www.efloorball.net/
How to replace the grip
Floorball grip
Floorball grip is the most worn part of the floorball stick. Floorball grip provides power transfer from your hands to the floorball stick and improves feeling and accuracy when you are working with the ball. With worn floorball grip your hands will slip while you are playing and your shot will never be as accurate and tough as with a quality and new floorball grip.
So why do you need to change your floorball grip on your floorball stick?
As you have read - the floorball grip ensures the transfer of the energy from your hands to the floorball stick and improves your work with the ball. Another plus is that by regular replacing the floorball grip you can extend the life of your stick and maintain its quality.
Do you want more reasons? If it is not enough for you that you will be a better shooter with quality and unused floorball grip, there are several other reasons:
1. better holding comfort
2. better sweat removal, floorball stick will not slip in your hand
3. you can adjust the appearance of the floorball stick exactly as you like
Floorball grips vary in the material, softness, perforation, and sweat-absorbing ability. Go through our offer www.efloorball.net/ and choose the one that will suit you best. If you want advice write to our e-mail: info@eflorbal.cz and we will be happy to help you.
How do you find out that you need to replace the floorball grip?
In the middle of your workout, when the grip gets warm, grab the floorball stick between your hands and turn it against each other as if you want to make a fire using a stick.
If the floorball grip is spinning, it's time to replace it with a new piece.
How to change floorball grip?
1. The stick is ideally heated with a hot air gun or a hair dryer.
2. Remove the tape at the end of the floorball grip.
3. Start taking off the wrapping itself from bottom to top.
4. Clean the cane from the remnants of the old grip.
5. Now start wrapping a new floorball grip 1url.cz/FMfR6
6. It always starts from the plug - you have to pull the grip properly to prevent the creation of wiggle
7. Most floorball grips has an overlapped portion on the bottom edge
8. Once you get behind the plug - the hardest part, it's easy.
9. Cut the end of the floorball grip to a flat edge - you can see in video
10. Now, with the electric tape, just seal the end and you're done!
How do you check that you did it right?
Take the floorball stick in your hands and cross over after floorball grip. Hands should not mind anything, everything should be where it is. That's all.