How to Replace Rear Wheel Hub Bearing 2013-19 Ford Police Interceptor Utility
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00480
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2013-19 Ford Police Interceptor Utility.
• Check here for more videos on the 2013-19 Ford Police Interceptor Utility: • Ford Police Intercepto...
This process should be similar on the following vehicles:
2013 Ford Police Interceptor Utility
2014 Ford Police Interceptor Utility
2015 Ford Police Interceptor Utility
2016 Ford Police Interceptor Utility
2017 Ford Police Interceptor Utility
2018 Ford Police Interceptor Utility
2019 Ford Police Interceptor Utility
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 15mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• 32mm Socket 1aau.to/oa/1AAST00003
• 8mm Socket 1aau.to/oa/1AXAA00017
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• T40 Socket
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXAA00078
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXSS00035
• Copper Anti-Seize
• Sandpaper
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Ford Police Interceptor Utility: • Ford Police Intercepto...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 18
√
By the look of that hub, he was wailing on it for a few hours before he restarted the camera.
THAT man is a professional.
Right..he beat the shot out of that hib before it came out
So you see the two missing wheel studs @
Great video always. Though I am not doing it myself I love to know how it is done. So I know when the mechanic is trying to put wool over my eyes thanks again.
I have replaced alot of these and none of them have ever come out that easy.
Such a well done video with clarity, good video capture and all conversation was helpful information.
‼️Good job
I call bs. Never come out with little hammer blows.
those are always seized in.
Why not tell use how you really did it,hahaha,this is joke