√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

I’m a broke pool guy who drives a 2001 Nissan Frontier. Thank you for helping me get back to work man

This is an excellent video. I repacked a RWD Pathfinder today. Other videos are way too vague on how much to tighten the bearings. Some cars require a preload, some require some slack. This video tells you how to tighten the bearings (preload) to seat them and then back off and retighten. I think I did exactly this (did not use the inch range torque wrench but I did seat the bearing first. Backed off and 'snugged' the bearing retainer. All went back exactly as removed (the two screws that hold the bearing retainer plate.) A1 has EXCELLENT How-To videos. Thank you for sharing your expertise. We need more people to avoid the 'stealerships' !!!! Tractorman92

@michaelscarbrough5977

2 жыл бұрын

Basically I have a rear-wheel drive Pathfinder and I can't find a video anywhere to do the front wheel bearings never did the front wheel bearings before so I'd like to watch the video before I do it a mechanically inclined enough to do it but still you know torque aspects and stuff like that I need to know these things LOL and the real drive Pathfinder is the same as a 2001 Infiniti QX4 right cuz they both are just spitting image is there any way somebody can blast the video about that

This is cool. Very well explained and easy to follow through. I drive a 99 Nissan QD32 and and am still going for the 18 years now. Keep on the great work James

@TRQ

3 жыл бұрын

+James Tarabu Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

That was perfect! Thanks for your excellent step by step walkthrough!

I went to the shop today for my Nissan pathfinder 2001 cost me $383 to do what you just did plus all the parts and labor

Superb work!! Thank you so much for the walkthrough!!

Good to see someone who knows to do it wright....

@cataobo5080

Жыл бұрын

Right

Very Professional and DIRECT. I am for sure a new SUB and will be reading you. Thanks for what you're doing.

Buen trabajo felicidades gracias por compartir tu experiencia amigo

Great video! Off to the garage i go.

I have worked on this car multiple of times and I can say that this car is the most greasiest car ever.

@konman181

3 жыл бұрын

I drive one, it's true 😂

Very informative video!! Thank you for your amazing videos!!

Other than the torque specification difference you referenced for the Caliper Bracket Mounting Bolts, are there any additional difference for 1997 Nissan Pathfinder 4X4 front wheel bearings? Thank you for another accurate well-presented how-to video, please keep up the good work you are helping a lot of people.

This is a great video thank you

I cant find if you showed it but there are 2 bearings, the inner and outer bearings, that were replace right?

Brilliant video. You have great teaching technique. Really appreciate it. Thank you

@TRQ

5 ай бұрын

+@BarmaBoysAndFamily Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

I wach your video and how profevional you do the job I like the way you explain every move you make very good teacher I have a 1999 pathfinder and need to change the rotor but when I see those old bering I back out now that I saw you foing it I think I going to try the only thing I don't know how to set the to lbs torke Im going to vhang myself see if work thank to you to explain so good.

Wow great video but a lot of work and places where to make mistakes. But great detailed video. I will try to see if I can do the job.

THANK YOU for making the best HOW TO VIDEOS on YOU TUBE !!!

Thank you. I wonder why nobody in any of the Nissan Pathfinder bearing replacement videos ever seem to change the needle bearing inside the stub-axle. That is usually the source of vibration, since it is the one supporting the outer end and CV joint of the axle.

@TRQ

3 жыл бұрын

+Saabjock Thanks for watching our video! 1aau.to/m/Shop-TRQ

@dennislilly2818

Жыл бұрын

Good point, I can't even find an illustration of where it's at.

These bearings require a lot more work compared to the ones on my Silverado but paying $40 for a bearing vs $325 pays for its self even after you buy the tools for it

Merci pour l’aide 👍🏻

Great video. Is the 04 frontier the same ?

Great video

Overall great video and I will be using it for my friend's 2000. However, if you do what he is doing at @:50 seconds you stand a strong chance of sending brake fluid all over the engine and if the hood is up as is so common you may actually put brake fluid on the paint and ruin it. Remove the brake fluid cap and cover with a cloth at the least. At best take a small turkey baster and remove an inch of brake fluid and then put a red mechanics cloth over the brake master cylinder.

