Thanks for watching please *LIKE & SUBSCRIBE* - Volt meter: amzn.to/3lIYyQA - Volt detector pen: amzn.to/3ggLOQ8 - Thrunite Flashlight: amzn.to/37B3cLn

@joeygibbs4775

3 жыл бұрын

For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. begotten Son, that whosoever believeth in him should not perish, but have everlasting life.“Then Peter said unto them, Repent, and be baptized every one of you in the name of Jesus Christ for the remission of sins, and ye shall receive the gift of the Holy Ghost".

@ThruNite

3 жыл бұрын

The video is really helpful : )

@thecommonsenseconservative5576

3 жыл бұрын

Unlike these dumb foreigners commenting I am actually American and I have a question. My panel and breakers are from 1987. I can't find the exact same breaker design from Bryant. Any suggestions. It's a BR 1515

@Ru4444

2 жыл бұрын

Can u do it without turning off the main breaker? Thank you

@SilverCymbal

2 жыл бұрын

@@Ru4444 I would not recommend leaving it on.

I am a 74 year old woman on a fixed income so I have to do as many things myself as I can. My circuit breaker for my microwave went bad and needed to be replaced. I watched several videos on KZread to learn how I could replace this myself. Of all the videos I watched, this video explained and demonstrated the process the clearest, in as few words as possible and still get the point across, so that I understood and felt confident I could do this myself. Thank you for your valuable assistance!

@mdelong6989

Жыл бұрын

If you happen to be in the Detroit metro area (which is very unlikely) I'd love to help you with anything you need.

@B_COOPER

Жыл бұрын

@@mdelong6989 simp alert

@fettyguapo

Жыл бұрын

@@B_COOPER lame ass

@windsofmarchjourneyperrytr2823

Жыл бұрын

Ohhh, don't go there. That magnetron is NOT to be messed with. Some people wire these up to burn wood and make art. Problem? When you modify the magnetron, there's no limit to the power, if I'm not mistaken. It's NOT going to shut off or overload if you get in the way to ground. Several people died doing this, btw. Magnetron is no joke. Plus some old tvs for example, hold power for days.

@EuphoricLabyrinth

Жыл бұрын

?? What if it’s the wrong gauge wire?! Idk, be careful. 20 amp requires a 12 gauge wire I believe, 15, idk 13-14 gauge. 🤷🏽‍♀️. Good luck!

As a service electrician I can say you got most of the details in this video. But one very important step you left out was that when putting the heavy panel cover back on or taking it off. You have to be 100% committed to holding the panel cover steady,if it slips and it crosses the live wires you’re in for a lot of pain if you survive the blast.

@encyclical

2 жыл бұрын

Good point. I just checked mine. It has been divided into a 1/3 sized panel covering the main breakers and then 2/3 for just the regular breaker area. Probably for just that reason..

@juggalosquad5027

Жыл бұрын

Does it still have power if you shut it off at the box outside?

@hollypatrick1050

Жыл бұрын

@@juggalosquad5027 yes 2:50 outside power is on, inside is off

@elvismanrocks

Жыл бұрын

🤔Very good point right there!👍

@crissy3129

Жыл бұрын

@@juggalosquad5027 I wouldn't think so, because in this case you're pulling the power from the street not just tripping the main fuse. If I were to go out and take out the main fuse that feeds into my home as a whole then there is no power coming into my box at all. If you're talking about something similar then I'm sure you could cut the main power to your house from the street as well.

Worked exactly as shared. Took less than 5 min to actually do (after procrastinating for weeks for fear of killing myself). 🙏🏻

@luisgiraldo9947

25 күн бұрын

Im in the same boat brother but im stuck in the procrastination for fear of killing myself

This has to be the smartest, and most clearly explained video I have seen on changing a breaker in your house. Thank you for taking the time to not only share your knowledge, but actually showed the entire process. That painter’s tape trick made a lot of sense, and again, many thanks.

I have checked numerous videos and you are the only person who demonstrates how the wire is properly inserted into the breaker. No one else shows this crucial step. Thank you.

@Eastbaypisces

10 ай бұрын

Seriously

Absolutely best DIY video ever. No hype. No elementary prologue. Super practical step by step. Awesome!

Thank you for just explaining the process. Nobody needs you to introduce yourself or ask us to subscribe to your channel, especially at the start. Perfect factual explanation.

