How to Replace Parking Brake Shoes 2004-2010 BMW X3
Автокөліктер мен көлік құралдары
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/247/n/brake-hardware
This video will show you how to install new parking brake shoes on your 2004-2010 BMW X3. For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes.
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oqS/1AXAA00013
• Pry Bar 1aau.to/oeN/1AXAA00020
• 16mm Socket 1aau.to/oqV/1AXAA00015
• 17mm Socket 1aau.to/oqV/1AXAA00015
• 7mm Socket 1aau.to/ood/1AXAA00017
• Brake Caliper Hanger 1aau.to/oaj/1AXAA00084
• Locking Pliers 1aau.to/oaH/1AXAA00139
• Needle nose pliers 1aau.to/ocA/1AXAA00051
• Needle nose pliers 1aau.to/ocA/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/obi/1AXAA00078
• Ratchet 1aau.to/osh/1AXAA00016
• Torque Wrench 1aau.to/okh/1AXAA00044
• Drill
• 5mm Hex Wrench
• 7mm Hex Socket
Subscribe: / @trq
Check out our playlist:
BMW X3 2004-10 1st Gen E83: • BMW X3 2004-10 1st Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 5
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
forgot to clip back brake line at the back but yeah, good job.
Appreciate the effort in making the video. However, at min 10:37 you said "Now you can go and check the pedal". As you are aware, the pedal does not operate the handbrake shoes. The Calipers were still sitting in the wheel well!! Take your time, people are using these vids to learn from you. Like Bruce mentioned, "What about the cable adjustment."
It may not matter a lot but you reinstalled the adjuster "star" in the opposite orientation of how it came out, so the usual adjustment procedure will be reversed.
Very good 👍