Problems getting the old battery out? Look here kzread.info/dash/bejne/hWetpMdqns2XZZc.html

Ah, yes, no-one mentions the sticky battery, seemingly impossible to remove. I finally fixed it by threading a wide ribbon down the side of the battery then back up again, tying to a stick and pulling. Works great.

I like how you show how to open it without the proper tools thanks. You made it look flawless to open and remove the battery.

This helped me a lot, I was quite unsecure about prying it open with too much force then breaking it... also my battery was swollen so it was VERY HARD to take it out - couldnt pull it straight away just by pulling the cables, had to use a medium screwdriver to push it from the other side. Thank you so much.

Excellent video!! Thank you so much for posting this!! I was ready to scrap my speaker!

Very good, I am so glad You Help me to fixe my JBL Flip 4. Thank You again.

Thanks for your video man, aweosome, loved the real thing happening.

Nice job man, super clear advise

Very good video. It must be said that most times the old battery will not simply pull out because it will be swollen. I had to take the passive radiator off the opposite end & use a long flat head screwdriver to push it out, alternating from side to side. It took quite a lot of force but it finally came out the plug end enough to grab it with some pliers.

Nice Video BRO 👍🏻

Awsome thanx!

The Flip 4 is the best speaker in the JBL Flip line-up till date, without any doubt. I got mine in India for $91 in November 2019 but the price went up to $110 after that and has pretty much remained there. You may ask why and the reason is, the Flip 5 is not better. The Flip 4 has brighter sound and a very tight bass and mids. It also has 2 active drivers and a 3.5 aux output, the latter essential for watching video without lag / latency. The Flip 4 also has a bass boosting feature. Press the Bluetooth and the Volume down button for about 10 seconds and you enter the Low Frequency Mode. Now your Flip 4 is ready to kill. I also love my blue as my friend loves his red and others their different hues. This speaker is a perfect blend of sound, portability, style and ruggedness. It has an IPX7 rating and it lives up to it. The price at $100 is very fair all considered. And if you can by any chance place it in a corner, it blows the lid off far larger speakers! This is a speaker you will fall in love with and never tire of!! 10/10, 5*

@essentialtech388

4 жыл бұрын

Low frequency mode isnt for consumer use. I also use it though.

@apusista

4 жыл бұрын

@@essentialtech388 If not consumer use, then who is it for? I keep it permanently on. Without that, it is sorely lacking in bass.

@bluetoothbasstester

Жыл бұрын

@@apusista well lfm is made for jbl service. not for people to use it. eventually it can damage your speaker, but im also using it lol

2 questions. What song was playing to test sound? And where can I get replacement batteries?

@spreadluvvv

3 жыл бұрын

You can get the replacement battery on Amazon

good night, I also have a flip 4, my problem is that it discharges very fast, and when it has very little the horn begins to snore. Changing the battery solves that problem? And if so, what battery model do I need? Greetings, I'm from Mexico

@alexikharatishvili2453

5 жыл бұрын

Same problem here but I think it is fault of the charging port. I have bought battery and will replace soon . Ill write back

@JC-lc5fo

5 жыл бұрын

@@alexikharatishvili2453 have you changed the battery yet?

@alexikharatishvili2453

5 жыл бұрын

@@JC-lc5fo it is glued and i could not take it. Im on beach having fun far from my house where i left jbl. Ill be home in 4 days and tell what's going to be

@alexikharatishvili2453

5 жыл бұрын

@@JC-lc5fo i just changed and it works

@Bhargavarigela

4 жыл бұрын

@@alexikharatishvili2453 plz provide battery replacement link

This is supposed to be a waterproof speaker, but is it still, after the case has been opened? Does it not have. To be resealed?

@mygiguser

5 жыл бұрын

yes it is. The silicon rubber seals can be reused.

Does removeing the passive radiator ruin the waterproofing?

@mygiguser

5 жыл бұрын

No, the passive radiator is like a silicon seal.

What is the yellow plastic tool for opening with which you open the flip 4? Thanks!!

@mygiguser

4 жыл бұрын

Jorge Alberca Auto trim and panel removal tools, search on Amazon, Ebay, Harbor Freight

@JorgeAlberca65

4 жыл бұрын

@@mygiguser Thanks

I have a issue with my flip 4 the micro USB port is broken show me how to replace a new one

Is Flip4’s battery the same as Flip3’s battery?

@mygiguser

4 жыл бұрын

K Work Studio good question, but I don’t have a flip3

@JordaoDM

4 жыл бұрын

Looks like that it is. Do you know if it is the same?

Ok, did the replacement but when I plug in to charge the lights are not flashing - I did the reset but I'm sure the battery lights stayed steady and flashed as it filled up? - let's see if it charges anyways but I feel like it's not working as it did.

@KiddLoco

2 жыл бұрын

Did you ever fix this?

lol Oh my, why I didnt think this way. YOU ARE RIGHT... hair dryer

Hello friend, I have a flip 4 GG, the drivers broke, I have a spare but for the TL version, they look like they fit, but would it not affect anything? I await your response thanks.

@mygiguser

Жыл бұрын

It'll work just fine. Don't worry!

@joseenrrique1900

Жыл бұрын

Thanks for your response friend, I already put them correctly with their respective polarity, I soldered them, screwed them and assembled the device, but I notice some good details, the vocal and treble tones are slightly clearer, cute and pleasant, it gives me the feeling Since the bass is cleaner, now I get a softer and more pleasant sound.

After doing this what will happen to waterproofing

@mygiguser

5 жыл бұрын

Mr NoBody nothing, what do you think would happen?

@Kayshots

3 жыл бұрын

@@mygiguser No longer waterproof because of holes?