Man great video. No 10 minutes of blabbering about bs, short straight to the point with a lot of information and most important of all safety. Thanks a lot I feel confident to swap some out on my own

OMG, I'm a terrible handyperson, but even I can do this. That was the best how-to video I've ever seen!

Excellent video. You took the time to explain things that other DIYers might assume people might already know. This is how to shoot helpful and idiot-proof instructions!

One suggestion is to leave the wire in the breaker. As long as the wire is not tangled up with other wires it will help hold the breaker after you remove it. Then you can remove the wire, grab your new breaker, install the wire in the new breaker, and then install the new breaker in the panel. This gives you a better view of the nut to make sure you install the wire(s) correctly between the tabs. I also use a small brush and put dielectric grease on the panel tabs, the breaker contacts, and the nut. You'll need the corrosion protection if you're installation is in an outdoor panel.

@WildManDanWMD

5 ай бұрын

Check for grease in New Breaker. Confirm it's inserted correctly

The most straightforward and easy video one could ever want. Awesome job!

Super video.... In 1986 I vaporized my long pincers on the 'substation side' of my distribution board ..240 volts...UK... I was left holding the insulated handles only...the pliers had blown up and steel was peppering the walls.. So remember that even with the main breaker off, there are still big live wires when you get the panel front off...

This is an amazing video. I have very little electrical experience and this taught me everything that I needed. Replaced a breaker this evening after watching this last night and taking a trip to the hardware store today. Kudos to you, SilverCymbal. Excellent job.

Excellent tutorial. No fluff, not a single distraction. Thanks.

Super clear and to the point without unnecessary comment. I love that! I feel totally confident now. Thanks!

Thank you for sharing this information. I just changed a breaker myself and am feeling like a boss.

@spartt4360

3 жыл бұрын

Gongrats, now get insurance for your house

@bertharuiz1225

3 жыл бұрын

Good for you! I’m still not sure how plus panel cover too heavy!

@trvman1

2 жыл бұрын

and an electrician would charge at least $85.00 if you were lucky.

@PedroGarcia-zf8zg

2 жыл бұрын

@@spartt4360 😂😂😂

@victorugo2654

2 жыл бұрын

😅😳😳😳

Also before sticking your screwdriver on the terminal verify that there's no power on the breaker. And, a voltage tracer is not a substitute for a meter (ever). Voltage testers can be sensitive and subject to stray voltage alarms. Use the meter to make sure the power is off.

@paulgarcia1566

3 жыл бұрын

But how do I do that? What settings should the meter be at?

@joefisher4630

3 жыл бұрын

Learn how to use meter. Got to be smarter than your tools.

@staytight6340

3 жыл бұрын

A working black man bravo

@jeremyanderson3819

3 жыл бұрын

@@paulgarcia1566 I am sure there is a youtube video on that.

@spencercohen1577

3 жыл бұрын

@shawn t..... that's a fact

Thank you so very much for posting this. I discovered a bad breaker the other day and your tutorial was perfect to help me do the job. The new switch is now installed and everything back to normal.

@CarlosGarcia-ls4hn

Жыл бұрын

Can you please tell me how you determined the breaker was bad? Did it keep tripping?

@cathywells5065

Жыл бұрын

@Carlos Garcia it's been a while But I believe I kept moving breakers to a circuit I was positive was good and isolated the bad breaker.

Excellent instructions! Every step covered. No missed steps as in so many of these instructional videos.

In my personal experience I wouldn't recommend the non-contact voltage testers. I am a master electrician and have been in the electrical business for 20 years. I have lost count how many times those testers do not show voltage when it is actually a live circuit. I've also seen it show voltage when there actually isn't. The safest way to know for sure is with a voltage multi-meter that has been tested on a known live circuit. The biggest problem with electricity is not knowing how it works

@WiPri0371

3 жыл бұрын

Best example : I went to a home with an issue at the light switch. From what the homeowner told me, I told him you're probably getting a false reading (he was using a non contact). He was like huh? I explained it to him and then proved it when I got there; The meter showed he had only 87V. The non contact gave a positive for voltage. However he had AL wiring and I was not qualified or going to mess with it. In all likelihood, he had wire running in the attic that he had stepped on (he said he'd been up in the attic and issues followed) and had partially broken. I could've used Oxguard or something and joined the wires, but I wasn't messing with that shit. That's all I would have needed was to burn his f'n house down.

