Superb video. None of the unnecessary chat. Straight to the point and easy to follow. Keep up the good work

this is the first time I've watched a video by you and you explained it really well. And you saved me some money too. Top man! I'm donating £5 but only for the celebration dance which I'm now going to do after every DIY success! Thank you!

@Stucrompton1

4 жыл бұрын

Thanks buddy got the £5

Thanks Stu …had a couple of sofas delivered today and no way were they going in through the conventional way …. So watched the video And knocked out and refitted a 2100 x 1200 unit ( 45 kilo ? )in about 10 minutes … job done ! I owe you a beer 🙂

Just a little tip, I found it easier, in cold weather, to use a hair drier to soften the beads before trying to remove them. Sorry if that's common knowledge, I live in a bubble🤣

@internationalimmigrant2100

10 ай бұрын

Thanks for the tip

Blokes like you have saved me a fortune. Much appreciated mate.

looks so easy !! mine must be super glued in !! Ive been hammering a sharp chisel in, a tool the same as yours and it just wont open up !! I really dont want to pay a local company over £400 for two small units I can source myself for £96!!

@pillargauss

Жыл бұрын

My ones were also very tight. And it's even worse, this side was installed outwards (not easily accessible from the room)

Excellent, how all youtube videos sould be, simple to follow and straight to the point.

Thanks for this great video Stuart. This gave me the confidence to replace 9 units in our windows. Mine didn't come out so easy since the rubber was stuck to the glass. Used silicone spray and a flexible table knife to break the seal. I also needed to use a mallet since the beading was firmly clipped in. There were a couple of areas where I'd left a nick in the edge of the frame/beading. I used fine glass paper to remove the burrs. Thanks again.

brilliant instructions, straight forward no-nonsense video, more please!

Made the procedure look easy and advice was very clear.

Absolute legend, saved me a fortune. Cheers Stu!!

This is wired I had to change my garage window glass today and then this pops up Thanks stu very detailed vid keep up the good work

Mate, you is an absolute legend. Keep up the good work.

nice of you, to work so i can relax and watch :)

Excellent tutorials with a nice bit of humour as well.

Thanks for the video, saving people a fortune.

Hi Stuart, Have watched the video, and saved my life, (better than what I thought,) All the best Brian 😃

Thanks for sharing, great video & love your work!

Well done mate. Great stuff

Ace video, good clear and concise presentation, You Tube at it's best! Thanks for sharing the knowledge Stu. A charity donation in your name and may the favour bank pay you in other ways. Take care

Excellent vid again stu💪👍 Really well explained

@Stucrompton1

6 жыл бұрын

thanks Raz

Thanks for this! Installer put a unit in upside down in a fixed sash with Georgian bars - wife noticed the horizontal bar doesn't align with the opening sash it sits next to in the window! Saves calling them out again, cheers!

Excellent Demonstration Thank You

Nice one. It given me confidence now to replace mine now.

Cheers you are a star ⭐️

Great job, awesome video!

I was stuck and U sorted us well done

Thanks very much I just popped my living room window to get settee in 👍

Thank you for sharing, that's a great job done!

Great work, thanks for sharing.

Nice one mate👍 Great video

Hi Stu what screws do you use to fix the window to the wall. sorry in advance if this is a silly Question.

Great video thanks! Is it the same process if the glass is in the opening window?

Stu another great vidKeep em going

@Stucrompton1

6 жыл бұрын

cheers buddy

Excellent stuff professional gr8 video

Nice one ! Thanks for the vid

Cheers fella easiest process I've seen and now reckon with time I can get my little upvc window finally sorted

Very good vid. No waffle ... love it. Thankyou, even if I am from Yorkshire :)

Great! just what I needed :)

Fantastic video, thanks Stuart. I have the same type of window( internally beaded), I have noticed the external rubber gasket seal on the outside of window is starting to become rather brittle. Is it possible to replace the rubber seal gasket without removing the window from the frame? Any help would be appreciated.

What a guy! Thank you

Great, very helpful.

What arwe those blue pieces underneath the bottom of the panel? Are they located somehow locqated in the frame?

Thanks you great video very informative 👍👍👍👍👍

Man got moves!

I am looking to replace the glass with framed window can you advise where to look. So basically I have same window as yours but I am looking to install 2 windows in that space. cheers

Hi. Doesn't the window sit on the packers to give it a lift or are the packers square to the frame?

Good video buddy just changed broken window due to your video

How do you measure the glass replacement?

Magic😉 justvwhat I needed to know I've scavenged a few old windows to make a mini green house/cold frame

Thank you♥️♥️✌️

Stu, get yourself a "Moon Knife" it's every glaziers favourite weapon, I have a Wurth one, around £19 on EBay, it's a crag rest bit of kit, you can get them cheaper if you shop around or you might find them in your local trade tool shop! Thanks for another cracking video Fella

@Stucrompton1

6 жыл бұрын

+TheAudiostud we've had one of them they're bloody deadly mate I will stick to bladed edge palet knife 😁

Good job mate 👍🏻

@Stucrompton1

6 жыл бұрын

cheers david mate

Thanks mate

Nice job

@Stucrompton1

6 жыл бұрын

thankyou :)

You are a star👍

NICE ONE 👌 Stu

@Stucrompton1

6 жыл бұрын

cheers buddy

much appreciated mate,done a job for me mutter cool dance! at end lol

How you just did it is how I do it, but when I went to pick up a second hand window for my shed the seller (a window fitter) stopped me from doing it that way and removed the rubber strip from the front so no pressure on glass the the trim came straight out easy!! Only thing is I don't know the rubber bit goes back in? Can you help? Do you have a vid for that?

