How to Replace Front Brakes 90-00 Honda Civic
Автокөліктер мен көлік құралдары
Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABFS00059
In this video, 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the Honda Civic, years 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, and 00.
🔧 List of tools used:
• Impact Screwdriver 1aau.to/oE/1AXAA00047
• Phillips Head Screwdriver 1aau.to/oame/1AXAA00013
• 12mm Socket 1aau.to/o7v/1AXAA00015
• 17mm Socket 1aau.to/o7v/1AXAA00015
• 19mm Socket 1aau.to/osj/1AXAA00043
• Pipe Wrench
• Ratchet 1aau.to/oanK/1AXAA00016
• Torque Wrench 1aau.to/owf/1AXAA00044
• Bearing Grease
• Brake Parts Cleaner
• Mineral Spirits
• Floor Jack 1aau.to/ouB/1AXAA00068
• Hammer 1aau.to/omx/1AXAA00091
• Jack Stands 1aau.to/ouS/1AXAA00065
• Large C-Clamp
• Wire Brush 1aau.to/oeG/1AXAA00079
For More Info visit us at 1aau.to/h/bmo/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 77
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
First time doing brakes. We have a 1999 civic with 160k miles. I got the same parts kit on the video from 1A for around $60, rotors and all. I couldn't believe how bad the old pads were worn. I had all the tools to do the job and it was easy after watching this tutorial. Thanks 1A Auto. Well done video. I did one side, my 16 year old son with zero mechanical experience or skill did the other side. The job was done with not one unexpected problem. Road test, perfect! Easier than assembling IKEA furniture.
@1AAuto
6 жыл бұрын
+Roger Toth Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
I'm a beginner with car maintenance and so far you guys helped me out a lot! the only thing I'm not doing myself is wiring and timing belts as those are more delicate jobs. luckily I have a friend with the same car as i have and he's a mechanic, so it's extra safe with him checking in aswell. thanks guys at 1a auto!
@1AAuto
7 жыл бұрын
+Zero Fox Media Congratulations on the successful repair. We're glad the video helped you out. For anyone else looking to replace their front brake pads and rotors, 1A Auto offers the parts here: www.1aauto.com/1A/brake-pad-and-rotor-kits/Honda/Civic/1ABFS00059?KZread&CTA%20Comment&ATony
Exactly the video I was looking for. Great explanation, thank you. I'll be changing my brake pads and rotors today on my 2000 Honda Civic.
I just did mine be watching this video step by step. Thank you 1 A auto.
Very profesional record . everything is very clear in the video .
this video literally saved me hundreds of dollars. good looking out 1aauto
@1AAuto
10 жыл бұрын
Thanks for watching. 1aauto.com 888-844-3393
video helped me a lot, thanks guys!!!
Best helpful car repair videos..idk why they havent reached the million subcribers.
Great videos. Thsnks for posting them.
Man you guys always kill it, been a hardcore 1a auto for 6 yeah now (ever since i was 16 and yall helped me on my first brake job)
@1AAuto
5 ай бұрын
+@andrewcarrington2308 Thanks for the feedback!
Great video. Other videos don't show the cleaning with the wire brush, which is very important: brushing off the very fine brake dust is important before putting disc brake grease on. One thing specific to early 90's Honda Civic is the small brake clips. My mechanic replaced my brake pads on my '94 Civic but didn't put new clips on. They were chattering like crazy on any rough and bumpy street and I had to buy a brake hardware kit (O'Reilly had it and Autozone did not). On my 94 there are four clips for each caliper, so if you have a 92'-'95 pay attention to the clips, because each one is different (two pairs but each is a inside or outside clip). Take a picture or keep your old clips to match your new ones because like I just mentioned they are inside/outside and front and back (in other words four clips but each one is specific in placement). Spray disc brake silencer or dab grease on both sides of the clips and spray/grease the slots on the calipers where they snap it to prevent chatter. Grease the backs of the new pads to prevent chatter. Good luck.
@1AAuto
5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Brian O
Great video and well executed. Thanks
@1AAuto
7 жыл бұрын
+Juan Perez Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/brake-pad-and-rotor-kits/Honda/Civic/1ABFS00059?KZread&CTA+Comment&XHRvFUyn-DE
Thank you much. Was a lot of help.
Thank you!
Saved me a lot of $$ thanks
@1AAuto
5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +irregular mana
Quality presentation and clear videography - excellent professional video
@1AAuto
9 жыл бұрын
Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393
Thank You ❤
thanks for uploading
@bozias3861
7 жыл бұрын
1A Auto Parts god bless u
Thanks for the video!! 85 ft/lb for the caliper but nothing specific for the lower caliper slide bolt??