@RoKCRWLR

3 жыл бұрын

@@WiPri0371 87v sounds like an open neutral

@WiPri0371

3 жыл бұрын

@@RoKCRWLR I checked ground. No current. Despite all, he had a partial break in the pairs somewhere. Regardless. It was AL wiring. I wasn't messing with that. I didn't have purple connectors. Just OxGuard. Which is unsuitable for AL/CU connections. Besides, I didn't know where the break was and had no materials. All thanks to our CSR who had no construction experience at all. And she's older than me!

@Dezeberbro

3 жыл бұрын

No lie here. I found out the hard way lol

@harvestblades

2 жыл бұрын

Trust, but verifty. Agreed never work on a circuit without testing with a meter yourself that it is off.

THANK YOU for not blabbing about everything, like so many other videos that I’ve wasted my time on. This video was great!

Really great video. I appreciated the little details like how you need to hold the panel cover while you unscrew it. Really shows that you've done this before and are giving good advice.

Tripping for a year! Sounds like my baby mama!

@bruceallen2401

3 жыл бұрын

🤣🤣

@TheWholeHealingHomie

3 жыл бұрын

🤣🤣🤣🤣🤣🤣

@strangerofthe2067

3 жыл бұрын

But is it your... FAULT? 😂

@determinedlyunmotivated4300

3 жыл бұрын

Best comment ever

@oniayand

3 жыл бұрын

💀😭🤣💀😭🤣

I just completed some electrical upgrades that required breaker replacements. Your video is very thorough and covers safety topics, which is nice for those who have limited experience. Nice job, brother!

@johnd9357

3 жыл бұрын

Hopefully you didn’t add higher amperage breakers without also completely upgrading the whole circuit as well. I have seen many times where people take a 15a circuit with 14-2 wire and simply swap the breaker to a 20a and think their problem is solved. However now they have a breaker that will allow a current load that their wires and other components can’t handle. So guess what, they get hot. Like fire hazard hot. Just a heads up in case this happened.

@MrRowbeartoes

3 жыл бұрын

@@johnd9357 Oh no. I'm fully aware of the amperage rating differences between 14 awg and 12 awg wire. My dad was an electrician for 20 years and I was fortunate enough to apprentice under him. This lesson I learned early on. 👍

@JackJensenTrader

2 жыл бұрын

@@johnd9357 Good info. Separate question: we have an unused 30a breaker. Can I assume that there's enough power coming to the house to provide adequate voltage for whatever I'd add on there? Thinking of a bidet, fwiw.

I really appreciate your thorough no nonsense informative style! So many videos I see talk for 15 minutes and half of it is about the screwdriver that they’re using. Thank you very much for delivering this helpful information quickly and effectively!

Thank you for taking the time to share your knowledge. Just wanted to make sure the main breaker up top does shot all power off to the rest of the breakers.

I am a radio troop, and this made me feel super comfortable handling this myself. Thanks!

great video. I need to upgrade from a 30 amp to 50 amp, and I'm sure there's plenty more involved than just a break replacement (most likely a totally different wire/cable). But I appreciate the learning opportunity. Now, on to calling an electrician with helping me with upgrade.

This is exactly the type of Instructional video I was looking for. It was super informative. Thank you so much for sharing.

@SilverCymbal

3 жыл бұрын

Glad it was helpful! Thank you for the nice words

THANK YOU SO MUCH! We switched from a gas dryer to our brand new electric dryer. It has its own two lines, but they are old and was partly tripping; it turns on, but doesn't heat. This video makes me feel more confident to do it on my own.

@vivimu

2 жыл бұрын

Gas dryers are so much better than electric why did you want to switch?

very nicely done! crisp delivery, no wasted time, all business, great info, advice and cautions! I took notes and followed step by step... and did the job... thank you!

@teresaricoy1639

Жыл бұрын

I am just done watching the video, and it sounds like a very straight forward. Did you do it yourself? Did you have any unexpected issues? I am just not sure if I should do it.

Great video! This was the first time I replaced a breaker and this video was exactly what I needed. Thanks

Very good demo on how to do this. Great presentation as well. Thank you for the effort you put into this. It helped.

The most descriptive, no nonsense video on KZread. Thank you

Great video. Down to business, step by step, no unnecessary babble. Loved it. On my way to Lowes.

