Discord - invite.itjungle.eu If you have any questions, regarding Laptop repair and etc. you can join and ask for help.

I changed my screen for 15ALC6, it’s a little different but your video helped a lot! Thanks.

This was just the video I needed. In addition to a broken screen, my hinges were also broken, so the full tutorial on how to replace the entire display was clear and helped me to save an otherwise very good laptop from going to e-waste. Thanks for the clear steps and helpful video!

Man, you are awesome! Thank you so much. I followed all your steps and I managed to replace my display. My sincere congratulations for your clear explanation from Rio de Janeiro, Brazil 🙏

Very very helpful - managed to replace my damage screen perfectly following this! Thank you!

a big thank you! you saved one kid's laptop :)

Very well done!

like ur video thanks my screen just got broken

the best computer very goood

Nice....

Hey brother, Thanks for the video. What size double sided tape did you use?

@LaptopDisassembly

6 ай бұрын

Some no name brand. I have it from the local tool shop. All i know is it is 12cm. wide. it is thickж as paper. :)

May God bless you who stopped at this comment and your whole family, may you prosper in all areas

@ALIENGOATMESSI

29 күн бұрын

God bless

@hbrmetal

29 күн бұрын

@@ALIENGOATMESSI Amen

Thanks for this demonstration. I understand the need to disconnect the battery, but what is the purpose of disconnecting WIFI?

@LaptopDisassembly

7 ай бұрын

I disconnect the wifi in order to remove the whole display with the plastic. This way is much easier to work. You can replace it without removing it also.

@averagejessebell

7 ай бұрын

@@LaptopDisassembly Thank you!

9:59 why did you apply the tape just to take it off? I don’t know anything about computers in this matter, a buddy at school had his laptop screen cracked and I thought to look for myself on yt to see how it can be changed rather than paying as imo it doesn’t seem like a difficult task at all just patience and correct tools.

@LaptopDisassembly

24 күн бұрын

I apply double sided tape. So when one side is stick to the plastic, I remove the other isolation layer so that the other side get open and the display get stuck to it.

@DEATHWISHVQ

17 күн бұрын

@@LaptopDisassembly thank you!

fan cleaner ?

At 4:25 you start removing the grey bottom bit below the screen before removing the black edge at around 4:55. I thought it was much easier to reverse that and start with the black rim before removing that grey bit. Is there a good reason to do it your way that i am not seeing?

@12many4you

6 ай бұрын

Also. Thanks man. Your video helped me be brave enough to try this

@LaptopDisassembly

6 ай бұрын

the gray bottom is on a slide mechanism. So if you try to remove the black first, there is a big chance to brake the plastic bits, that are holding the gray bottom.

Must i detach the entire lcd lid? Im thinking to just replace the panel by dc battery cable, but display and wifi cable still intact..

@LaptopDisassembly

Ай бұрын

No need to remove the wifi cables in order to replace the display. But if you gonna replace the whole display assembly you need to swap the wifi and camera.

How much will this repair cost without warranty and also can it be covered with ADP warranty?

@LaptopDisassembly

9 ай бұрын

If you phonically damage you display the warranty will not cover it. If everything is fine and no sign of damage, the warranty should cover it. Otherwise the display cost around 100$.

How do I know if the display is damaged or is only the connector, bc my display and connector looks like new and if I connect an external monitor it works but the display is still black

@LaptopDisassembly

Жыл бұрын

Best way is to test with another display. It can be broken, just to test do you have a backlight.

@emenikeokorie3680

9 ай бұрын

I have same problem. Everything looks new but no display. Screen is black. My keyboard backlight works fine. When I use an external monitor, everything is perfect. Done all software fixes I could find on KZread to no avail. What could be the problem?

@LaptopDisassembly

9 ай бұрын

@emenikeokorie3680 can be a bad connection. Try to disconnect and than connect back the display. But first disconect the battery.

@emenikeokorie3680

9 ай бұрын

Oh thanks, did that but it didn't work still.

