“You’ll just have to remove” *takes apart the whole phone

@cindyrios2406

4 жыл бұрын

😂🤣😂🤣

@thesouthamerican.2282

5 ай бұрын

Apple crap

This video confirmed I’m taking my phone to the repair shop.

@loidmaranon6042

Жыл бұрын

Yeah this is not an easy job. 1 wrong move can damaged the board or LCD

You don't have to remove the battery! It's enough to loose and lift the bottom part of the battery only. You'll need a plastic pick and a heat gun again. Besides, this video doesn't show how to remove the battery. Also, there is no need to remove the top face recognition piece. It can stay. So, lots of unnecessary dis-assembly. However, still, this is a very helpful tutorial. This guy has an excellent detailed video how to remove the screen/digitizer as well.

Beware! There are lots of step that he skips when re-assembling the lower half of the phone. (not to mention he completely skips the need to remove the adhesive to remove the battery). I would NOT use this video if you are a beginner.

@saudiprince6532

3 жыл бұрын

Cheers Dave

@benjaminfranklin2408

3 жыл бұрын

Okay karen

@chrisa1161

3 жыл бұрын

Thanks Dave, but you just need to heat the phone so that the adhesive is not as sticky. Be careful not to puncture or rip the battery!

@twinfrmda7

2 жыл бұрын

@@benjaminfranklin2408 you calling them karen when yo phone broke you gon be looking dumb

@loidmaranon6042

Жыл бұрын

You’re right sir. I am a legit technician and there’s so much to learn before following this tutorial else it will cost people a lot of money especially if the motherboard will be shorted due to battery improper removal

Very gently, carefully. Be very careful the cable is thin. *Aggressively pulls the cable with bare hands*

I've done a lot of iPhone repair work and this is by far the most involved project. My charging port is struggling, but not completely broken, so I'm going to wait on this one. Nice job on the video!

Just FYI to all who try, the battery is held down by adhesive. It DOES NOT come out remotely close to the level of ease this video shows.

@jahmo0

4 жыл бұрын

And he used a metal tool to pry it out, someone is gonna watch this and start a fire .. smh

@johntheone7669

4 жыл бұрын

It took me 40 minutes just for the battery lol

@jayallan7885

2 жыл бұрын

need a little rubbing alcohol under the battery to soften the tape......then dry it completely before starting the phone

Thank you so much I appreciate you doing the video in reverse you're a king

Awesome Video. I followed step by step and took my time. Thank you.

Thanks for the tutorial, that hat did get in the way a couple of times😂

Pro tip: use an ice cube tray for parts. Don't go criss cross, go from one side to the other in a straight line. Place all the parts of each component in the pocket, don't separate covers, part and screws. Then just start from the back on reassembly. This will save you a lot of mental space.

Man I’m already lost. Too many unscrews and disconnects 🤦🏽‍♀️ I don’t think I want to replace the charger port by myself anymore lol

@loidmaranon6042

Жыл бұрын

😂 you’re right

Hi, thank you for the video. At 6:05 you used a flat head screwdriver. What is the type of that screw ? Is there a more convenient screwdriver that can be used for that type of screws ? Thanks 👍

Very helpful video however, I wasn't able to solve the issue with my iPhone X only being able to charge when it's turned off. I replaced the battery as well as charging port but it didn't help with the problem. Probably something is wrong in the motherboard.

one of my flat head screws is stripped, what should i do to get it out?

Excellent content. I can see you know what you are doing.

You can run the flex cable on top of the motherboard and avoid a lot of these steps. Sure it’s not pretty but it works and that’s what matters.

Hi all, what's the black paper like stuff on the inside bottom cover the battery sits on? little bit scrapped off.

great video !

Do you need to program the port? Because when I put the new port in my phone was laggy and would bootlop.

How come that at the beginning the iphone shows 7:59 and at the end 7:04? 12 hours to replace?

With every "and next up" my courage dropped. After the 5th I realized that it's going to be a new phone for me..... :(

Does the charging port feature the network chip?

Awesome tutorial

@SergTech

3 жыл бұрын

Thank you! Cheers!

This was a great tutorial keep these videos going !

I have one of these to do at work tomorrow, I'm not sure whether this video has made me feel better or worse about it, it looks so hard!!

Welp!!!! Looks like I'm getting a new phone!

@emperorfloch

4 жыл бұрын

😂😂😂

@DD-vz7ci

3 жыл бұрын

@@emperorfloch All hail emperor floch✊

@latafairam

3 жыл бұрын

Exactly

What would you charge me to replace charging port and speaker ?