@Kayshots

3 жыл бұрын

@@mygiguser Quite logical.

Where can i find a battery?

@mygiguser

4 жыл бұрын

www.cameronsino.com/products/audio-and-video/speaker-battery.html?brand=JBL

I cant twist my end cap off, no matter how hard I twist it. I have the right model it just seems like its stuck. Help me please?

@WouterH.

3 жыл бұрын

Same. It's like it's glued shut. Did you ever find a solution?

@WouterH.

3 жыл бұрын

I figured it out! Use a small flathead screwdriver, and gently pry it in between the thicker edge of the end cap. If you find the right spot, it pops right off!

@AlphaPiggy

2 жыл бұрын

@@WouterH. thank you for helping me

I'm having difficulty in removing/unscrewing the end cap to gain access to the battery compartment and need assistance .

@mygiguser

2 жыл бұрын

Maybe you have a different build. Is yours a TL version?

@Ella-vq9ke

9 ай бұрын

probably late but I've had the same issue; regardless that mine is a jbl flip 4 also, the end cap wouldn't unscrew - instead I had to remove it in the same way I removed the silicone spine / radiator, it seems like it has some small clips. I tried unscrewing and I couldn't understand whyy am I not able to

So where can i buy that kind of battery

@mygiguser

5 жыл бұрын

Ton Ton Ebay or Amazon?

@mygiguser

4 жыл бұрын

www.cameronsino.com/products/audio-and-video/speaker-battery.html?brand=JBL

I had to use needle nose pliers to pull the battery out.

Is it still waterproof after opening it? Thx

@mygiguser

2 жыл бұрын

yes, it is.

It is water proof??

@mygiguser

5 жыл бұрын

yes it is. IPX7

Can't remove that side cover. Tried twisting it to open like a bottle, but it won't move.

@Fux704

4 жыл бұрын

Managed to remove it that day by sticking a knife in the gap and forcing it upwards. No amount of twisting will do the job.

@essentialtech388

4 жыл бұрын

@@Fux704 did the same thing.

Is there a bigger battery for flip 4 ?

@mygiguser

5 жыл бұрын

diehard fan sobutthurt no, there’s no space in there

Battery name.? Please..

Is it still waterproof?

@luka2669

4 жыл бұрын

Yes is it but there is a chance that water can get in

my baterry doesnt come out it looks like its blued

@mygiguser

4 жыл бұрын

Use a hair dryer to heat it up a little

Fui trocar a minha estufou tanto que furou e não saiu

you used a guitar pick? lmao atleast i know i can do it now!

So I’m not the only one who used guitar stuff to do this

You should put a link on where to buy the battery

@mygiguser

5 жыл бұрын

RagingTiger Amazon, Ebay

@RagingBad

5 жыл бұрын

Thanks, I just bought it for $17.95 in there

@DanielCastillo-ch6xx

4 жыл бұрын

What's the battery name

Hello, battery is VERY DIFFICULT to get out. I drilled it out with long bit. Needle nose players. Make sure you have patience or speaker might get thrown up against a wall!

I cant pull off the battery ?

@mygiguser

5 жыл бұрын

Cownelo Alvaroids kzread.info/dash/bejne/hWetpMdqns2XZZc.html

@monkeyjay4167

5 жыл бұрын

Cownelo Alvaroids neither can I it’s literally glued inside... gotta stick with my garbage battery I guess smh

Really struggling to get the battery out no success yet

@mygiguser

2 жыл бұрын

heating it up with a hairdryer on hot?

My JBL Flip 4 not only had 5 screws around the cap but also they were plastic soft and I could only unscrew 3 of them and got blocked with 2. Ok I got pissed because I am sure it was meant to be shitty screws so people won't have an easy time replacing the battery in it. But what shocked was that the battery was glued inside after I destroyed the cap to get in it just to see if it will be possible to replace it. JBL made it on purpose like that I am sure. What we see here in these teardowns does not reflect reality. I literally paid for a battery and I couldn't replace it...

@mygiguser

4 жыл бұрын

I hear a few people are having problems with the battery being glued in with double sided tape. The Flip4 seems not the easiest to replace the battery, but it is doable. You can use a hair dryer to heat up the battery area, that is going to make it easier to get the battery out. As for the screws, if the screw driver doesn't fit a 100% then you are going to have problems since the screws are really soft. Not sure why you destroyed the cap?

@jessicapignataro7214

3 жыл бұрын

Same! Ridiculous design. In battle with one final screw still. Using foil, rubber bands and am now actually trying to talk it out of its stubborn mood. Trying again tomorrow. Any tips on screw removal would be appreciated.

Actually. My one is not that easy to replace ...My one battery just stick on .Cant take out .....

@mygiguser

5 жыл бұрын

鄭忠勛 heat it up with a hair dryer. Make sure the battery is really discharged, and pull it out with pliers.

@rodneyeldorado6116

5 жыл бұрын

I just oiled up a butter knife and slide it in the sides of the battery slot multiple times and then the battery became loose and was able to be pulled out.

This is all wrong. Mine had more screws that were hidden and i ended up cracking it.

@Tylek101

5 жыл бұрын

Da Pharaoh Ent. Shoulda paid attention to wtf you was doing

@TabbyEgg312

3 жыл бұрын

haha

@bluetoothbasstester

Жыл бұрын

Bruh there are 3 different modell versions. Gg TL and AN. Gg has more screws Than tl or AN, did U check your SN correctly?

Ты там блать не задохнись

This video is fake, the old battery does not come out of the speaker anywhere as easily as shown. Consider this before buying a replacement battery.

@mygiguser

Жыл бұрын

this is not fake. if you wait too long, then it gets harder to remove.