No video
HOW TO REPLACE IGNITION LOCK AND REPROGRAM KEYS ON YOUR 1998-2012 HONDA ACCORD. STEP BY STEP.
THIS VIDEO WILL AHOW YOU HOW TO REPLACE IGNITION LOCK AND REPROGRAM KEYS ON YOUR 1998-2012 HONDA ACCORD.
THIS IS A LINK FOR THE SAME SCAN TOOL I USED TO PROGRAM KEYS TO NEW IMMOBILIZER UNIT.
ws-na.amazon-adsystem.com/widg...
THESE LINKS IS FOR IGNITION LOCK ASSY I LIKE TO USED.
ws-na.amazon-adsystem.com/widg...
ws-na.amazon-adsystem.com/widg...
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
Пікірлер: 576
Great tips within the video for changing the ignition lock. But before you get a locksmith into program the new keys. Place the new ignition key. In to the ignition, and hold the old car key near the ignition. Try and start the car. Should it start. Keep it near the ignition for at least 60 seconds or more. Then you know that the old transponder works. And starts the car. Then you can remove the transponder chip from your old key. And put it into the new key. Hopefully there will be no need for an auto electrician to program your new key.
@nanieberoin4902
6 ай бұрын
How you remove the transponder?
@Forever4clothing
2 ай бұрын
@@nanieberoin4902gotta cut open the key .. it’s a bunch of videos that show you
@samsambajon8372
Ай бұрын
How about if i change the oild immobilizer into the new ignition barrel will it work?
Hi George, this is one of the best DIY video I've seen in a very long time. You did and excellent job and it is truly appreciated. Much respect to you and thanks for your great work.
Fantastic Presentation ! I was attempting to find all actors in the chain for a 08 CRV key stuck in ignition that will not come out: from slamming the shift lever into P , suspecting a D3/P pin switch in the lever quadrant, and finally the PRNDL rotating external switch at the end of the transmission. Never thought of a worn ignition key !! Thank you so much for sharing your experience and knowledge . The best I have seen in a long time !!
Had to make replacement keys for an '04 Odyssey and '03 TL. The dealer/locksmith wanted a bunch of money to cut and program new keys. So I did a bit of research and located this video. I bought key blanks online from a discounted dealer site and then had a locksmith cut the keys. I purchased the Launch x431scan tool directly from the Amazon link in the description. Launch charged $66 bucks each for Acura and Honda software though, so be aware of the possible extra cost there. It took fewer than five minutes to reprogram new keys -- easy to do with the right tools and how-to information. Success!!! Thanks George for the helpful video!
Thanks for the informative video. I was in the process of swapping out my ECU, immobilizer, and ignition and ran across the anti-theft bolts. Used the chisel and it did the trick. Thanks again!
@ryanaustin-11
4 жыл бұрын
DreysGarage Hey man I’m doing the same thing to a 2005 Honda Accord I had a question though as long as I get the right immobilizer and computer part numbers from a wrecked car to match my part numbers on my car it will work right?
Thanks for the video. I wish you would have shown the actual work from beginning to end including accessing the steering column and installing the new ignition. I have never done this before and need all the help I can get.
Hi George. Really like your videos! The scan tool in your link is no longer available. Can you recommend an alternative or update the link please? Thank you and keep up the videos!
Ty so much I almost gave up on my Honda Accord it hurts first car paid cash no payment. I replaced everything you name it fan radiator belts alternator everything that you can imagine spark plugs in the last thing that my car needed was this and I'm like s***. Ty so much brother . Crying and smiling. .
right on george.you didnt have to share this with us.much respect and wish great happiness and wealth to you and yours🙏
Can you tell me where to get that X431 scan tool and approximately hie much it is gonna cost
Thank You for your tutorial it was very helpful and at this time it’s seems like am going through the same problem,
GREAT VIDEO.... you explained everything clearly and it's very helpful to me ....thanks G Melnik
another simple fix for the honda ignition problem that will also save you a couple hundred on the ignition as well as another 150ish from getting a key cut and programmed is to pull the hold ignition out and take out the actual lock cylinder and pull all the tumblers and springs out then reassemble. Any key or screw driver could now be used to turn the car over but you still need the chip key for it to start so its essentially just as secure as before just cheaper to do.
