The most entertaining "How to video" I've seen 👍🏽

@StatUpBox

Жыл бұрын

😊👍

@kerrywilliams6596

11 ай бұрын

Fully agree.

@creezygod

9 ай бұрын

Earned the subscription with that lol

Love this guy. The humor helps so much when your frustrated!

@martineokeeffe9326

2 ай бұрын

Completely agree.

Thank you. Now I have the confidence to tackle my door handle and lock ;)

The commentary is very amusing. this guy is hilarious in a great fun way of course 😂 thanks

@StatUpBox

Жыл бұрын

😊👍

I’m the handyman in my home.😊This was a great tutorial. Done in about 5 min!

Could not have done this without your video! Thanks for your time and effort.

@StatUpBox

Ай бұрын

Glad to help❤😊👍

Thank you! Your commentary is hilarious and extremely useful. Thank you for making this video and not leaving anything out...especially the death grip section. Dios te bendiga.

This is definitely the most entertaining DIY video I've seen! Completely agree 😆 Thank you! Now I know I can definitely do this by myself.

@StatUpBox

9 ай бұрын

Yay! Thank you!

Thank you! This was a great video. HD installed my door with a faulty lock and I was going to have to take ANOTHER half day off from work waiting for them to come back and fix my brand new door. Didn’t have to bc of this and doing it myself! Thank you!

Thank you! Super helpful in figuring out how to get the old lock out - it was a tight squeeze!

@StatUpBox

Жыл бұрын

Great to hear!

You're commentary is delightful

@StatUpBox

7 ай бұрын

Thank you

You are a life saver. Thank you so much for posting this. Huge bonus points for the humor. 😊

@StatUpBox

2 ай бұрын

Glad it was helpful!

Dude this guy is goated!

I did it! All by myself - I'm so proud! And it was all thanks to your very helpful and entertaining video! (One thing I didn't realize was how tightly the new mortise lock would fit into the replacement hole, but watching how you inserted it was very helpful.) Thank you so much!

@StatUpBox

3 ай бұрын

Great job!

Great helpful video my man. Thank you so much!

Just plugged mine in today. Was helpful. Thanks!

@StatUpBox

Жыл бұрын

Awesome 👍😊

Absolutely awesome commentary throughout the video, great job! Loved it!

@StatUpBox

7 ай бұрын

Thanks 😊🤗

Great narrator!

Love this video informative and hilarious at the same time. Magic hands Ja!!!

Excellent video. I couldn’t quite figure out how to get the new latch in and hold it in place while placing the screws. Also, while the handle is off is a good time to clean the frame around the handle. Something that could have been done to the door in the video.

I LOL'd through this whole thing! Informational, easy peasy, & so dang funny!!!

@StatUpBox

9 ай бұрын

👍❤😊

Very well done. 👏

I hope he does stand up comedy. I’m glad I had to watch this a few times while changing my first lock. Thanks for posting this!

@StatUpBox

2 ай бұрын

You bet

Well-done, and most importantly, extremely helpful - and entertaining narrative, too. I was in the middle of this project, getting nowhere at it (for embarrassingly simple reasons) then watched this video. Five minutes later, I was done.

@StatUpBox

Жыл бұрын

Glad you enjoyed it!

Thank you I did it . I love your sense of humor !

@StatUpBox

11 ай бұрын

You are so welcome!

Thank you Grasshopper.

That was terrific

Extremely helpful, thanks!

@StatUpBox

Жыл бұрын

Glad it helped!👍😊

LOVE IT!! Thank u! Matt Damon

@StatUpBox

9 ай бұрын

🤣😂

Great video

Love your commentary, "Grasshopper"!

@StatUpBox

25 күн бұрын

😊

😂😅😂 love this type of DIY video

Awesome instructional video!

@StatUpBox

10 ай бұрын

Thank you! Cheers!

