How to Replace Intake Manifold 2006-2009 Mercedes-Benz E350 (3.5L V6)
Автокөліктер мен көлік құралдары
Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ib/1AEIM00063
This video shows you how to install a new intake manifold from TRQ on your 2006-2009 Mercedes-Benz E350. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obwM/1AXAA00013
• Pry Bar 1aau.to/o25/1AXAA00020
• 10mm Wrench 1aau.to/o5H/1AXAA00010
• Needle nose pliers 1aau.to/oGu/1AXAA00051
• Needle nose pliers 1aau.to/oGu/1AXAA00052
• Pliers
• Wire Cutters
• E10 Socket
• T30 Socket
• Ratchet 1aau.to/obR5/1AXAA00016
• Torque Wrench 1aau.to/oaVy/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oH8/1AXSS00035
• Gloves 1aau.to/oaBP/1AXSS00048
• Safety Glasses
• Wire Ties
• Pick 1aau.to/oU6/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 9
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
Thank you so much! Followed the video step by step and got mine replaced without issues. Never done anything like this before, just didn’t want to pay a shop a ton again
This is the most detailed video I've ever seen, if that doesn't give you confidence to do this job then leave it alone and take it to the shop very good video thank you sir
Thanks for the Video hope you do more for this kind of car
Great video and even better part. I used one of your intakes for the first time yesterday on a customer's 06 E350 4Matic and it is an excellent part. All of the holes were threaded which isn't the case with most that are a little cheaper. I will be using your intake moving forward. I would just like to caution you on one part of the install. I wouldn't put the gaskets on the head because there is a good chance of them shifting causing a vacuum leak. The OEM gaskets have sections that stick to the intake to hold it in place. The method I have used for over a decade is installing zip ties in the 4 holes in the middle. This holds the gasket in place regardless of what you bump. Then put the 4 bolts, loosely, in the corners to hold it in place. Then cut each zip tie and install a bolt at a time. This has never failed. Otherwise, the video is excellent.
AWESOME video. Best I've seen for the manifold replacement.
Thank you for the video man👍
I have 2007 Ml 350 need to exchange intake manifold.There are so many manifold to buy. Confuseing. I am worried about the fix. I see tRQ is threaded many or not. Your video make me fill I can do this my self.LOL Will you come and help. LOL I am going to purchase TRQ thanks to you sir
when you disconnet the battery. Does that effect the computor. I was told the computor needs to still be operating so the you will not have to reset or reprogram if the battery is disconnected?