@darcyzwicker4680
4 жыл бұрын
did that but key still flashes on dash...
@sleepy-xw5kz
2 жыл бұрын
I just got a new lock cylinder will that fix the problem or will I need to do everything in the video ?
Thanks George, this was really helpful.
Same thing happened to me with a 2005 Accord ex v6 I bought with 300,000.miles i thought I was going to hotwire it after this happened,but I got ahead of myself and destroyed my antenna ring between the key cylinder and immobilizer.by trying to bust the lock cylinder out with a screwdriver. your video was resource ful on what to do after getting new switch and keys.however,I need the obd launch device /and the link on where to download app to phone.
Same thing happened to me. I just pulled out the key ignition switch mechanism. Disassembled it with key In the ignition. A small pin needs to be removed to remove the cylinoid. Any pin sticking up is what causes it to get stuck. Remove the pin and tiny spring and voila. There is a KZread video on repairing the Honda ignition switch. Just take out the bad pins save 500 to 800 bucks.
@jayciejaybee7872
7 жыл бұрын
Tech LX ^^^^this^^^^^
@scottyscotty77777
6 жыл бұрын
How do you disassemble the cylinder? You can slide the cylinder out with the key in, by removing a small pin? Is this on the ring around the cylinder? You then take the cylinder apart and pull some of the pins or wafers in the lock cylinder? Thanks
@lokeishasisco8002
5 жыл бұрын
Martin Lawrence
You should also mention to be sure that before you finally tighten the two break-off bolts that you have the assembly centered just right so the bottom latch goes up to lock the steering wheel. You will have to wiggle the assembly until the latch slips into the slot in the bottom of the steering column.
I'm just had to replace all this in a 03 Odyssey. Replaces all the parts and the car wouldn't start so I left the key in the on position unplugged the new one and plugged in my old immobilizer with the old key in the lope and that didn't work either so I went ahead and plugged the new one back in to call it a day but first gave it another start and the damn van started right up and has been running ever since. Oh the part I left out is I used my old original key in the new ignition self because I got it from pick and pull without a key so I just took out some of the Wafers so my old key would still work but again I still did use the new immobilizer... I haven't seen any other video showing this but it for sure works and it all happened by an accident to me. One more thing and I'm not sure if it had any thing to do with it but I had the van battery disconnect overnight.
Great Video man... 2024... Just Got a 2024 Launch X431 Immo Elite Pro and send for the generic ignition lock at amazon after much research. Got the ignition lock installed it then realize the replacement has inly 2 Connections: The brown and the green every where in amazon and ebay these ignition lock assemblies are being sold but the problem is the OEM Has 3 connections: A Brown one a Green one and a White one, as shown in this video... But every seller says its compatible from 2007 to 2011 and they all have 2... Even Rock Auto is selling for $400+ a switch for the 2008 CRV with only 2 plugs.... I just came back to your video to see if you had two or three plugs, and sure enough you have 3... Worlds gone mad... Great Video life saver... Now off to hunt for the all illusive 3 Connector Ignition lock assembly...
This is for the people that are reading through the comments to find details and extra opinions on this issue..I have a 2006 honda accord. 260000 original miles on it..and this just happened to me. My car is old had a few oil leaks needs alot of suspension work and I'm deciding to buy a new vehicle. However I want to keep it and drive it until I save enough money for down payment... in my case with this. Um.. so if you leave the key In the ignition after you start it and turn it off. It will continue to turn back on.. if you take the key back out that's when the trouble begins again..so for anyone out there that is struggling like me and just needs to get buy through a few paychecks..leave your key in the ignition..and use your extra key to lock and unlock the doors. Yes you take a chance on your car being broken into. Yes it can be dangerous. But this for a couple months is going to save me alot of money and stress. Thank you so much for your video. I am a woman and may attempt to fix the ignition myself because of your video! Thank u so much! KZread really is amazing.
