How to Replace Shifter Lever 1997-2003 Ford F-150
Автокөліктер мен көлік құралдары
Buy Now!
New Shifter Lever from 1AAuto.com 1aau.to/ib/FDTSR00015
This video shows you how to install a shifter lever on your 1997-2003 Ford F-150. A broken, stuck, or otherwise problematic shifter could cause dangerous shifting problems while driving, or leave your vehicle stranded!
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• Phillips Head Screwdriver 1aau.to/o9R/1AXAA00013
• Pocket Screwdriver
• Hammer 1aau.to/otq/1AXAA00091
• Pick 1aau.to/oph/1AXAA00037
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 17
One recommendation... before pulling the wire out, tape a wire or string to the plug end. This way you'll be able to tape it to the new connector and pull it back the other way so itll be in the same route as the old one. ... I used to work as a car stereo installer. There were many times we had to fish wire through the dash. It was the easiest using the old wires as a guide for the new wire to be installed.
@TRQ
5 ай бұрын
+@kenito7257 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Great instructions! I followed your video to the tee and Mission Accomplished! I use to love working on my car in high school but I have been a high school teacher for almost 28 years. I will certainly come to your channel for other simple repairs and replacement!
Thank you I just did it on my 1999 F150 and it worked great !! while at it I also cleaned all the plastic covers😅
Thank you for this Video... it made the job so much easier knowing exactly how to do it right down to the clips.
Thank you for all this information. But I lost my keys how can I do this job with out the keys to my truck?
That tilt lever his almost never loosen enough to do it by hand
Why did you change it cause mine if not in p all the way up it doesn't start
Thank you very helpful
Thanks, great job 👍 simplicity is the name of the game 🤩. Gotta get mine done real soon. I have a 2002 Ford F-150..... Ok, thanks again Angie from Charlotte NC
Will this help my truck it’s stuck in park and won’t budge to drive or anything
Interesting video
thank you
Why all the unplugging if wires?
Do you have to turn off the airbag?
I did this and now my truck will not start
Why do you have to unplug the 2 plugs underneath?