Pls sorry for asking Can someone tell me the name of the tool his using to remove the screen 🙏🏾🙏🏾🙏🏾

Bruv, that took a fat minute, thank you though! 👍🏻

Your website is not working anymore, I cannot access the tool kit link.

Can you use a charging port from a iPhone 6s ?

HI, I changed the charging flex on iPhone X. After that my mobile's google map is not working properly. It's working too slow and the blue indicator arrow is moving too slow it doesn't move with me while driving and stopped to do re-routing if I choose another street. Please help me.

Thank you

Would this fix my face id and make it start working again?

does it affect IP67 water resistance?

when you take out screws your don’t seem to need to have to keep track of them for reassembly - but since they are lots of sizes I would think it would be important to keep them organized. How do you suggest a for a non-pro so you know you’re not putting a long screw when a short one goes? thanks

@MohammadAli-yh1mw

2 жыл бұрын

buy a tray with different sections. thats what i do.

What is the name of the shield/flex cable at 5:58 and what is its function? Thank you in advance!

@maguinalejandro8036

2 жыл бұрын

It's the GSM/cellular signal antenna.

the akku so easy going out?

That’s too much to do!! Just for the charger port wtf

@peytonbullock4939

5 жыл бұрын

Karmen Loveee They pack so much tech into phones these days I’m not surprised it takes about 35 minutes for an experienced person to replace the charging port.

@Jojohumf

4 жыл бұрын

They do it on purpose so people can’t repair their own phones like we used to be able to, they layer it in a way that’s makes it’s very difficult to replace the charging port

@warriorjust

4 жыл бұрын

Yeah right!

Charger port not connected. wireless charging used charger yes are no

holy shit, that’s so much work, just to replace the charging port, my iphone 5, 5s and x all suffer from the same problem, loose charging port, and i feel like replacing it is too much hasle, so i’m just gonna replace my phone when it dies next iphone i want type c port, in screen touch id, remove notch, please apple

Hello , what doing this bracket from 5:55?

The title should be "how to dismantle an iphone x 😂

+i appreciate your instructions! however you made me remove the speaker AREA 3 TIMES LOL you skipped installing all 3 large screws

After doing this , my mobile is not charging, please help mee , what to do

Yes cause everyone's got a hot plate

@tbc1_slava807

2 жыл бұрын

you can use heatgun or hot iron as well altho or 3d printer heated bed. dont reccomentd the hot iron tho

@jayallan7885

2 жыл бұрын

been repairing iphones for years.....never had to use heat on one...except to loosen a flex, never to remove a screen.......

@johnjoseph661

2 жыл бұрын

@@jayallan7885 all you need is a blade eh? 😁

@jayallan7885

2 жыл бұрын

@@johnjoseph661 just a pentalobe and very thin piece of steel.....

That Iphone has been opened before.

@jmander82

4 жыл бұрын

They always pre-teardown phones. Tutorials would take so much longer and not be as effective if you had to watch them open and remove everything for the first time. It's just for efficiency

Will this work if I have a broken pin in the charger area?

@hunterrichardson3845

4 жыл бұрын

Yes

Just replaced my charger port but now my phone won’t connect to WiFi? Any idea on how to fix this?

That was a great job you did with the Iphone 10, of course you have to have a bit of electronics back ground, is good to mention that you have to ground your self, because of the static on your body.

@KipdoesStuff

3 жыл бұрын

YOu need absolutely no electronic background. a better video than this one would help though.

What temperature should the hot air gun be while using ?

@altielmaltiel6238

2 жыл бұрын

80 C

You can’t just use an adapter?

The room for error on this repair is enormous. wireless charger is the option, forget the headphone option.

@KipdoesStuff

3 жыл бұрын

It is actually relatively easy, this guy makes it harder.

@JohnnyK1

3 жыл бұрын

@@KipdoesStuff I felt like a surgeon for over 2 hours of work.

@josephstarkey5773

Жыл бұрын

How do you save ur pictures

What happens if I damage the black thin layer behind the charging port? Can I replace that part? What is that part called?

@dylanpettway8975

Жыл бұрын

EMI Ground connector yes you can replace this

I thought my charging port was damaged but it was full with lint. I used a tooth pick and rubbing alcohol to clean it.

@jorgesaavedra9938

4 жыл бұрын

Thank you for publishing this. Your comment resolved my problem

@Pod6168

4 жыл бұрын

That solved it for me. Thank you.