Been looking for something like this! Thx.
hi George thank you so much for this video. quick question will these steps work for a 2003 Honda civic , including reprogramming the new keys? I hope to hear from you soon
On 2013 -2017 Honda Accords (9th Gen) The 2 bolts tight opposite to the usual righty tighty, lefty loosy. I learned the hard way trying to pry them out the normal way. 🤣🤣🤣👍
Very helpful video!!Cheers, Jeff from Southgate Lock in maple heights
Did this to a 2011 honda pilot. Once I rebuilt the ignition switch, the switch worked fine in cylinder housing but once inside the housing it would not turn. Seems the steering wheel locked so I had to remove the brace to place it in unlock position. Then placed ignition cylinder in housing without releasing them slightly in acc position to keep wheel from turning
Excellent informative and much respect to your knowledge sharing
HEY GUY, THANKS, THANKS YOU HELP ME A LOT BY USING THE CHISEL TO REMOVE THE SHEER BOLTS.
Cool George! , I did one today. anyone could fix lock barrel just discard the wafers that jam tha barrel and use same key . Make sure you take out the small spring s as well. No need for diag tools . The mechanical locks are basically obsolete in modern car as the key reader is the main security .
@aberakadabra1285
7 жыл бұрын
How we do it in Straya !
@charliemac04
7 жыл бұрын
Abe Rakadabra what are the wafers! I can't start my car
@aberakadabra1285
7 жыл бұрын
Charlie Mac inside the lock there are small parts that move up & down as you insert the key . To access these parts you hav2 1st take the lock barrel out of the car 2 pull the lock apart . All locks are different depending on the brand of car. If you are talking about a honda jazz it isn't too difficult.
@peterock42
6 ай бұрын
I did all that to my Honda but accidently took off the wire to my immobilizer ring when I was taking the screws off I have new one to replace it but would it work and do I need to program it again if I'm installing a new immobilizer ring to my old lock ?
Hey thank for the video, would X431it work with a Honda 2002 CRV, & BMW 03
8 years late but my 2009 accord is having the same problem ignition wore out and I’m so happy I know how to get it fixed 😂
Thank you so much for the descriptive video! I just used this as reference to swap the ignition lock cylinder on my 2009 Honda Civic. Thank you for helping me save $400, George!
@marcellosandoval2974
4 жыл бұрын
can you used a common scanner ?
Your the best I see so for Thanks a lot for the info
Hi George, thanks for sharing the video and it's very descriptive. Will this work for ignition lock replacement on 2009mdx Thanks
TENGO EL MISMO PROBLEMA CON UN HONDA CIVIC .AHORITA MI LLAVE ES UN DESARMADOR,MUCHISIMAS GRACIAS POR SU INFORMACION ,AHORA YA TENGO IDEA COMO CONSEGUIR LA PARTE Y TRATAR POR MI MISMO PROGRAMARLA
I have Honda Jazz. Key fails to turn every single time. I then looked across 3 sites and read about a guy who put his key in 4 or 5mm only. Turn it clockwise about 1/8th of a turn, BUT WHILE keeping the clockwise torque on it push it on in. Car starts every time, but only when I do this. Thanks (whoever posted this advice).
You can pull your lock apart and remove broke pins and just put back in the car it works great only trouble is a person needs a really small extractor or to just drill a roll pin out I then tapped the hole and put a set screw in to take its place works just like new and way cheaper
Good video I have a question a locksmith told to make sure to switch the front ring from the old ignition to the new is that true
worked out great , Thanks
Hello Can you share the link to buy the obd2 you have ? I look for it but i can"t find it
Hi George, thanks for the useful tool you share on this video. Does it work on Honda odyssey 2003 as well? can't see the link, is anybody can help?
