How to Replace Rear Wheel Bearing & Hub Assembly 2015-2019 Hyundai Sonata

Автокөліктер мен көлік құралдары

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00621
This video shows you how to install a new wheel hub and bearing on your 2015-2019 Hyundai Sonata. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa35/1AXAA00013
• Pry Bar 1aau.to/oJd/1AXAA00020
• 10mm Socket 1aau.to/oaMR/1AXAA00017
• 14mm Socket 1aau.to/oa5b/1AXAA00015
• 21mm Socket 1aau.to/o3d/1AXAA00043
• Air Compressor
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/o3/1AXAA00289
• Brake Caliper Hanger 1aau.to/ogL/1AXAA00084
• Trim Tool Set 1aau.to/oVB/1AXXX00006
• 1/2 Inch Impact Gun 1aau.to/onG/1AXAA00252
• Ratchet 1aau.to/obgu/1AXAA00016
• Torque Wrench 1aau.to/oane/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oxm/1AXSS00035
• Copper Anti-Seize
• Gloves 1aau.to/oAu/1AXSS00048
• Floor Jack 1aau.to/oQF/1AXAA00068
• Jack Stands 1aau.to/oLD/1AXAA00065
• Pick 1aau.to/oEB/1AXAA00037
• Rubber Mallet 1aau.to/ofk/1AXAA00413
• Sledge Hammer 1aau.to/oLG/1AXAA00091
• Wire Brush 1aau.to/op3/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 7

  • @TRQ
    @TRQ Жыл бұрын

    √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

  • @paulwilliams8056
    @paulwilliams8056 Жыл бұрын

    Thanks so much for putting this out there!!!! Saved me several hundred dollars possibly at the dealership. My hub was frozen like this one and no one else had a video with how to handle it. Bought the hub with wheel sensor on Amazon for around 60$ and was done!

  • @ramonayre4668
    @ramonayre46682 ай бұрын

    Great, detailed video! Could a slide hammer be used to pull the hub/bearing out (after removing the 4 bolts) instead of removing the parking brake/backing plate assembly?

  • @suelopez3172
    @suelopez31728 ай бұрын

    Great video!👍👍

  • @salembeeman370
    @salembeeman37010 ай бұрын

    Do you often do both sides? Is there a problem with new pads and rotor on one side but not the other?

  • @patrickjordan7670
    @patrickjordan7670Ай бұрын

    That hyundai hasn't been on the road for a long time brake disks very rusty

  • @traycee1026
    @traycee102611 ай бұрын

    What if the pads are not rusted to the hardware? Guess I have to watch a separate video for that?

Келесі