How to Replace Front Wheel Bearing and Hub Assembly 2005-2010 Dodge Dakota
Автокөліктер мен көлік құралдары
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00385
This video shows you how to install a new wheel hub and bearing on your 2005-2010 Dodge Dakota. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2005 Dodge Dakota
2006 Dodge Dakota
2007 Dodge Dakota
2008 Dodge Dakota
2009 Dodge Dakota
2010 Dodge Dakota
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obaR/1AXAA00013
• Pry Bar 1aau.to/oMP/1AXAA00020
• 21mm wrench
• 18mm Socket 1aau.to/o8P/1AXAA00043
• 21mm Socket 1aau.to/o8P/1AXAA00043
• 24mm Socket
• 36mm Socket 1aau.to/obH/1AAST00006
• Trim Tool Set 1aau.to/o3v/1AXXX00006
• Pliers
• 1/2 Inch Ratchet 1aau.to/o8P/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oaWo/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obeW/1AXAA00015
• Torque Wrench 1aau.to/oaui/1AXAA00044
• Gloves 1aau.to/oK5/1AXSS00048
• Wire Brush 1aau.to/orf/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 13
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
You made it look easy....Off to the garage !.....20 degrees though Ahhhhhh !!!
Hey thanks for this video. I tried to get the bearing off my Dakota today and gave up. It turns out I wasn't hitting it hard enough.
Is there an abs sensor on the passenger side too? I have an 07 v6 automatic 2wd and it only has an abs sensor on the driver side
Is this the same process for a 2009 Mitsubishi Raider 2X4?
Cant find the steering knuckle anywhere. Anyone know somewhere to buy it.
Iv got a 2005 4x4 slt. It doesn’t have electric lines to the hubs but looking up by vin and speaking to customer service it’s showing parts for the hubs with electric lines / abs wires. Im stumped and ready to buy a whole load of parts. Any ideas ?
I have a 2007 Dodge Dakota and the driver side wheel hub bolts are worn and I need to replace them. Where can I find the 3 bolts?
Great video!
Would it be the same process for a 2wd except without the axle?
@TRQ
10 ай бұрын
+DakGuy05 This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
No grease !?
I can't even get the axle nut off 😭😭