No video

How to Replace Front Lower Ball Joints 2000-2007 Ford Focus

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
This video shows you how to install new, quality TRQ ball joints on your 2000-2007 Ford Focus. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Pry Bar 1aau.to/o52/1AX...
• 13mm Wrench 1aau.to/o9X/1AX...
• 15mm Wrench 1aau.to/o9X/1AX...
• 13mm Socket 1aau.to/obXT/1A...
• 15mm Socket 1aau.to/obXT/1A...
• 19mm Socket
• Dead Blow Hammer
• T50 Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obAx/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obXT/1A...
• Torque Wrench 1aau.to/oa5f/1A...
• Gloves 1aau.to/oaRM/1A...
• Safety Glasses
• Floor Jack 1aau.to/oarX/1A...
• Jack Stands 1aau.to/oad8/1A...
• Punch
• Small Hook
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 4

  • @TRQ
    @TRQ5 ай бұрын

    √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

  • @PsychoticBedroomRecordings
    @PsychoticBedroomRecordings2 ай бұрын

    Prying out the balljoint with the bar and hook is genius and is a game changer for me. Thanks so much.

  • @qualityreno9689
    @qualityreno9689Ай бұрын

    Great job! By this you have saved yourself the cost of a control arm assembly AND an alignment. Love this channel.

  • @brianwest1501
    @brianwest15014 ай бұрын

    Good job!!