Thank you for posting this instructional video. Not only was I able to replace our circuit breaker quickly and with confidence (and without frying myself) but your explaination and walk-thru was quick and concise, without all the typical backstory most KZread instructional videos come with. Thank you again.

I told my landlord that the problem was with the circuit breaker, because it kept flipping to the off position but he REFUSED, literally, to listen to me because I'm not an electrician. He insisted that the outlets needed to be replaced, I think because the tenant he hired to do my repairs told him that was it. Now I see that I'm vindicated. Thanks! And thanks for the clear easy to follow instructions!

Thank you. Clear concise and made it easy for me to do. Hardest part was finding the right one at HD. Always end up going to Lowe's. Should just start there moving forward I guess.

One very important fact was not mentioned about replacing breakers. Always replace any breaker with the same amperage. It is dangerous to install a 20 or 30 amp breakers where a 15amp is. Some people think that when a 15 amp breaker trips often they need to add more power to the circuit. They can burn their house down that way. ALWAYS REPLACE 15 AMP WITH 15. 20 amp with 20 and so on.

@LuneLuan

2 жыл бұрын

I was gonna replace 10 with 40

@windsofmarchjourneyperrytr2823

Жыл бұрын

If you're that stupid, you deserve to get a zap or burn the place down lol.

Nice job! My two cents It's a square d homeline 115. On panel covers, its always easier to remove center screws last. Last, you should restrip the wire, because it could be compromised by overtighten by orginal installer. 👏👏👏👌

@jackconnolly2665

2 жыл бұрын

Always easier? I generally leave the top screws for last, specifically the top right because I'm right handed. I seems to be easier for me. Of course, I have only done it a few thousand times :)

What an excellent instructional video. Thank you so much, now I'm going to try to fix it myself. 😀

This was extremely helpful! Thought our over-the-range microwave was on its last leg, as the lights would flicker and power would start to bog down every few seconds. If I opened the door before the time was up it would short out and not turn back on unless I went to reset the breaker and push on it. Ran to HD grabbed a slim dual 20 amp breaker and it's all good. Thanks again!

This was a really helpful video. Thanks for saving me a bunch of money on an electrician!

Great video! After watching your very informative video, I am very confident that I will be calling an electrician for all of my electrical needs!! 😆

Thank you so much for the easy to follow directions. I had no prior experience changing circuit breakers but was able to address the issue.

Thank you for the video. As a first time home owner I found this helpful. What wasn't helpful was it happened at 1 am so I had to swap the breaker from the guest bedroom to get power to the master.

I’m no electrician but this is exactly why I’ll leave this to the electrician my life is to valuable

@SilverCymbal

3 жыл бұрын

Nothing wrong with that, no one should work on electrical system that isn't completely comfortable. When in doubt hire someone but at least now you know what you are paying for.

@quen305fishing7

2 жыл бұрын

I agree 100% something you just don't play with especially where you sleep at night.

@princezay3608

2 ай бұрын

Lmaoo scary mfs you take the proper precautions so you don’t end up fried thir is honestly one of the easiest electrical things you can do lol doing receptacles have 3-4 wires

You need to put a disclaimer on here. You shouldn't replace a breaker until you know exactly what's wrong. You need to test the breaker first. resetting breakers that are tripping constantly can cause fires.

@spencercohen1577

3 жыл бұрын

Right on

@sergioherrera3029

2 жыл бұрын

😱

@jackconnolly2665

2 жыл бұрын

There is no affordable/practical test for a breaker. A professional would simply install a new breaker and it will trip if/when over loaded. He hasn't increased the risk of fire in this case. If he replaced the 15A with a 30 A, he would be increasing the risk of fire :) Also, his breaker wasn't "constantly" tripping. I believe he said several times in 2 years.

A few years ago, my elderly neighbor changed a faulty circuit breaker in my box. I wanted to change it so that I could get the experience for the next repair. Unfortunately he insisted on doing the repair while I watched. He passed away almost two years ago; and now I have to make another circuit breaker repair. This video has helped a great deal.

Clear, concise appropriate information. You get an A+ for this video. Thank you !!

If I go back to the US im going to visit. I'll bring some Irish whisky. Your videos are amazing. Thanks

@SilverCymbal

3 жыл бұрын

Sounds good to me, thank you!

