Find the parts used in the video on CarParts.com just there carparts.solutions/RAM1500
⚙️ NEEDED CARPARTS AND PRODUCTS
- Starter : carparts.solutions/Starter_RA...
💪 TIGHTENING TORQUES
- Starter mounting bolts : 50 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- carparts.solutions/ToolBox
List of the tools we used to replace the starter on a Dodge RAM 1500 :
- Ratchet
- Extender
- 10mm socket
- 8mm socket
- Fork
- 13mm wrench
- Gimbal
- 15mm socket
- Torque wrench :
20 to 250 Ft-lbs carparts.solutions/TorqueWren...
100 to 600 Ft-lbs carparts.solutions/TorqueWren...
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to replace the Battery 2009-2018 Dodge RAM 1500 ⚡: • How to replace the Bat...
- How to jack your Dodge RAM 1500 safely : • How to jack your 2009-...
⚠️ CARPARTS.COM'S INFOS
- For safety reasons, we advise you to disconnect the battery.
- The starter is located under the vehicle, on the driver side, under the junction point between the engine block and the catalytic converter.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Disconnect the battery
0:37 How to pull up your RAM 1500
1:17 Remove the mudguard
1:43 Where is the starter ?
1:59 Remove the starter holding bolts
2:43 How to remove the starter ?
2:57 Put the starter back
3:11 Screw the starter holding bolts back + tightening torques
3:27 Put the power terminals back
3:50 Reconnect the battery
4:00 Put the mudguard back
4:12 Put your RAM 1500 on the ground