@poke2748

Жыл бұрын

Unless someone overfilled the master cylinder there shouldn't be an issue. I've never removed the cap unless it is clearly over filled.

2 thumbs up. Great job.

Great video, sticks to the point and clear. Well done bud, thanks. Is this the same set up as the D22 ?

Great job great video

@TRQ

3 жыл бұрын

+Holden Caulfield Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ

Thank you for the video! Can you please give me the specs for the axle socket? And maybe a part number? Thanks!

I like your job

@TRQ

3 жыл бұрын

+Tools and Projects Thank you! We do too

gostei tenho uma tbm. mande um vidio tirando o cabeçotes q é pra mim aprender

Please do more "how to" videos for the R50 (99-04) model pathfinder. Rear wheel bearing replacement and front swaybar links would be much appreciated.

@jrg6809

4 жыл бұрын

Just did the front sway bar endlink bushings on my 02' Pathfinder and it's pretty easy and straightforward. You'll need a 17mm socket to remove the 2 nuts facing forward and a 3/4" open end wrench behind the nut to keep the end link bolt from turning as you loosen them. Hope that helps.

@on1ytheb3st

4 жыл бұрын

JRG yeah they ended up doing a front sway bar end link video and I’ve tackled it myself already but thanks for the suggestions. You wouldn’t happen to know any sources for rear wheel bearing replacement though?

What grit sandpaper/emory do you use for the race mating surfaces?

So what did you knock off of the wood and into the bearing cavity? Saw dust?

Is their a video for 2wd 2003 frontier

i just did this with my nissan and i have alot of misc parts in the middle to get the spindle nut, i put everything back together and it seems that when the hub cap is on there is some drag, anyone have any suggestions?

Am i missing something? why are the bearings shown in the video different from the ones listed through the link?

Does the kit linked in the description include all the seals and such used in the video?

@TRQ

2 жыл бұрын

+Robert Cowley-Yamamoto Thanks for watching! That link only contains the bearings, we do not have the seals to go along with them at this time.

Can you please tell me where I can find a video that is on a 2001 QX4 to change the front wheel bearings I can't find one nowhere doesn't anybody own one anymore

Looking into this job myself lately and can't you just replace entire hub assembly? More $$ I realize, but maybe less headache? (2004 Pathfinder)

@jrg6809

4 жыл бұрын

I recently wanted to do the same for my 02' Pathfinder but couldn't find any aftermarket hubs. Turns out it's only available OEM from Nissan and $300+ each. Ended up re-using the hub and hardware but replaced inner and outer bearings.

@InTheDogHouse3DPrinting

4 жыл бұрын

You will still need to pack the bearings before you put them in the hubs, so you will be out the extra money for having to do the same thing.

What size of spindle nut socket do you need to put the axle nut back on

@rajah155

4 жыл бұрын

Ryan Hubbard It's a 2.25" two lug axle nut socket, OEM, NAPA and Performance Tool offer it.

Are the inner and out bearings the same part or different

@theonlybucko

4 жыл бұрын

Different

@JaguarDieCast

3 жыл бұрын

A37 is the outter

Where is a good source to get the torque specs?

Can you do the same this but to a nissan hardbody 4x4 pls 😢 🙏 It would help

@TRQ

2 жыл бұрын

+daniel rojas We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

Link for that axle socket?

Could this be applied to a first generation xterra?

@TRQ

3 жыл бұрын

+1men wolfpack This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

HELP PLEASE ...What brand of wheel bearing did you use ? Because I get a national bearing from orellys autoparts and i installed but my wheel still moving shaking a little bit , what I did wrong? Help please

@petertirone7078

3 жыл бұрын

hey...did you PRELOAD the bearings to 60 ft lbs (it's easy if you have the notched tool to do it) and set them/then back them off to 13 ish inch lbs (they do this in the video)...if you don't you can get that result.

@BinhNguyen-ex4zn

Жыл бұрын

@@petertirone7078 Where can one buy or borrow this notched socket?