I didn't disconnect battery before removing the screen cable... I was fixing the hinge.. After finish my screen is black not showing light.. But outside screen is working... Did I mess the screen because not removing battery first?

@LaptopDisassembly

Ай бұрын

Did you disconnect the screen while the battery was plugged in. If yes, you may burned the backlight fuse on the display.

Para que es el circuito gris

I changed the display and now the PC does not show anything but a screen with a backlight. I connected an external display and it is the same thing. Just a blank screen. Sometimes I get flashing vertical and horizontal lines. Not sure what happened. No sounds, no beeps, no anything. Have you had this issue before? Thanks.

@LaptopDisassembly

11 ай бұрын

Did you disconnect the battery before replacing the display. Also try to reconnect the display cable and memory.

@CodeIsLife101

11 ай бұрын

@LaptopDisassembly Thanks for the reply. I did disconnect the battery. I will try to dismount and mount the ram chip. I tried accessing BIOS, and it seems to do something, but all I get is a back lit black screen.

@CodeIsLife101

11 ай бұрын

@@LaptopDisassemblyOkay, the screen displays with an externally connected monitor, but the laptop screen remains black only showing the backlight

@LaptopDisassembly

11 ай бұрын

Are you sure the display is compatible... Try with the old one to see is it behaves the same. Sometimes if the display is not compatible it shows only backlight or only white display.

@CodeIsLife101

11 ай бұрын

@LaptopDisassembly That is a good point. This display is for multiple lenovo laptop versions.

How much the desplay set price

@LaptopDisassembly

Жыл бұрын

There is a model on the display in the description. The price is different, depend on your region. www.aliexpress.com/item/1005003740570777.html

is lenovo ideapad 3 15itl6 i5 10th gen display is 30 or 40 pin

@LaptopDisassembly

27 күн бұрын

should be 30pin. LCD Cable Lenovo IdeaPad 3 15 3-15ITL6 alc6 ABA7 ADA6 30Pin eDP - PN# 5C10S30208 DC02C00QY20

@DikshaSaro

27 күн бұрын

Display name?

@LaptopDisassembly

27 күн бұрын

kzread.info/dash/bejne/ent5sayaqaXQoqQ.html Innolux N140BGA-EA4 rev c3

is it really necessary to remove the entire lcd from the rest of the laptop?

@LaptopDisassembly

4 ай бұрын

Yes it is way more easy, because you have to remove the middle plastic.

@JesusIsUnstoppable

4 ай бұрын

@@LaptopDisassembly I used a plastic spunger nad it popped right off. I changed the screen in about 5 minutes. Actually i took off the screen in 5 minutes. new screen tomorrow. But i wanted to let you knwo i was able ot use the spunger nad just pop off that plastic peice without taking the rest of the assembly apart.

@LaptopDisassembly

4 ай бұрын

@JesusIsUnstoppable sometimes the middle plastic is on a slide mechanism, and if you open it directly it breaks. For me is more easy to remove the whole assembly.

I installed the new screen but when I turned the laptop on, the screen didn't work. I believe the display connection might be the problem. But now I'm afraid to open it up again in case the new screen breaks. Any suggestions?

@LaptopDisassembly

7 ай бұрын

Disconnect the screen from the board and test on external display with HDMI. If there is a picture, than the connection on the display side can be the problem. If you gonna remove the display, put some alcohol on a sharp blade or a opening tool and slide it.. this way you will remove the adhesive easy

@ETgolf

7 ай бұрын

How do I disconnect the screen from the board?@@LaptopDisassembly

@LaptopDisassembly

7 ай бұрын

@@ETgolf Lift the back cover of the laptop. It should be visible.

@ETgolf

6 ай бұрын

Okay, I got it open again and reinstalled it. Now the display kind of works - I can see the images but it's as if there is no light. They are kind of grey or shadowed.@@LaptopDisassembly

@LaptopDisassembly

6 ай бұрын

@ETgolf can you upload a picture somewhere so I can see exactly.