Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ib/1ASRU00023
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle. This video shows you how to install new control arms in your 2007-12 Dodge Caliber.
• Check here for more videos on the 2007-2012 Dodge Caliber kzread.info/head/PLJVpHWuCEUX-DQEst2CX6QjJc__wtEVdA
This process should be similar on the following vehicles:
2007 Dodge Caliber
2008 Dodge Caliber
2009 Dodge Caliber
2010 Dodge Caliber
2011 Dodge Caliber
2012 Dodge Caliber
Tools you will need:
• 18mm Wrench
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• 3/8 Inch Air Impact Gun
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Center Punch 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
Subscribe: kzread.info/dron/WCdsftsTqYMO7cA_5Sc-yA.html
Check out our playlist:
Dodger Caliber 2007-2012 1st Generation: kzread.info/head/PLJVpHWuCEUX-DQEst2CX6QjJc__wtEVdA
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.