How to replace the front shock absorbers Golf mk5 ➿

Автокөліктер мен көлік құралдары

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Suspension strut support bearing : bit.ly/suspensionstrutsbole12...
- Shock absorber : bit.ly/frontshockabsorberbole...
- Penetrating oil
- Spring : bit.ly/bol-f041033en
- Copper grease : bit.ly/coppergreaseen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Volkswagen Golf mk5.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Golf mk5 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 17mm socket
- 6mm Allen socket
- 22mm Offset wrench
- 10mm spanner
- 18mm spanner
- 19mm spanner
- Socket wrench
- Flat head screwdriver
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- 13mm socket
- 16mm socket
- 27mm socket
- T-handle wrench
- Snap ring/ Lock ring
- Hammer
- Correction fluid
- Spring compressor : maclede12.co/springcompressor... : maclede12.co/springcompressor... or maclede12.co/springcompressor...
- Shock absorber head removal kit : maclede12.co/shockabsorberhea...
- Chisel
- M14 Triple square socket
🔝💪Safely lift your Golf mk5 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
- Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.
Usetool's infos
- During this operation, you will work on the steering system of your car.
- When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • ASTUCE : Soulever son ...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:17 Remove the shock absorber
4:50 Set the new shock absorber up
7:18 Replace the shock absorber

Пікірлер: 12

  • @UseTool_EN
    @UseTool_EN2 жыл бұрын

    BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

  • @garethdempsey1369
    @garethdempsey13692 жыл бұрын

    My new favourite MKV KZread Channel. Love how you put the torque values for each bolt in the video. Saves me looking at the VW Book. 👌

  • @pzarelli75
    @pzarelli756 ай бұрын

    haha, I skipped ahead, and I thought you were tapping a pencil into the steering knuckle pinch point! Good video, thanks

  • @roycameron6943
    @roycameron69432 жыл бұрын

    Great video 👌🏼

  • @Drifter077
    @Drifter0773 ай бұрын

    What tools (make) you're using?? Looks quality

  • @lennycook206
    @lennycook206 Жыл бұрын

    How about a tutorial with bolts that you haven't already replaced with new ones? You know! Real world situations with rusted bolts and corroded top strut Allen head etc?

  • @thedude4795

    @thedude4795

    Жыл бұрын

    its implied. Anyone with _some_ experience working on cars know that. But in case anyone wants my two cents, I can recommend WD-40, regular can on impossible bolts. Worked so much better than CNC's Rust-off, and even propane flame

  • @jaimz33
    @jaimz33 Жыл бұрын

    Your website isn't working

  • @jamesdrone4562
    @jamesdrone4562 Жыл бұрын

    Are your torque values in Newton Meters?

  • @UseTool_EN

    @UseTool_EN

    Жыл бұрын

    Hi @James Drone. Yes they are.

  • @4ndy65
    @4ndy65 Жыл бұрын

    Half of thast work in not needed Leave the hub alone Use a spring compressor in situ This is not the best or easiest way to do this job

  • @krzysiekv12

    @krzysiekv12

    5 ай бұрын

    If you are a big guy you can kick the hub down and the shock will go in

Келесі