How to Replace Spark Plugs and Coils 04-13 BMW 325Ci

Автокөліктер мен көлік құралдары

Buy Now!
New Ignition Coil Set from 1AAuto.com 1aau.to/ia/1AERK00079
New Spark Plug from 1AAuto.com 1aau.to/ib/NGETK00029
1A Auto shows you how to repair, install, fix, change or replace rusted, corroded, or stuck spark plugs. This video is applicable to the 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, BMW 325 Ci
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o4H/1AXAA00013
• Pocket Screwdriver
• 10mm Socket 1aau.to/oLI/1AXAA00017
• T30 Socket
• Ratchet 1aau.to/o56/1AXAA00016
• Socket Extensions 1aau.to/oSo/1AXAA00015
• Torque Wrench 1aau.to/orr/1AXAA00044
For More Info visit us at 1aau.to/h/aQ9/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 7

  • @1AAuto
    @1AAuto3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

  • @digitalspreee1221
    @digitalspreee12214 жыл бұрын

    Great vid it was nice to see a lady working on an e46 like mine😁. I wasn't sure how to take out the ignition coils didn't want to break those things they expensive lol and thanks for the note of the cabin filter tab hook-ins. I'll be subscribing

  • @kendtchileninjah5905
    @kendtchileninjah59052 жыл бұрын

    Clean clear voice thanks for the instructional folks

  • @hethertty
    @hethertty Жыл бұрын

    men yell, you made it so easy ,like making cookies , clean and simple

  • @claudiohernandez9470
    @claudiohernandez9470 Жыл бұрын

    Thank you! Very good description!

  • @thepresident617
    @thepresident6172 жыл бұрын

    1. open hood with the latch lever up 2. turn the lever to the side to remove compartment they should pop up 3. move the seals around the comparent 4. unscrew the T40 bolts 5. unclick the stuff holding the battery cable 6. lift and remove the housing 7. take the engine cover off with a screwdriver 8. remove oil cover 9. remove bolts with 10mm sockets 10. lift cover and replace with oil top 11. ingnition cool pop up with a screw driver and pull up the cynlinder 12. use extendo counter clockwise with the torque wrench and remove old spark plug 13 check out new spark plugs and make sure it not damaged 14. install them by hand first to avoid cross threading 15. apply dialect grease on the end of the cylinder. screw it back in and lock connector back

  • @snsrealty2698
    @snsrealty2698 Жыл бұрын

    Hello i changed my spark plugs and coils now my car wont start any pointers? Do i need to have my everything put back to way it was before the car will start.

Келесі