Excellent, no messing about video. Thanks

Merci, j’ai eu le problème grâce à cette vidéo j’ai pu résoudre le problème sur ma E207 cabriolet mercedes merci bien 😊😊😊😊😊😊😊😊

The hardest part is getting the screws back in while holding the lever out while trying not to pop the mechanism out

Thank god you posted this !

Thank you very much!! It's been so helpful to me.

Super wideo danke😊

Helloo, what if that grey wire snaped is the procedure more difficult or I can replace it myself?

After removing the two torx screws and I pull out the lever there is hardly any play in it and it comes out half of what yours did. Is there a simpler way to get more slack so I can have enough room to get the cable out of the broken piece..

Thanks for explaining, is it similar with W124?

Thanks a lot.

I carbon fiber my whole inside jus want to change pulling break I have carbon fiber 1 will this help

How do you get to the cable if it went in?

Can you link the video that you mentioned towards the end, regarding the E Brake and why they fail.

I just applied my emergency brake and i heard a click and my handle popped out of the dash. It not going in anymore and the emergency brake won’t hold no more. Any possibilities ?

Hi. I was stupid enough to press my P-brake during -15°C and something happened since the wire on the release handle jumped out and the handle itself. Now the P-brake wont engage on +7°C (i only did the 3 clicks with the hand) i mounted back the wire in to the release handle and it just stays pulled out. There is slight resistance on the wire so i guess it did not detach or jump off where it sits. What could have happened? Should i tried pressing the p-brake harder with my leg?

Hi, do you know which size torx screwdriver you needed? I used t10 and t15 but they were too small.

hi my issue is the handle is loose now. is the cable supposed to be behind the hook inside the dash?

Any link to that part?

people don't use the park brake? so what, they let the entire weight of the car rest on the gearbox while it is in P ?? that can't be good for the gearbox.