🎉thank you for posting

@StatUpBox

Жыл бұрын

you're welcome!👍😊

5:05 But if you conquer victory, doesn't that become a defeat ? Love your sense of humor. This was very helpful

Love video nicely done and I even got a laugh at the humor! 😅

Taught me how to do it, and made me laugh! Got yourself a new sub

Educational and hilarious 😂😂😂

Love the narration. Wish all diy videos were this entertaining. I replaced my handles and lock except for some reason the latch comes out but is not locking. Not sure what i did wrong :(

@deborahhock4903

7 ай бұрын

Me too

Lol this was really helpful and funny as hell

Thank you

Great video!

@StatUpBox

Жыл бұрын

Thanks!👍😊

Really a great and entertaining video!

@StatUpBox

29 күн бұрын

Glad you enjoyed it!

Very entertaining and helpful video. Thanks.

@StatUpBox

9 ай бұрын

Glad you enjoyed it!

Excellent Vid. Wish I had watched before I dropped the lock inside the door 😂

@StatUpBox

Жыл бұрын

thanks! magnet time! 👍😊

@peggyshepard4257

Жыл бұрын

Same here!

Most replacement handle sets come with 2 inch bolts only that are too long. I went to a hardware store and bought a pack of the smallest washers: No. 6 Stainless. Two washers on the two bolts works very well securing the inside and outside sliding door handles.

Very helpful, thank you

@StatUpBox

Жыл бұрын

Glad it was helpful!

Two different locksmiths told us they couldn't do this 😂

Thanks

This was amazing

@StatUpBox

Жыл бұрын

👍😊

How do I know what size? or all door handles are the same?? Also what brand to choose because the link gives a bunch not just a specific item/door handle in amazon

“Barbecue paper” made me burst out laughing!! No truer words have been spoken.

@StatUpBox

7 ай бұрын

🤣😂

Thanks!

@StatUpBox

11 ай бұрын

Your welcome 👍😊❤️❤️

How do you know which replacement latch to buy? The one shown looks different than mine.

I have a multipoint mortise sliding glass door lock that is broken. What specs need to match when I order a replacement? Thank you if you see my question and can respond.

Thank you ❤

@StatUpBox

7 ай бұрын

You're welcome 😊

Awesome video - was able to switch out my door handle and latch in no time

@StatUpBox

Жыл бұрын

Awesome 😊👍

Appreciate the vid,but what do you do when one of the main screws won’t come out? I keep trying to unscrew it but the flat part from the outside of the door just keeps spinning so I can’t remove it

How do you like up the key lock part so itales the inside part work?

Awesome!!! Please keep me laughing!

@StatUpBox

2 ай бұрын

😊👍

Great Video, I now know that I can do it lol

@StatUpBox

Ай бұрын

You can do it!💪😊👍

That's funny I did "wake up" this morning and was like wtf

I should have watched this videos before I attempted to fix my sliding door alone. I dropped the old latch inside the door stile 💀

@purvinpatel3010

14 күн бұрын

Hey how do you get it out?

@monimayra16123

14 күн бұрын

@@purvinpatel3010 I didn’t it’s still in there 😬. I just installed the new one and made sure to hold like in this video for it wouldn’t fall in too. Sure I would have to remove whole door to get latch out 😅

@socalspade21

8 күн бұрын

@@monimayra16123it’s in there as a spare right? lol

@heytheremr2

Күн бұрын

@@monimayra16123 where’d you buy the replacement? 😅😅😅😅

@monimayra16123

Күн бұрын

@@socalspade21 you know it 😂😂

What I want to do is replace the non-locking handle mechanism with a locking type. I purchased a kit that looks almost identical to what I have now with the exception that it has a keyed lock on the outside. But... when trying to install it, the slot inside the mechanism can accept either the shaft of the latch or that of the outside lock, but not both. How does one deal with this?

My mortise lock seems like its stuck inside the frame. Any tips on how to wiggle it out?

anyone know the exact model of this specific lock and handle

I would use Vice-Grips to hold the latch.

@StatUpBox

8 ай бұрын

Good tip

Cant find the exact mortise lock replacement

This was funny and educational grasshoppers 😂

@StatUpBox

Жыл бұрын

🤣😂😊👍❤️

How often do people install that lock upside down with the little claw pointing downward? I recently discovered that my little claw was pointing down instead of up, which means that when the door is locked, you can simply lift the handle side of the door up a couple inches and the door slides right open. Scary. My door was like this for a couple years. Thank God we’re in a good neighborhood!