Thanks george can I use this on a 2005 Honda Odyssey same steps also is their a good website for parts other than honda to order switch
If you could update the info for the OBD2 programmer will be perfect!!
Kind thanks sir, very helpful vid. Have a great day !!
great video I will try it and let you'll know how it went
Great Instructions. Took me a little over an hour but I'm not very mechanical
Great Job !!God Bless.
Have you tried immobilizer key reprogramming on Acura's? My 2007 TL won't start and I might be replacing the steering lock assembly.
Great video. Is it possible to do this exact same thing to a 2006 Honda Ridgeline.
Thanks. Someone tried to steal my car and damaged the cylinder. So my key would not work. Took me 3 days and some help from my neighbor but now I know even more about my car and I don't have a huge car payment. 239000 on 2007 Honda Accord EX.
Hi great video. Please i have a voltwagen cc 2.0t year 2010 i replaced the ecu engine computer ECM with the same part number but start blocked by immobilizer can i change the initiation immobilizer key to make the car start again.
In case that i install new ignition system .. can i keep the old key detector and just take off the sensor for old key and put in the new key??just to avoid the new reprogram the computer???
@andrethegreat1386
Жыл бұрын
I've seen a video on how to do that
Thanks so much ,you saved the day !!!
Do I need to have that plug or just with the app I should be good ? I have a 2001 Honda Oddysey
Great video. Im about to do this to my 06 accord. But the link for the scanner has expired. Can you recommend another scanner? Thanks
@TheLeprechaun1428
4 жыл бұрын
Seconded. Any more details about the scan tool itself so we can search for it would be great.
I went to the Amazon link listed above and it says part no longer in stock. Do you have more information on this part. Or others that will allow T replace/reprogram ignition for 2005 Honda Civic. Thank you
Hi George I was wondering if it works for Honda accord 2003 ?
What’s the next best code reader to use if you can not find the one shown?
I have an accord 06 and lately and I noticed that the ignition heats up and this causes the key to warm up too. Will you have any advice
I replaced the steering column in my 1989 Pontiac Grand Am with another steering column when I got it all put back in my shifter between the seats wouldn't move. I can't push the button, think I hooked up something wrong maybe the piece on the steering column. It's not my brake switch my tail lights work. Has something to do with the key?
Thank you for your video.
Do you have a video on a 1998-1999 300m,Intrepid or Concorde changing the whole ignition system?
Hello George. I have a Honda Pilot EX-L. I went to Amazon, and it said that the items are unavailable. Is there any updated information, or items? GD
Hi George, thanks for the very impressive and useful video. The Launch adapter of the link is currently unavailable. Can you please give a link of a similar device that are available on US market. Thanks again.
@imranusmani8447
7 жыл бұрын
hay
@berniceerhardt5146
5 жыл бұрын
Mohammad Hasan how to change iBooks
Hay man I was wondering if I do the got that tool to program. (just not in the budget) would I be able to possibly just switch the immobilizers and replace them onto the new one.. I got my old let just won't turn the lobes are damaged so I need new ignition baiscly .. if i switch imoblizers it would work with new keys no? or still needa program ..
hi gorge if i get a used switch with the key do you know if i have to program the keys..? yes right..?
Do you know if accord 98 has the immobilizer and if I have to program the keys ? I'm about to change it brand new
so my original key will be the only key able to open my door? becuz my car has a custom lock control and it doesnt work for the driver lock i have to open that one manually so does this mean id have to carry it around just to unlock the drivers door? or would the new key work aswell?
Well done. Thank you!!
Any resolution for Honda Accords and Civics in earlier models years? 1998-2002? Thank you and you have a very well made and informative posting.
does the new ignition need to be programmed to car its a new ignition with a new immobilizer the car won't recognize it ??
i bought them from my local Honda dealership. ignition lock comes with new keys. I posted a link where you can buy identical part on Amazon for a lot less
@arniegarrison7705
7 жыл бұрын
george can i swap the code ant. ring on new ingition with 2 keys with my old ring and take the chip from old key and glue it on out side of key switch to make it work
@marctorr5551
7 жыл бұрын
Saw this on another video, I plan to try this if the cheaper scanner will not work.