SC, good info. Another thought is to put the wire into the breaker before you put the new one in. IF you have enough wire! The new style of screw set, or whatever its called, is so much nicer than having to make a loop the wire. Question: How do you test a breaker if it's ok or needs replaced?

@SilverCymbal

3 жыл бұрын

Yes, I like to put the wire in after it's mounted for the reason you said, usually the wire is not free enough, but also it's much easier to get it good and tight. When you hold it in your hand you kind f fight the torque. im sure it can work but with both choices I usually wire it after it's in. So there really is no great test. Because you can short a circuit and a breaker will trip but it might fail one out of ever 20 times. My advice is if you think the rest of your circuit is good, Replace the breaker and see if it helps.

Spot on information! From a woman who had never opened a breaker box before. Thank you

I’m not even done watching but LOVE YOUR instruction ! I believe I CAN HANDLE THIS ... THANK YOU !

Wow! Your video totally gave me the confidence to do it myself. I usually to not like to mess with anything electrical. Thanks you much!

I learned a lot with this video! Can you also do one on how to install a surge protector for the entire panel?

@SilverCymbal

3 жыл бұрын

I have gotten a lot of requests for that, and your comment was a good reminder. Let me see what I can do, they are very easy and such a cheap investment. Let me see what I can do.

@sprinterdiscovery

3 жыл бұрын

@@SilverCymbal Much appreciated! Over the years we've lost a fridge and a Miele washer motor due to power spikes and electrical storms. A video would be really handy. Your videos are always informative. We learn a lot from them!

This is great information, I've had a switch go out and I wondered if it was possible for me to replace it. Thank you very much for your help. We've been having lots of power surges lately. Subbed & hit the bell for notifications 👍🏽👍🏽

Outstanding video & description of how to replace a breaker! Very thorough! Thank you!

Very helpful -- thank you much.

I'm a chicken when it comes to electricity, but this is a really informative video!

@danbasta3677

3 жыл бұрын

I can understand your fear Pam, however always remember one major thing. If and when you do want to take a stab at fixing a electrical problem within your home, RULE NUMBER ONE, IS TO KILL THE POWER! Once the power is completely off, you can work on the electricity all day if you want. That is the most stringent rule ever to follow. If your not sure which breaker controls which area that you want to work on, again, KILL THE POWER THIS TIME AT THE MAIN, which brings in your electricity from street side to your house. Never, EVER, EVER work on anything electrical until the power is completely shut of, never work on anything or any live wires at all when the power HASN'T BEEN SHUT OFF.

@tf3confirmedbuthv54

3 жыл бұрын

@@submittedbymail Until it is bad, i have touched the output of a microwave oven transformer and have first hand experienced cardiac fibrillation, possibly the scariest experience i’ve ever had and it’s by far the closest i have come to dying. Know the risks before you do stuff with electricity.

@danbasta3677

3 жыл бұрын

@@tf3confirmedbuthv54 Agree with you, complety!

@anddrrezh3625

3 жыл бұрын

Hahaha me too

@brt-jn7kg

3 жыл бұрын

I spent nearly 20 years as a Texas peace officer. Before that United States marine. Been in combat and I have been in police shootings. they never bothered me not the car wrecks the dead bodies the horrible things that people do to each other unless a kid was involved. I will tell you though the two things that always scare me to this day and one of them is fire especially vehicle or a house fire and the other is electricity.

Very nicely explained. You touched on all the points to look out for and made it look too easy. Kudos!!! I would only say that a pen tester is not 100% reliable like one commenter pointed out and would caution usage

Easy to understand and vert straight forward for people like me who don't have a lot of electrical know how. Gave me the confidence to try it. Thanks

@SilverCymbal

3 жыл бұрын

Glad it was helpful

I would pull the breaker out of it's socket before loosening the wire. And then attach the wire to the new breaker before inserting it into the electrical panel. The reason being if the main breaker was faulty or the owner forgot to flip the main off, there would be an added level of safety.

@tripjet999

2 жыл бұрын

"its"

There is one safety point that I think should be mentioned. Let me disclose at the outset that I am not experienced with these things. But, I went and bought Black and Decker's "Complete Guide to Wiring". It mentions that the service wires coming into the breaker box are ALWAYS hot, even after you've thrown the main breaker. It says to NEVER touch the service wire lugs. I guess that's pretty obvious, but given how important it is, I think that would be a good addition to the video. I thought it was a great video!

