Find the parts used in the video on CarParts.com just there carparts.solutions/CAMRY
⚙️ NEEDED CARPARTS AND PRODUCTS
- Wheel Hub : carparts.solutions/FrontWheel...
- Wheel bearing : carparts.solutions/FrontWheel...
- Front brake backing plate : carparts.solutions/FrontBrake...
- Penetrating oil
- Brake cleaner : carparts.solutions/BrakeCleaner
- Assembly grease
- Silicone grease
💪 TIGHTENING TORQUES
- Strut lower bolts : 155 Ft-lbs
- Tie rod end holding nut : 36 Ft-lbs
- Front lower ball joint nut : 90 Ft-lbs
- Brake caliper mount bolts : 79 Ft-lbs
- Wheel hub nut : 217 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Toyota Camry :
- carparts.solutions/ToolBox
List of the tools we used to replace the front wheel hub and wheel bearing on a Toyota Camry :
- Breaker bar
- 30mm socket
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Wheel lug wrench
- Ratchet
- 17mm socket
- Clamp or iron thread
- Extender
- 10mm socket
- Flat head screwdriver
- Ball joint puller
- Pliers
- 19mm wrench
- 22mm socket
- 22mm wrench
- Pin punch
- Plastic mallet
- Big flat head screwdriver
- Hammer
- 10mm wrench
- Vice
- Fork
- Circlip pliers
- Hydraulic press
- 44mm bearing dismantling cup
- 74mm bearing dismantling cup
- Wire brush
- 59mm bearing dismantling cup
- Torque wrench :
20 to 250 Ft-lbs carparts.solutions/TorqueWren...
100 to 600 Ft-lbs carparts.solutions/TorqueWren...
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2011 Toyota Camry
- 2012 Toyota Camry
- 2013 Toyota Camry
- 2014 Toyota Camry
- 2015 Toyota Camry
- 2016 Toyota Camry
- 2017 Toyota Camry
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Toyota Camry safely : • How to jack your Toyot...
⚠️ CARPARTS.COM'S INFOS
- We recommend loosening the nut on the end of the transmission once the vehicle is on the ground. If your vehicle is equipped with aluminum rims, you will need to remove the wheel first before you can remove the central rim cover.
- When you change your wheel hub or your wheel bearing, we recommend that you also change your brake backing plate.
- Don't forget to remove the cable that you used to hold the caliper assembly together.
- We recommend replacing the hub nut with a new one.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:11 Loosen the wheel hub nut
0:31 How to lift your Camry
1:07 Remove the brake system
2:08 Remove the ABS sensor
2:22 Remove the outer tie rod
3:00 Loosen the lower ball joint
3:30 Remove the strut base bolts
4:35 Remove the wheel knuckle
5:13 Remove the brake backing plate bolts
5:42 Remove the wheel hub
7:16 Why you should also replace the backing plate
7:41 Remove the front wheel bearing
8:05 Clean the wheel knuckle
8:25 Replace the bearing
10:03 Put the backing plate back
10:32 Put the wheel hub back
11:46 Put the wheel knuckle back + tightening torques
13:56 Put the brake system back + tightening torques
14:51 Put your Camry on the ground
15:34 Tighten the hub nut + tightening torques"