@Spex805
7 жыл бұрын
Marcos Torres did it work?
@Spex805
7 жыл бұрын
Arnie Garrison Did it work?
@of10bad
7 жыл бұрын
Hello George, I have followed all the steps in the video. I purchased a Launch X-431 Bluetooth connector and downloaded the Honda software for the $39.99 (android app). I paired the Launch x431 to my app and when i did the diagnostic, first i noticed the VIN was missing from the vehicle (2004 Honda Pilot) information. 2nd When i followed to look for the immobilizer option it was not detected (even though the vehicle is equipped). Can you please assist? would you happened to know why the option is not available. Its almost impossible to contact Launch Customer support since they're in China.... Any help is greatly appreciated.
Thanks very helpful . Appreciate it
Thanks George! shout out from Strongsville
@olatunjiowolabi9254
4 жыл бұрын
Is anyone know hw can download d app?
Great Video. A buddy of mine got charged over $1k to do this job. The only thing that scares me about doing it myself is the reprogramming. I've got a 2008 Odyssey. I'm hoping it's as easy as you made it look.
@themasterfullmisfit5392
2 жыл бұрын
My Honda dealership tried charging me 1,400 too do this job. I was in shock stupid price for this job.
@travisc254
Жыл бұрын
How did this go for you ?
@exchaoordo
Жыл бұрын
@@travisc254 I didn't end up needing to reprogram or anything, so I only did the easy part, I guess.
George Great video, don't the same process applies to acura mdx, please let me know.
I replaced the ignition module in a 2003 with a used unit out of a 2005. I didn't have time to get the communication dongle as I needed the car so I was forced to take it to the dealer to get reprogrammed. You did the reprogram in 4 minutes. The dealer charged me 1 hour claiming they had to update the vehicle software to the ECM. I don't know if that had anything to do with the different years? I can't see that taking 1 hour as I can update my computer software in minutes. I don't mind paying for a fair service but I don't like getting f'ed. Is there any circumstance where an hour is warranted? I doubt it but I'd like your opinion.
Great video thanks for posting, did you use old immobilizer ring or did you program new one ?
What about unplugging the green immobilizer plug? Leave it disconnected, until you can do all this other stuff. I could be wrong, but I saw that technique work in another KZread video 🤷🏽♂️
So do they have to keep the old key to open the doors and trunk and new keys just for the ignition ?
Need advise, please. My husband just installed the new ignition that came with keys. But the keys will not turn at all. Therefore, no lit dash. He was told we have to get a locksmith to come and unlock it. Ideas?
Hi George will this procedure work for my 2003 Honda Pilot?
Also is X431 IDiag app on your PHONE will work with any ODB2 ???? Please explain because we do not have same tool similar to what you use in the video. Can anybody explain that aspect to educate others please Thanks
I have 2004 honda civic the problem I'm having is when I turn the ignition to the on position the lights on the dash wont come on but everything turns on like my headlights so I'm wondering if that could be a ignition problem.
Would the smart key be able to go into the ignition and turn if it is not connected to the steering wheel??
Is it possible I buy an ignition lock cylinder for my 2006 Honda Civic LX and just take the old chip from the old key and place it in the slot in the new key without having to do any reprogramming ?
when you buy this does it come with already cut keys? if not how do i get uncut keys cut? The link doesn't work for 04 Honda accords. also can I buy a regular launch obd 2 and just buy the software to program the keys from the launch app?
hi brother i have a problem with my golf velocity lost the key than replaced the ignition but but still my car cant start.so i need help what do you think the problem is.and this new ignition i dont know if theres a chip in this ke.