@oodyjones

8 ай бұрын

But he did go over that at 2:55 mark 👌🏿

@MSPoetrySociety

8 ай бұрын

@@oodyjones Wasn't there when I watched it. Must have been added. That's good! A person could be killed.

@oodyjones

8 ай бұрын

@@MSPoetrySociety Oooooh ok... That makes sense 🙏🏿. I didn't realize videos could be edited like that now on KZread 😮

This is a great video. BF is out of town and the house was built in 1930 and apparently the whole house runs on one breaker. I figured I could just replace it myself. Great video!

Thank you, Thank you, Thank you. Today my handylady and I changed two of my breaker switches! We watched your toturirial several times and said "we can do this!" and with your help we did! I must say it was a little scary when we did the first one but we kept rewinding your instructions and we finished without any problems. The switches I needed were 30 amp switches and they cost $24.95 each at Home Depot. I saved two to three hundred dollars by not employing an Electrician. Again thank you.

@jackconnolly2665

2 жыл бұрын

Did replacing the breaker solve your problem?

@debf.4539

2 жыл бұрын

@@jackconnolly2665 👍 Yes!

I think it's important to note that breakers dont go bad as often as circuits have faults. If your breaker is tripping, it probably means a fault on the circuit.

@hempelcx

2 жыл бұрын

Certainly. But if the circuit has nothing plugged in or turned on and hasn't been altered for decades, chances are decent it's a mechanical part failing versus a static part. And as mentioned in the video there's very little to lose by replacing a breaker (as long as it's done correctly) so it's worth trying as a diagnostic step.

As I've said before, always producing solid content.

@SilverCymbal

3 жыл бұрын

I really appreciate that. Thank you

@joeygibbs4775

3 жыл бұрын

For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. begotten Son, that whosoever believeth in him should not perish, but have everlasting life.“Then Peter said unto them, Repent, and be baptized every one of you in the name of Jesus Christ for the remission of sins, and ye shall receive the gift of the Holy Ghost".

Thank you so much. My office breaker keeps tripping in our apartment. No other breaker had issues and the place is old so I knew it just needed to be replaced. Your video was direct, clear, and very informative. Unfortunately, even with the new breaker. It was still tripping. On to the next plan, I guess.

Interesting.. it looks like you're replacing a printer ink cartridge that could fry you into oblivion. That's terrifyingly fascinating

@SilverCymbal

3 жыл бұрын

That is a very clever observation, I never thought of that but you are right, they go in just like them!

@crand20033

2 жыл бұрын

No sir, it's only 120 volts going into that one breaker. Just turn it off and you are safe.

Great video, dude. You got to the point while giving relevant detail. I learned how to do this and you got a Like and Follow. I wish more KZreadrs would make vids like this and skip all the preambles. Thank you so much! I’ll be watching.

It's been many a year since I changed one and I forgot what you do. Your video was a good refresher and brought everything back to the front of my brain. thanks

@SilverCymbal

2 жыл бұрын

Glad it helped!

Thanks for another great instructional video. I have a sub-panel in the garage that has had a failed breaker for a couple of weeks. Took me less than five minutes to apply my newfound knowledge saving me over $100.

Can you test the breaker itself? I also wanted to say when you'r turning off the panel you can shut the main off, I was told when you turn the power back on you should have all breakers off and 1 turn the Main ON then one at a time flip them all back on. I understand it lessons the SURGE to the main Panel of all breakers. I am not an electrician, but I have electrical knowledge.

Looks so simple that I’m almost tempted to try it iffffff I wasn’t fearful of burning the house down🥲.

@SilverCymbal

3 жыл бұрын

Thank you, nothing wrong with that, at least if you hire someone you now know what's involved.

