How to replace RELOAD STRING on RYOBI 40V trimmer
Тәжірибелік нұсқаулар және стиль
Works on 18V and GAS, too! See how fast you can replace / reload the cutting string line on your Ryobi weedeater.
Pre-wound Ryobi-brand spools: amzn.to/44E23yf (paid link)
Large roll of string: amzn.to/3PpBoRp (paid link)
Пікірлер: 44
And here I've been fighting for a half hour to try and get the trim head apart to restring it...thanks so much for this! That should be in the manual!
@FixEverythingYourself
Жыл бұрын
Great!
Thanks for the demos. I think the most important part for me when loading the string was to tug the two ends snug after every few turns to keep the string from twisting up and not feeding. Good demo. Easy to follow. You made my day !!
@FixEverythingYourself
Жыл бұрын
Glad to hear it! And thanks for the input on what tips work best for you.
Thank you for this. I swear the instructions don't even tell me this and I wasted an hour earlier in the baking sun trying to get this back together.
Great instructions-simple and straight forward. Thank you!
@FixEverythingYourself
8 күн бұрын
Thanks!
nice and concise. thank you for not adding fluff
@FixEverythingYourself
3 күн бұрын
Thanks 👍
Thanks so much! I had the whole thing apart and your way was so simple!
@FixEverythingYourself
Жыл бұрын
Glad this helped!
thanks I wasn't pulling on the string every few turns so it wouldn't lock up and would just unravel when I turned it on. been fighting this war for a week straight lol
@FixEverythingYourself
Ай бұрын
😁👍
Thanks for getting straight to the point and clarity. Appreciate the post!
@FixEverythingYourself
Жыл бұрын
Thanks!
easy and simple ,couldnt figure it out, you made my life must simple ,goo job explaining it and cut and dry ...
@FixEverythingYourself
Жыл бұрын
Thanks! Glad I could help!
Easy to follow! Newly widowed and trying to figure things out!
@FixEverythingYourself
Ай бұрын
Glad this helped 🙂👍
This is excellent. Another, site had me taking the whold thing apart. Good gawd.
@FixEverythingYourself
16 күн бұрын
🙂👍
i needed this. i just got her put together and no instructions for installing. Thank you!!!
@FixEverythingYourself
2 ай бұрын
Great! Thanks!
Wow! Thanks so much!! This was so helpful! I have to admit my dad had always changed my spool when it needed it and it felt pretty good to do it on my own. I think my wife was impressed too….ok maybe not.
@FixEverythingYourself
3 ай бұрын
Good job! It does feel good to do things yourself. Keep it up!
Thank you for the demo... I cant begin to explain how much I fucking hate this reload system and the string trimmer as a whole, but it was free so im going to run it to thw ground.
@FixEverythingYourself
3 ай бұрын
I hear ya. It's not my favorite, either, but sure of them are easy and others are a pain (same exact head type).
Thanks buddy!
@FixEverythingYourself
Жыл бұрын
YW!
By what black arts have you made this eternally coiled line to pass straight through a straight tunnel? A spell? A magic snake charming flute? If I hadn't seen it done I would assume Ryobi made this as a throw away one and done product.
@FixEverythingYourself
Ай бұрын
That problem isn't unique to this trimmer. Yes, it can be a bear. Best advice is to straighten the first few inches of string as much as possible to enable it to pass through. Otherwise, it's hard. Other trick is to twist the string a little bit while feeding it through. This gets the string inside to move around and "look" for the hole.
What's the best way to do this if you can see the arrows due to use? I've tried to turn it every which way and the string won't come through to the other side.
@FixEverythingYourself
4 ай бұрын
The arrows on the grey head are exactly aligned with the holes that the string comes out. The arrows on the knob you have to turn are aligned with the long groove that runs across the knob. Does that work?
Whenever I do this... it goes just like you're showing.. but when I turn on the weedeater all the string comes out both sides.
@FixEverythingYourself
5 ай бұрын
Most likely cause is winding the string the wrong direction (backwards) on the spool. Pay attention to which direction I'm winding it and make sure you're doing that. But if for some reason that isn't working, do it the opposite way you're doing it.
What model is this? I've had it with my old one who's string is too hard to replace. I have some 40v batteries already for my mower so I figured best to just get a 40V trimmer.
@FixEverythingYourself
10 ай бұрын
The model number if you search the Home Depot website is RY40250.
@CMLee81
10 ай бұрын
Awesome! I'm ordering it today. Can't get the tool only in store. Thanks! I'll see what other videos you have that might help me out with things!
@FixEverythingYourself
10 ай бұрын
Great! Good luck with it!
man mine is not tightening when I turn my knob, could it be broken!?
@FixEverythingYourself
2 ай бұрын
May just need to be cleaned out on the inside. After a while a lot of dirt and grass gets in there and can make it hard to turn.
Two wee
Thank you for this tutorial. The Ryobi user manual is atrocious. The illustrations are for a model that is different than the actual trimmer. Additionally it is so poorly written. Useless!
@FixEverythingYourself
11 ай бұрын
You're welcome. And agreed, the manual isn't good. That's true of most weedeaters for some reason.