Came to this video because mine did fall down inside the frame...What do I do to get it out? Just leave it in there or what? Thank you.

@StatUpBox

Ай бұрын

magnet does the trick. link in description

What is part number of this sliding door lock? Pl let me know

good video but you didn't address what to do when you didn't see this first and your lockset slid down to bottom. Or how do you know which lockset to get?

@livenotonevil8279

2 ай бұрын

Probably remove the door and work it back

Excellent commentary 😂

@StatUpBox

Жыл бұрын

😂😊👍

i love you

@StatUpBox

Жыл бұрын

😊👍❤

@karentilley4356

Жыл бұрын

Mahalo for this. This is so helpful to humankind

@StatUpBox

Жыл бұрын

thanks. you are welcome. 😊👍

Great video and great tips but the guy's voice sounds like a roller coaster. Every sentence starts in a high pitch and then ends in a low pitch. Other than that, GREAT VIDEO!

.hausmann sliding door luck

Where do I get the big magnetic

@StatUpBox

Жыл бұрын

Link in description. Here is the link amzn.to/3lfCiDl

Where did you get the magnet at?

@StatUpBox

Жыл бұрын

Link in description

My lock stays in the locked position. 🥴

So my latch feel down the unforbidden track how do i get it back out 😂

Please show the magnet catching the lock as it falls. I'm skeptical.

@StatUpBox

Жыл бұрын

Lol. It's a 500lb magnet. It has saved us at many jobs. 👍😊😂

I can't get my lock assembly to come out. There is very little play up or down

@gary501

Жыл бұрын

Mins also. How did you get it out?

@LoebRules

Жыл бұрын

@@gary501 i put a little lubricant in there, pushed it up and i was able to pull it out with some pliers

@gary501

Жыл бұрын

@@LoebRules cool thanks

@LoebRules

Жыл бұрын

@@gary501 Good luck!!

Somehow, I can’t get the old one out because the opening is smaller than the old latch. I also measured the new one against the opening, the hole/opening is smaller also. It does not make any sense for the designer of the door. I am going to use a plier to grab the old one and force it out. I assume if the old one comes out, the new one will get in. Any idea?😂

This thing was hilarious and helpful but I gotta ask, why is the tint on the door sooo bad, did Steve wonder cut that thing. Lol

@StatUpBox

Жыл бұрын

😂🤣😭😭

You didn't add the lock part.

Wait what was the point of the magnet

@StatUpBox

10 ай бұрын

Help prevent old lock from falling in door frame

The latch won't slide into the hole! I can't believe this! The part I got doesn't fit properly! And hammering on it to try to get it in there only seemed to make it worse and break the latch!

@EJLEJ_2014

11 ай бұрын

Mine won’t latch to lock either and the handle is hard to move up and down. Wonder if I get a whole new set instead of just the latch. But I’d have to match the holes to the old one, might just be a bigger hassle.

My door is locked and cannot get to the latch? Is it smart to call a door specialist??

I could hear this dude read all day long….

@StatUpBox

11 ай бұрын

😊❤️

an ice cold.

Now for a real repair. How does one open a sliding door in the closed position with a broken latch? There is no wiggle room, laterally or vertically.

@jaycee1373

Жыл бұрын

I’d start by removing the handles, and try to access the mechanism that way. Maybe to the point of drilling out parts of it until the catch drops out of the slot.

It's not clear from this video whether the old latch was put back in or a new one was installed. I watched several times and it's not clear ..

Watched this video AFTER attempting to unscrew the latch. Aaaand the latch fell right through the door… Not a happy grasshopper 🤦🏾‍♂️

If I accidentally drop the new latch inside, how do I get it out? Lol

@StatUpBox

Жыл бұрын

Magnet link in description of video

@vernonsteinkamp1088

Жыл бұрын

Vise grips on the hook will work.

😂 subbed!!

@StatUpBox

9 ай бұрын

Awesome ❤️😊

Accidentally removed the handle without using a lock and now it wont unlock

Thanks!

@StatUpBox

11 ай бұрын

Welcome!