@jamesmoriarty9603

3 жыл бұрын

Exactly!! I don't want to be given false confidence and lose something valuable like, oh i donno, MY WHOLE GOD BLESSED HOUSE hahaha. I'm smart enough to know how dumb I am and that I could easily screw this up bad

Thank you so much! God led me to your video! I asked an electrician to replace the breaker & he's taking forever to do the job. Your video truly helps & I feel confident that I can exchange the breaker myself. Much success with everything! 🎉❤

8 Pm in Texas during this record heat the breaker for the A/C failed. Watched your video. Pulled the panel apart and removed the breaker. Made a run to Home depot. Installed the new one and I'm back up and running! 2 hours total time... THANK YOU! 😅

Another excellent informative video...Well done, pls keep it up! Sadly, I'm chicken too when it's things electrical 😢

@SilverCymbal

3 жыл бұрын

I appreciate that thank you

@gkky997

3 жыл бұрын

Most welcome, my friend 👏

@ Silver Cymbal Thank you! Thank you! Thank you!!!! This video was a lifesaver. I never thought I would be able to this on my own. The way you explained every detail has helped me. Thank you so much 😊

@SilverCymbal

3 жыл бұрын

Glad it helped!

Thank you so much for this easy to follow video; it’s been a long time I broke a sweat for something so new… so very scared new. Thanks a million!

Thank you so much for this! I went through the same line of reasoning that you did to decide that it was not the circuitry that was bad it was the actual switch. When I told that to an electrician over the phone, he said that he was sure it was the circuitry and wanted to rewire it all, and he promised he would try to not break down too much of the drywall. Wow this is terrific for us DIYers :)

@windsofmarchjourneyperrytr2823

Жыл бұрын

Tell him to do thr cheap thing first. Then watch him. Lol. Because people LIE.

I'd suggest unplugging Smart TVs and routers before switching their circuit off, especially the main. There is a very short brownout voltage sag period during the switchover, and some electronics do not take well when they are under volted. They may appear to still work, but can exhibit glitches or lag until fully factory reset or reflashed. My Netgear could deal with a year's worth of random power outages before slowing down, but if I would play around with the circuit it was connect to it immediately would slow down, in some cases brick into some help-me mode, and require a low level reflash from the Windows command prompt...not fun when you have other things to be doing.

@JackJensenTrader

2 жыл бұрын

So, there's a "brownout" when powering off via a circuit breaker, but not when unplugging it?

@JShdwstar

2 жыл бұрын

@@JackJensenTrader seems like an eddy current..

A natural teacher. You have the gift!

@SilverCymbal

3 жыл бұрын

That is really kind of you to say thank you

@gary4738

3 жыл бұрын

Btw, my lawn looks absolutely smoking thanks to your many insights/vid’s. Keep em coming. I’ve learn sooooo much. Many thanks!

@SilverCymbal

3 жыл бұрын

@@gary4738 So glad to hear it. I have a lot of good stuff planned for the Spring to help you keep it that way and hopefully give some new ideas too. Thanks so much! glad the videos have helped.

All of your instructional videos are concise easy to understand and offer all the details.

@SilverCymbal

3 жыл бұрын

I really appreciate that Thank you

Thanks for the tips. A quick and easy fix. Took more time to go buy the new breaker than it did to install it.

@kcastillo1234

2 жыл бұрын

He said under $5 but the beaker mine uses costs $75-$110 each

great video. thanks for sharing. if my breaker trip frequently when i got like two small load running, is that means my beaker is bad or old? house about 20 years. thanks

@jackconnolly2665

2 жыл бұрын

What is "two small loads"? A microwave and a hair dryer? LOL A breaker is only $5 so, replace it with the SAME AMPERAGE RATING and find out.

@SlotsFantasy

2 жыл бұрын

@@jackconnolly2665 air fryer and a small rice cooker 😆

I've been told it's a good practice to turn off all the individual breakers one at a time BEFORE switching off the main. After the job, switch the main back on and THEN one at a time turn on the individual breakers. The idea is to avoid power surges. Thoughts?

@coryvassallo2398

3 жыл бұрын

You are correct on this if a heavy load is on its possible a surge may happen and destroy valuable electronics in the home. This is caused by an inrush of current From larger load appliances turning on simultaneously along with the smaller appliances/ outlets of any kind. Good catch there are a few things that are flawed here. Especially if you have a dead short or the breaker is tripping for a reason you always want to have it checked. Leave it to the professionals unless you are capable and have knowledge in the field.

@enmodo

2 жыл бұрын

I was wondering about that too, thanks for asking. If your A/C, water heater, and dryer are all cranking that's a lot of amps to be throwing off at once.

@tripjet999

2 жыл бұрын

Do you shut off the breakers when you have a power failure? I've never heard of a problem. You would want to install one or two Square "D" overload arrestors in the box, for protection from lighting, power spikes, etc.