Thanks mate.

I really needed some help with this, because I blew today I similar window to a door and I stay to a rent house, I need to replace this window before the owner of the house will find out. Usually, when I go to a window store, they can cut me the window to measures I need?

I've got about 5 blown panels in my house. How do i measure up for replacements? Do i need to take them out and measure or do i just measure up to the outside edge of the beading?

Stu, can i use this as a guide on my website?

thanks

Keep the knife flat when getting in between bead otherwise you will damage them using the corner of the knife

Where can u get a replacement beads for a double glazed window

NO WAY!!! No bloody way it is this easy?!? Do you need to replace any seals around the glass too?

Stu, have you and KC done a video on heel and toeing windows?, as cant find a decent one on here!

@Stucrompton1

5 жыл бұрын

Yes that reminds me I need to edit that one

This guy knows his shit 👏👏

Great video thanks. Wondering how much you think a panel of glass that size (unfrosted) would cost and where to find a glass supplier? And would they deal with a diy-er or only tradesman?

@rs-qt1qg

Жыл бұрын

you can look online for window suppliers, or you can contact some in your local area. They should sell to the general public as this can be done by a competent DIY'er. No-one can tell you the price as there are various factors that determine the price.

Very good video i thought it would involve screws and other things

@Stucrompton1

6 жыл бұрын

easier thank you though Karan

Smooth

Top job, cant believe how loose the frame is. Can see it moving when your removing the last run of bead.

@Stucrompton1

6 жыл бұрын

i know crazy right

Where did you get your knife from mate?

hi, i have 2 missed up panes where do i measure from for the new panes of glass, so i dont have to take them out first cheers

@philipashton1443

3 жыл бұрын

I have the same issue.

@mojothedeadman

3 жыл бұрын

measure from bead line in milometers (mm) to the opposite side bead line (that's the edge of the bead that meets the frame edge) then take of 10mm from your measurement, that will give you the glass size you need.

Looks easy 😆

Whats the issue if water is slightly seeping out of the internal beading?

can you tell me a website in the UK where i can buy a single glass insert, please?

Nice!!!!!!

My man

I don’t have beading on all my windows they look sealed does this sound right ??

Awesome

How to clean up old damaged screen PVC on Window panels, thanks

perfect ,,

Looks easy but every thing kooks easy when a professional does it. 😅 thanks for the video want to try this but scared because my windows age huge.

Where can find glass

Hi Stu, mu units don't appear to have beading on the inside (or outside). Looks like the may be bonded at the corners? any ideas on what i could do to exchange the glass?

@paulpatrick2208

4 жыл бұрын

Actually on looking close they are externally beaded. Is it the same process? Looks difficult to get them out?

@mojothedeadman

3 жыл бұрын

@@paulpatrick2208 there will be some internal rubber around the inside of the frame, remove that before you remove your external beading, have a spotter on the other side of the window is always a good idea.

Wow it that how u going on brother

How much does it cost to replace inner broken glass??

My brother had to pay some guy 60 quid to take window pane out so he could get new settee in living room it took him 10 minutes, I'll show him this video next time.

@Stucrompton1

6 жыл бұрын

nice one mark

great video stu ! but you coulda tarted the window up a bit as well .......lol ...cheers mate .

@Stucrompton1

6 жыл бұрын

hahah cheers tart

I'm curious why no mention of replacing the glazing tape? Are you reusing the old or do your windows not have double-sided glazing tape like most all these type windows here in the US?

@micjordan1919

2 жыл бұрын

Internally beaded doent use double sided tape it sits on rolled in rubber gasket

@rupertwilson7020

Жыл бұрын

You are correct: for security and water seal, there should be double-sided glazing tape.. A lot of UK double-glazing was originally fitted as a rushed job, with no effort to seal the gap between window frame and wall, this latter made easier in recent hears by expanding 3M tape and similar.. the old method, using expanding foam, added a lot of time / an extra day visit to the job.. I guess not removing the cover tape from double-sided tape was another way to save a few minutes. Lazy approach.

Can you do this from the outside aswell?

@mojothedeadman

3 жыл бұрын

You'll have rubber gasket around the inside of your window which you will need to remove first before you remove the external bead, its the same principle.

I need a video on how yo remove a UPVc porch

Ive got all the side pieces off but the glass wont come out.. tried everything. Looks like its hammer time.. lol. Damnit..

What was the name of the knife stu?

@Stucrompton1

3 жыл бұрын

palette knife

Hey stu bit late watching this vid but ive got a question if the windows have water in them and its not condensation because you open them every day at least for 15mins how the hell do you deal with it.........how does this happen or is it a big job to do? Would be great if you have an answer or even a vid.

@scorpionnetherrealm8937

4 жыл бұрын

@@Dang_Lin-Wang yeah looks like its in between the glass

@kadermohideen859

4 жыл бұрын

Your units have failed.

What about when there is no beads...?

what if my unit doesn’t have any covers? mines just black

@paulmcfadyen689

5 жыл бұрын

If you mean there are no beads? Check the outside, some older windows are externally beaded. You have to pull out the gasket from the inside, then the beads will loosen on the outside and you follow the same procedure as this video. Then just do it all in reverse to get the glass back in. Need a glazing spoon to get the gasket back in tho.

What can't you do stu?