We are going over the steps to swap out the factory tail lights to an aftermarket set of tail lights for your 2012 Mustang GT.
1. Tools - 0:12
2. Step 1 (Remove Trunk Panel Retainers) - 0:39
3. Step 2 (Remove Trunk Panel) - 1:28
4. Step 3 (Disconnect Trunk Panel Light) - 1:40
5. Step 4 (Disconnect Tail Light Wiring Harness) - 1:50
6. Step 5 (Remove Tail Light Nuts) - 2:12
7. Step 6 (Remove Tail Light) - 2:30
8. Step 7 (Clean Tail Light Housing) - 2:58
9. Step 8 (Remove Shipping Caps) - 3:22
10. Step 9 (Install Harness Grommet) - 3:54
11. Step 10 (Install Replacement Tail Light) - 4:10
12. Step 11 (Install Tail Light Nuts) - 4:37
13. Step 12 (Connect Tail Light Wiring Harness) - 4:52
14. Step 13 (Install 2nd Replacement Tail Light) - 5:15
15. Step 14 (Reconnect Trunk Panel Light) - 6:23
16. Step 15 (Install Trunk Panel) - 6:46
17. Step 16 (Install Trunk Panel Retainers) - 7:00
18. Show it off! - 7:28
Products Used:
This video contains affiliate links for which I may receive compensation.
Raxiom Vector V2 LED Tail Lights - www.americanmuscle.com/raxiom...
Waterless Wash and Wax Spray - www.amsoil.com/p/miracle-wash...
Trim Removal Tool Set - amzn.to/35Lry84
Tools:
Trim Removal Tool Set
1/4" Socket Wrench
11mm Socket
Microfiber Cloth
Moving Blanket (Optional)
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZread is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZread. Use this information at your own risk.
#RaxiomVector #AmericanMuscle #S197