IT worked GREAT, Super easy to do!!! Cost me under $9.00 and the estimate from the electrician was $120.

Thank you for the well made video with good practical instructions. I was looking for some tips when my breaker had recurring trips.

You forgot to mention to make sure the new breaker is in the OFF position before installing it and wiring it.

@stgermain1074

3 жыл бұрын

Should it matter if the main breaker is off? No juice going down the wire.

@pierreletourneau722

2 жыл бұрын

I noticed that Square D breaker are tripped when you buy them. They probably test them before shipping.

Crazy timing I think one of my breakers just failed. Going to try to do this myself!

Thank you so much for this video. I just changed my circuit breaker following your instructions and now everything's up n running.

dude! perfect video. haven't done breakers in a while. refresher course. thanks for getting to the point

Rarely do circuit breakers go bad. 99% of the time the circuit is either overloaded, a short-circuit is happening, or a ground fault.

@ITSjpBitch1

2 жыл бұрын

Having an emergency, can you help?

@S.P.Kid88

2 жыл бұрын

What do you do then?

@hempelcx

2 жыл бұрын

@@S.P.Kid88 Call an electrician. Replacing a breaker is cheaper and quicker. It may not solve the problem, but you've lost nothing by trying it. Just make sure you do it correctly.

@milagrossmith4891

2 жыл бұрын

Funny you mention the ground because I'm having an issue and I'm not sure is it's ground related. while doing laundry the clothes dryer breaker kept tripping. I went to the panel and it was very hot. I reset the main and it happened a few more times. Now I only have power to half of my house. Any ideas/ Suggestions? what do i need to replace? I asked this of others but forgot to mention after tripping the main a couple of times power came back to the house but not to certain areas in the kitchen. I hit the test button on my gfci and it knocked the power to the entire house again so now only half the house is powered. Any suggestions??

In most cases, very seldom does a circuit breaker go “bad”. A circuit breaker is doing its job if and when it trips. There are many reasons why a breaker might seem to be nuisance tripping but most likely is tripping due to an actual over current occurrence. This guy gives no explanation on how he knows for certain that thiers is nothing wrong with his circuit, just because a breaker trips does not mean it needs to be replaced. Notice the label on the wire being changed. “2 baths”. This circuit breaker more than likely tripped because both baths were being used at the same time with let’s say 2 hair dryers going. This could be enough amperage draw to trip this breaker. Well done, the breaker did it’s job. Now unplug one hair dryer and reset the breaker. No need to change the breaker. You just simply can’t use 2 hair dryers at the same time and the breaker is doing it’s job to protect the wire. Many other variables need to be taken into account in a situation like this This guy is not an electrician and should not be giving advice on doing electrical work.

@bigmacdaddy1234

3 жыл бұрын

He wasn't giving advice on doing electrical work, he was only showing how he changes a breaker. Big difference. The bigger concern here is why you don't realize this.

@bigmacdaddy1234

3 жыл бұрын

@@michaelwarnock3988 You are wrong. I watched his video and changed my own breaker. It was simple and easy.

@bigmacdaddy1234

3 жыл бұрын

@@michaelwarnock3988 Nope. I will not be liable. Everything is up to code with a permit. Furthermore, I had to redo both wiring jobs that the last two incompetent licensed Master Electricians did (they used tape everywhere). In case you didn't know, most licensed trades people do a lousy job, they just want to make their quick money and get out asap. From my experience, most horror jobs were done by licensed professionals. I am sure there are a few good ones out there, but most are awful.

@petermoto409

2 жыл бұрын

@@bigmacdaddy1234 You are a fucking fool. If you really think all this bullshit then you need to find a better class of people or move to a less corrupt part of the country. You use the term "most" a lot in this diatribe, but YOU are the one that's wrong. Change most to "some" and you are a bit more correct.

@petermoto409

2 жыл бұрын

You are 100% correct!

Thanks for the video. 20 amp circuit breaker replaced with no problem. No call-out fee, labor and parts for this job, fix it myself.

Thanks man! Solved my issue. My window ac unit running with my TV and sound system would trip randomly once a week or multiple times a day. I followed your exact directions and havnt had a breaker trip since. Much appreciated.

Good vid as always. Very informative. Not sure why the several thumbs down. Maybe electricians who don’t want owners doing their own work?

@SilverCymbal

3 жыл бұрын

Thank you very much, could be!