@Savageslash1234

4 жыл бұрын

I dont know why i didn't think of that it work for me as well

@JesusMartinezCreates

4 жыл бұрын

youre a god!

@edwinmonterroza7426

3 жыл бұрын

I will have to do that too thanks.

I like you bro

today I’ma be showing you how to change the port of your iPhone him the fixes the whole phone like it’s brand new

Good show. Fun to watch, but almost no one in their right mind would attempt this, technically gifted or not.

@KipdoesStuff

3 жыл бұрын

hundreds of these are replaced daily, lol. Its easy

@maurogonzalez2999

3 жыл бұрын

You sound uneducated

Just go to a phone store and pay $50 to get a changed cause they got the better tools better then breaking your phone and paying hundreds of dollars to fix it

@P4rkerMann

3 жыл бұрын

If only it was $50 my man. WAY more to get it replaced

@JohnnyK1

3 жыл бұрын

Apple store gave a quote of $350.

@Doc02864

2 жыл бұрын

@@JohnnyK1 called today. $650!

He did not need to do all of that for a charging port

had to do this, by-myself, after that repair, face-id dosen't work anymore I lost it, and also the whole camera system doesn't work pretty well if I turn my phone off and on the cameras turn black like no video signal and I had to do a trick with the software to make them in function. I repeat face-id doesn't work after that repair

@ben3438

3 жыл бұрын

Correction. YOUR face id doesn't work after this repair.

@matteodefrancesco5133

3 жыл бұрын

Ben Masterson yes, i know, My Face-ID dosn’t work anymore

Sembra molto facile a vederlo fare

❤❤

Moral of the story is I just need to buy a new phone instead…

My iPhone after this replacement still restarting, someone know what can be the reason? Thank u.

@Bird_Dog45

3 жыл бұрын

Try replacing battery not holding its charge

messed my battery up and punctured the black skin around batter because he did not mention anything about adhesive on the battery !

but thats not the tool kit your using doing the repair though in any of your videos

what goes on my nerve is that he doesn't screw the screws in the same order in that he unscrews the screws -.-

hack: cop a wireless charger until you get it repaired

@hunterjames7786

3 жыл бұрын

My wireless charging doesn’t work either

Is data lost during this ????

@gotababy2

4 жыл бұрын

Nope. Everything is as it was. I just did this for my phone. No issues when turned back on.

@vikasvishwakarma9232

3 жыл бұрын

no

Instead of using the flat head. Get a stand off screw driver.

I thought this was going to be like a 5 min job, ffs

@JohnnyK1

3 жыл бұрын

3 hours for the first time.

Do you even know how to put back all those screws?? Lol

nevermind.....

Why did the port fup in the first place , a joke if you ask me , i will wirless charge thanks

Shut up , From Cali ... buena parcerooooo hahahaha

So after doing this now I have a problem that after 10 mins the phone resets it self help

@BWade96

4 жыл бұрын

You ever figure this out??

@claudiamerli3217

4 жыл бұрын

you probably used a faulty replacement part, this happened to me twice with cheap parts from ebay: after the replacement the phone started to boot loop, everything worked fine for 5 minutes and then the phone started to crash.. this is a common problem i guess

humm, return to apple outlet, get a new phone. lmao

@mmaaddict78

3 жыл бұрын

That’s exactly what Apple wants you to do.

Well I’m going to pay then

I unplugged the screen while the battery was still plugged in and now the screen doesn’t work. Lol

Wtf

daat video, idon´t see the iphone man!!!

you can’t remember screws and then screwed up … 😄

Imagine replacing it and it doesn't charge😂🥶

Let’s remove all the adhesive and not replace it... I guess don’t get it wet now

Use original part, if not u will get iphone restart every 3 min syndrome

probably shouldn't have a hat on for this video. It keep covering the camera.

Just buy a wireless charger

You need to take apart the entire phone????!

Looks like the phone would get fucked up about to just buy a wireless pad

That damned cap bill sure doesn’t help a bit!

Wtf all that for a cable

@KipdoesStuff

3 жыл бұрын

Blame Apple, they try to make it impossible.

What a freaking mess.. I guess it’s time for a new phone 😅😅😅

Apple makes repair annoying.

why didn't you mention using the pull tabs for removing the battery adhesive? i saw a minor puff of smoke and am pretty certain i punctured the battery. now i have to replace the battery! the video was awesome, but i have to give it a thumbs down. i could have set my house on fire.