologroovydiy

2 жыл бұрын

I'm not familiar with Nissan. But there's this video that I watch that might give you a good explanation. kzread.info/dash/bejne/nGpkw5qpis3JXdY.html Thank you for watching and good luck.

@johnhouchins3156

Жыл бұрын

@@lologroovydiy I've found that my 2013 Nissan Juke AWD hides its filter in the same place as yours! Although not exact, it's VERY similar with the only difference being the routing of the pipes. Other Nissan CVTs have the filter located in different places. Those are also on KZread, but this is the only video even remotely close to mine!

@lologroovydiy

Жыл бұрын

@@johnhouchins3156 good to know that!

Hello bro...I have one thing to ask... recently I just change my CVT oil and the bottom filter...but I didn't change the cooler filter...can I change the cooler filter after the CVT oil change? Tq in advance

@lologroovydiy

2 жыл бұрын

Yes, you can change the cooler filter. Just make sure to place a plastic sheet at the bottom of the filter housing to catch the small amount of fluid that will drip. If possible measure the fluid that comes out and put back the same amount. Thanks for watching and stay connected.

We can used the same of nissan J32 part 31726-1XF00. (Cost saving)

@lologroovydiy

Жыл бұрын

I'm not sure. I only used the Mitsubishi filter brand. Thank you and good luck on your project.

@supachai7441

Жыл бұрын

It is the same part. (Jatco CVT) It can replacement

Where do I buy the Filter

@lologroovydiy

2 жыл бұрын

I got the filter from the dealer. Thanks for watching!

@Bighotwheelhunter

2 жыл бұрын

@@lologroovydiy how much

Is your lancer automatic transmission?

@lologroovydiy

Жыл бұрын

It's an automatic CVT transmission. Thank you for visiting my channel and have a wonderful day ahead!

Ano pong engine? 4B10, 4B11..ano po ba? If ever ba.. same lang ba ng cvt cooler filter mga yan o iba na po ang size/spec? Baka me idea po kayo ng para sa 4B10 engine ng part number baka pede pa share. Salamat po..

@lologroovydiy

2 жыл бұрын

Nag search ako ng parts pero ang hinahanap nila yung VIN number ng sasakyan. Kung wala yung VIN# hindi nila alam kung paano ang gagawin! Sorry at di ko masagot ang iyong tanong pero mag try pa din ako. Keep safe always!

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@lologroovydiy

4 ай бұрын

Thank you for your support my friend.

Lolo san ka po nakabili ng gasket po?

@lologroovydiy

Жыл бұрын

Sa Mitsubishi dealer ako bumili. Salamat sa pagbisita AK NAYAB. God bless!

@seanmontana13

Жыл бұрын

Salamat po lolo. Try ko po magpa order sa casa. Kasi laging 2 to 3 weeks ang dating ng piyesa pi

no rattle gun

I drove 45000 kms after changing cvt gear oil . When should I change it again Model:2014 lancer gt

@lologroovydiy

Жыл бұрын

I replaced my filter every 50,000 miles. If I have the time maybe I'll replace it even at 30,000 miles. Thank you and have a good day ahead.

Is there another cvt oil filter under the car near the drain pan? kzread.infoU_WV-3-muQw

@lologroovydiy

10 ай бұрын

I think that this is a different Mitsubishi model. As far as I know there's two filter. One is shown on my video and the other filter is located inside the transmission fluid pan. Thank you for watching and have a good day ahead.

My dealer said that part isn't serviceable, they wanted me to change the whole part.

@lologroovydiy

Жыл бұрын

I already change my filter twice and also purchased the filter from a Mitsubishi dealer. Good luck and hopefully they sell you the filter.

@munoz_rottweilers3238

Жыл бұрын

@@lologroovydiy my car warning came on and said "slow down" I think the transmission was getting too hot.

@lologroovydiy

Жыл бұрын

Maybe the fluid circulation is bad because of a dirty filter.

@fitcwebb

Жыл бұрын

@@munoz_rottweilers3238 Yes, several mechanics have stated that when this filter gets clogged, it can cause overheating of the transmission. Ideally we want to do the maintenance ahead of time to prevent this. This is why I'm now on a 30,000 mile schedule to change the fluid and both filters. This one and the one in the pan underneath

@munoz_rottweilers3238

Жыл бұрын

@@fitcwebb they never recommended I change the filter and I take it to the dealer for service all the time. I finally got it changed tho after requesting it

Removed 3 screws and tightened 3 screws. At 4 he forgot ❓😃

@nosrednac8948

Жыл бұрын

It's was so misleading I had a sh*tty time taking the forth one out

Sir how do you open bolt number 4? It is very tight spaces very hard to reach 😩

@lologroovydiy

11 ай бұрын

Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.

2016 is not the same

@truwarrior22

Жыл бұрын

I think it’s easier.

@Bighotwheelhunter

Жыл бұрын

@truwarrior22 nope I couldn't find it

@truwarrior22

Жыл бұрын

@@Bighotwheelhunter My bad was thinking the Outlander, it’s no longer a cooler, just a cover.

@Bighotwheelhunter

Жыл бұрын

@@truwarrior22 so I don't have to worry about it

@truwarrior22

Жыл бұрын

@@Bighotwheelhunter I have over 100K on mine, no issues. Looks like 2016 Lancer has one, 2824A006

Thanks you you are so much help!🙏🙏🙏🫡

@lologroovydiy

6 ай бұрын

You're welcome and thank you for watching too. Have a wonderful day ahead.

How did u get the 4th bolt

@lologroovydiy

Жыл бұрын

Use the same socket to remove the 3 bolts only with extension. A bit tricky though. Thank you for watching and have a good day ahead.

@creepyscope7824

Жыл бұрын

@@lologroovydiy took me 3 hours