Replacing the battery in a Harman Kardon Onyx Studio 1 can be a bit tricky and requires some technical expertise. Here are the general steps you can follow:
1. Make sure the Onyx Studio 1 is turned off and disconnected from any power sources.
2. Remove the rubber ring that covers the screws at the bottom of the speaker.
3. Use a screwdriver to unscrew the four screws.
4. Carefully lift the bottom cover of the speaker and disconnect the battery connector.
5. Remove the battery from the speaker and replace it with a new one.
6. Reconnect the battery connector and carefully put the bottom cover back in place.
7. Tighten the screws and replace the rubber ring.
Note that replacing the battery in a Harman Kardon Onyx Studio 1 requires some technical expertise and can be risky. If you are not confident in your ability to replace the battery, it is recommended that you take the speaker to a professional for battery replacement.
########[ Main Items in This Video ]##########
Buy Battery Replacement for Onyx Studio 1/2/3/4: amzn.to/3qntWft
#####################################
=======[ Links to tools that I use ]=======
Opening Tools:
-Screwdriver (for Game Consoles): amzn.to/43okRBM
-Screwdriver (for Mobile Phone & Tablet): amzn.to/3MJSI0D
-Security Torx Screwdriver: amzn.to/45Mh2YE
-Electric Cordless Screwdriver: amzn.to/3CbZ0Be
-Opening Pry Tools: amzn.to/42myYpP
-Tweezers Set: amzn.to/3MPmyAZ
Microscope Set:
-Microscope (Main): amzn.to/3C709tX
-Microscope (Secondary): amzn.to/43EEZiu
-Microscope Ring light: amzn.to/3WMYlzG
-Microscope Camera: amzn.to/43jco2r
Soldering:
-Hot air station: amzn.to/3WI0Jba
-Soldering Station #1: amzn.to/3OQBWQ3
-Soldering Station #2: amzn.to/3N6UDxH
-Desoldering Rework Station: amzn.to/43x8yT2
-Flux: amzn.to/45JxHvE
-Solder Paste: amzn.to/3WHXMHF
-MotherBoard PCB Holder: amzn.to/3oSvwp0
-UV Solder Mask: amzn.to/3oITKSC
-Desoldering Wick: amzn.to/43FZKuo
-Soldering Mat: amzn.to/43mycdy
Electrical:
-DC Power Supply (Main): amzn.to/3MOjViY
-DC Power Supply (Secondary): amzn.to/3qefh62
-Multimeter: amzn.to/3N73Mq9
-USB Current Tester: amzn.to/3WMYWlh
-Heating Pad Smartphone/Tablet: amzn.to/3WJT7VH
Software for Board View & Schematics:
-FlexBV: pldaniels.com/flexbv
-Phoneboard: phoneboard.co
-ZXW Tool: amzn.to/3C5e5EG
Thermal Camera:
-Seek Compact Pro: amzn.to/3N5XENR
Recording Gear:
-Ring Light: amzn.to/3qlPYPI
-Wireless Microphone: amzn.to/3ITGKAt
#### Disclaimer ####
xFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this KZread channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
xFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not xFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.