Good job, thank you.What the name of your scanner? When I go on that link you posted I cannot find just the wireless adapter (does it come by it self or other tools, is it part of a more expensive tool)I do see the wireless adapter & you are using your phone with an app; can you please reply ASAP, I’m my car is an 2008 Honda Accord
Quick question, at minute 6.04 the beeping noise for when the key is in the ignition is going off, but the key isn't in it. How did you fix that? I am having that issue
How would I go about doing the same procedure for 2003 Honda accord. Thank you and advance for your cooperation
My sheer bolts would not come out or turn on my ‘06 CRV. I found out that you can leave them alone and by unscrewing the plastic around the ignition cylinder you can access the pin. The pin holding the lock cylinder to the housing did not want to come out... I drilled 2 holes (one hole in front and one behind the pin) and when all else failed I used a grinder to grind down a pair of needle nose pliers to fit. After many attempts the pen finally was pulled free. What I found out in the process is that you can drill one hole to the right of the pen toward the and then go ahead and drill another hole another hole to the right of that hole and slide remove the lock cylinder with the pen still in the cylinder. Makes it quick and easy. Reason being is that you do not need to use the pen when placing the lock cylinder back. As the cylinder will be held in with the plastic when the 4 screws are placed back and work perfectly... I bought a replacement lock cylinder (with 2 keys) off of Amazon for $18. It worked great. Before I used it, I tried the method in some videos of removing and pulling whatever pen was stuck in the out position and reusing the same cylinder. However I had no luck with that, at all. I’d say try that first cannot hurt, might have better luck. Also I’d say if you can use a chisel or dremel and remove the sheer pens easily then go for it. If you can drill one hole and remove the pin holding the lock cylinder, then try it. Or you can just not fool with any of that drill the holes needed to slide the cylinder out and fix or replace the cylinder and slide it all back in, try the key and then replace the plastic and go on with your day. (At least this is my experience with my CRV). I thought I needed the locking pen (so I took extra time to remove it (just in case), but when I was able to replace the cylinder without reinstalling and have everything work perfectly fine (as if it was installed) I wanted to spread the word. Lastly always best to disconnect the negative battery terminal as you do not want to trigger the airbag by pulling out a connector. Peace. :)
I Ordered a new ignition assembly and so far have not be able to program the keys because no signal from the Key ring antenna. Everyone is saying you need to use the original off the old assembly. Have you had this problem as well ?
Hi George, I am about to attempt to replace my ignition lock using your video as a guide. I was not able to get a new ignition lock from HONDA like the one in this video, but I am thinking of going to a salvage location and removing one from a a vehicle. question , if the ignition lock comes from the same year and model vehicle , should everything in this video work as shown?
@angelogcs77
2 жыл бұрын
How did it go? I removed the switch and took it to the locksmith. $100.00 fixed it. Just hoping it will last.
George did you say a locksmith can cut the new cylinder to fit the old keys...then I would not have to program any new keys, right?? Thanks...btw where are you located??
Any advice for a 1995? Got the new ignition installed. Car will start if I unplug battery then plug back up. Then once I turn off car again it wont start and have to unplug and re-plug up battery again to start. Im assuming this just resets the computer temporarily long enough to start the car.
Hi George, I have a 2003 Honda Pilot, will this video for the Accord be pretty much the same as it would be for a Pilot ?
@dreazombie3639
4 жыл бұрын
Im replying for others that may see this because im sure youve fixed it by now but i used this video to fix my 2003 honda pilot and it worked.
@CarlosFlores-cl5qv
4 жыл бұрын
@@dreazombie3639 I have a question will it work if is a used part?
Good video George
Excellent Video Wooo Thank you Buddy
Hi George, I bought this X431 EasyDial , BUT I got to WORK only Ford car, I do not know if I need to buy another software to user in Camary ,Hond and Nissan cars. Please answer this questiona, Please!
man i have to test that in my odyssey 2006,supposed to work cuz it is honda right? if work you just save my christmas,God bless you,thx