Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com 1aau.to/ia/1ABES00290
This video shows you how to install new rear ABS sensors from TRQ on your 2006-2012 Ford Fusion. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.
This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obAM/1AXAA00013
• 10mm Socket 1aau.to/obx7/1AXAA00017
• 13mm Socket 1aau.to/obUT/1AXAA00015
• 19mm Socket 1aau.to/oaxV/1AXAA00043
• 8mm Socket 1aau.to/obx7/1AXAA00017
• Pliers
• Ratchet 1aau.to/obXP/1AXAA00016
• Socket Extensions 1aau.to/obUT/1AXAA00015
• Torque Wrench 1aau.to/oa2F/1AXAA00044
• Cloth Rags 1aau.to/oKi/1AXSS00035
• Gloves 1aau.to/oaLH/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Floor Jack 1aau.to/oapM/1AXAA00068
• Jack Stands 1aau.to/oab5/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.