Will these need to be cleaned and repacked every 30k-50k miles or if done right is this not necessary? Also from what it looks like, if I order the bearings OEM, the race and bearing come as an assembly. Does this mean I will not need to press in the race and bearing separately and instead, as one unit, or will they still be able to come apart and be installed as shown in this video?

@InTheDogHouse3DPrinting

4 жыл бұрын

The bearings and races will be separate. You will still need to press in the races and then pack the bearings but they can be separated. Go to an auto parts store to get the parts because if you go to the dealership you will pay a hefty price for them. You won't want to use the bearings to press in the races as it can destroy both of them, you will need to use a proper tool to install them. I have 216K miles on my 99 Pathfinder, and the bearings just started making noise so when the weather breaks I'm going to pack them. If the races are worn I will just replace them. I have to replace my CV axles as well so I will do it all at once.

@on1ytheb3st

4 жыл бұрын

@@InTheDogHouse3DPrinting I see, that's pretty much the assumption I was under. I'm currently only at around 175k but with my worn suspension, it's put excess wear on the bearings from turns likely. I can hear my front right bearing oscillating when driving and after jacking it up its got a lot of play. My only question is about the parts. I've always thought the OEM quality is the best especially when talking about a crucial part like a wheel bearing.

What size axl socket?

What's the part number for the axle shaft socket you are using?

@robertrob96yount58

3 жыл бұрын

I’m stuck trying to find the same socket. Did you have any luck?

@Dylanhtd

2 жыл бұрын

search for nissan wheel bearing locknut socket

@Dylanhtd

2 жыл бұрын

amzn.to/3uqZH5b

Is the sthe same for a first gen xterra?

@RockYouVideos

3 жыл бұрын

I believe it is. Pretty sure exactly. I'm about to do bearings, pads, rotors and calipers on my 2000 Xterra

Anyone find a link like this but for a 4wd?

Would this work on a 97? R50?

Is it this a common issue? Wondering if it's necessary for me to replace the wheel bearing.

@TRQ

3 жыл бұрын

+Mr. z'd out Thanks for watching our video! This is not as common compared to other vehicles from this generation but if you experience any grinding or whining when you are driving and turning it may be the wheel bearing making that noise. 1aau.to/m/Shop-TRQ

@zmyGe

3 жыл бұрын

@@TRQ thank you! I hear whining from my radio. It drives me nuts. The gas pedal controls the whining noise.

Non hai tolto l'anello del cuscinetto posteriore?

Where can I buy the tool from? (axle socket).

@adilnabbie2612

2 жыл бұрын

Amazon has it

Nissan navara d22 torque says 1.5nm???

Will this also work for a 04 xterra ?

@amybailey8829

3 жыл бұрын

That's what I want to know

@openeyes-411

3 жыл бұрын

Xterra/Frontier almost identical - but for the 4-WD hub cap mounts with hex head socket cap screws instead of nuts. And be careful reinstalling - it has to line up perfectly: DON'T try pulling it home with the hex head screws - you'll feel it sit down right when you do it.😉

👏👏

Where can I get that axle nut socket with two pins??

@TRQ

Жыл бұрын

+Joel Perez Thanks for watching our video! 1aau.to/m/Shop-TRQ

Ningún puto video es mi pregunta

13 inch pounds? That’s mental

Only wished you listed the size of the socket (& a part number for it) used to tighten the spanner nut holding the bearings in place. Other videos show DIYers totally skipping that tool altogether. BIG BIG BIG MISTAKE!!! This task REQUIRES proper tools to seat the bearings and apply the correct torque settings.

@TRQ

2 жыл бұрын

+G. Leet G Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

dont say flat blade screwdriver.

@lanceprzybyla8270

4 жыл бұрын

Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver Flat blade screwdriver

@--EL

4 жыл бұрын

@@lanceprzybyla8270 that phrase only bothered me 2 months ago. Since ive had therapy it no longer triggers me. My therapist says the more they say it to you directly proportionate to how many times they jacked off to their parents having sex growing up.

One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?