How to Replace Front Sway Bar Links 07-10 Hyundai Elantra
Автокөліктер мен көлік құралдары
Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASFK01636
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 07, 08, 09, 10, Hyundai Elantra
🔧 List of tools used:
• 17mm Wrench 1aau.to/oeR/1AXAA00010
• 17mm Socket 1aau.to/ou3/1AXAA00015
• 18mm Socket 1aau.to/ofS/1AXAA00043
• 21mm Socket 1aau.to/ofS/1AXAA00043
• Locking Pliers 1aau.to/o2/1AXAA00139
• 1/2 Inch Breaker Bar 1aau.to/odh/1AXAA00078
• Ratchet 1aau.to/oAa/1AXAA00016
• Socket Extensions 1aau.to/ou3/1AXAA00015
• Torque Wrench 1aau.to/ohK/1AXAA00044
• Floor Jack 1aau.to/ogA/1AXAA00068
• Jack Stands 1aau.to/ogD/1AXAA00065
For More Info visit us at 1aau.to/h/bHp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 34
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
Great instructions, saved me money doing it myself, thanks!
You're the best, man!!!
@1AAuto
3 жыл бұрын
+Pedra Portuguesa Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@pedraportuguesa7373
3 жыл бұрын
@@1AAuto Thaks!!! I'm watching your videos cause I need to replace my sway bay links in my Kia Optima 2013 by myself but it's kind little nervous with regular tools and I don't trust mine stand jacks. And plus, I don't know how to buy breaker bars with extensions bars..... I'll try it anyway.
Where did you get those vicegrips, and what are they called, I have never seen them before.
Would this be the same for a 2012 Hyundai elantra or is it different?
I want too know what it looks like under my 2007 hyundai accent near the sway bar
What if you have only one side of the car jacked up at the time does that put pressure on the sway bar link that you're trying to remove?
What is the stud bolt size 10MM or 12MM?
What if I just unhook my sway bar and I need to play back what the torque specs I need to put in?
Do they need to be greased upon installation?
Is there a torque spec for these?
How many ooga doogas to properly torque the endlinks?
Acabo de hacer esto a mi Elantra 08 front and rear Detroit Axle brand
Can I replace the sway bar itself from any of the car sides without disassemble any more parts after talking off the links ?
@BMG-JAY
Жыл бұрын
Did you ever find out ?
Do you have a video on the front sway bar bushings?
@1AAuto
4 жыл бұрын
+Ryan Pilkington We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
@bubbarosebush1832
9 ай бұрын
Any front bushing repair yet?
I noticed online that you only sell front sway bar links for the 2012 sedan but you sell a bundle for the wagon. Is there a reason for this?
@1AAuto
3 жыл бұрын
+Corey Stengel Thanks for checking us out! Unfortunately, we do not currently carry the correct rear sway bar links for the sedan design. We're always updating our inventory so please check back soon! If you have any other questions, let us know.
That bottom bolt sounds like a pain in the dick and balls to extract. I have a friend who didn't have an impact gun and he had to hammer away at that thing for hours to get it out.
The Locking Pliers link in the description are not the same then you are using in the video.. Those are in the link are too large to fit.. can you tell me where to get the same Locking Pliers then the video?
@yanuck
3 жыл бұрын
I ended up using a grinder to cut the nuts..
Need alignment after ?
@1AAuto
2 жыл бұрын
+patrick thibodeau No you should not need an alignment done if you are just touching the sway bar link.
Do you need to steering alignment after this ?
@NYRM1974
4 жыл бұрын
YES any time you do shocks.struts, hubs, links, rack and pinion or any front end work get an alignment. Or pay big later on..
@pshluelhk
3 жыл бұрын
No, you need it when you replace tie rods.
Same process for 2011 sonata
Great instruction. Part looks substantially thinner than the stock. Not sure it makes a difference.
@1AAuto
4 жыл бұрын
+UreaSmith Thanks for checking us out! 1AAuto.com
Hyundai has the worst steel wheels.