Hi 1A auto, my question is, you need to Open the cap of the break máster cilynder before pressing the caliper piston?
Nice video. No tutorials of a rear disc brake/rotor change? I have disc brakes all the way around on my '94 Civic Coupe.
@1AAuto
7 жыл бұрын
Thanks for watching. They should be similar to the front, you may be able to apply some of the basic steps shown to the rears. We carry some great quality brake pad and rotor kits for your Civic. We offer direct replacements and also cross drilled and slotted kits. Here's a link to them goo.gl/pD8QoV
So I won't have to bleed the brake lines and get the air out? My dad always opened the reservoir to bleed them. Am I able to skip that step like this video did?
good job, good video
@1AAuto
8 жыл бұрын
Glad it helped out! Thanks for checking out our videos. If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/honda-civic-civic-del-sol-crx-brake-pad-and-rotor-kit/i/1abfs00059?KZread&CTA%20Comment&ATony
@severinseraline9875
8 жыл бұрын
Thank
Great video, but rotor screws are japanese screws. They look like phillips heads, but they are different. I had a hard time taking these out until I got the JIS impact/screw driver.
Thanks for the caliper bracket torque specs and the lug nuts? Aren't there any torque specs for the long lower caliper bolt, some people tale the brake hose hold down clamp bolts off and hang the caliper up with a piece of wire so no torque specs for those listed here either, I also thought that the lugs were all torqued to 80 ftlbs on these models. does anyone know where I can find a link to the torque specs on the calper hose brackets, the lower caliper bolt.. (the long one that you have to slide in) and is the torque specs for the lug nuts really 100ftlbs?
great video very helpful
@1AAuto
7 жыл бұрын
+Oscar Prado No problem. Glad to hear it helped you out. For anyone else needing to replace their front brake pads and rotors, 1A Auto offers this set here: www.1aauto.com/1A/brake-pad-and-rotor-kits/Honda/Civic/1ABFS00059?KZread&CTA%20Comment&ATony
What do i do if the caliper guide pin on the bottom doesnt allow me to put the caliper back on? Almost as if they're locked in place
Great! Looks exactly like mine! Let’s swap!🤓
so quick question, don't you have to bleed them?
Hey you said torque the bolts to 85 foot-pounds? isn't that too much?
what can cause my 96 honda civic. driver side caliper to rub against the the inside of the wheel. and it has stock 13 inch wheels I can't figure it out. any feed back will help thanks.
@andrewcaines3840
3 жыл бұрын
most 96 to 2000 civics have 14" or 15" rims
No need to bleed the brake system for this job?
@1AAuto
10 жыл бұрын
You shouldn't have to unless the brakes are really hard or very soft. Hope this helps you out. 1aauto.com 888-844-3393
So theres only one 12mm bolt for caliper
First time im doing my brakes for 1998 honda civic ek hatchback w/ 425k miles
Good video. Wanted to ask you a question. When you install break pads i saw that there is like a metal clip on bottom and under where break pads went. What are those called? Are they necessary? Would it be bad to remove those clips and just add break pads?
@1AAuto
7 жыл бұрын
They help to hold the brake pads in place. They should be reused or replaced. We carry the brake pad and rotor kit shown in this video on our website. Here's a link to them, we also offer free shipping goo.gl/gtF8SL
are there rotor over hub kits for a 96 accord? i don't like the captive set up on my accord. pls help
@1AAuto
7 жыл бұрын
+Tenshi LoveDragon Thank you for checking us out. We do not have any of these kits available at this time. 1aauto.com
@mjf425
7 жыл бұрын
1A Auto Parts you know if you'll get them any time soon?
@1AAuto
7 жыл бұрын
+Tenshi LoveDragon Thank you for the response. We do not have an estimated time, so it is not something we believe will be in the near future. 1aauto.com
they wanna charge me 400 dollars to replace my brakes and rotors, i have some mechanical knoledge but never did brakes, now i can save up the 250 dollars of labour, this is so easy, lol, and i can replace my broken stud in the process
@1AAuto
7 жыл бұрын
+ALEX RH Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/brake-pad-and-rotor-kits/Honda/Civic/1ABFS00059?KZread&CTA+Comment&XHRvFUyn-DE
Do you think the screws that hold the rotors in are really necessary?
@1AAuto
7 жыл бұрын
+Robert Frobisher Thanks for watching! Those screws aren't necessary to install the rotors, it just makes it easier. Once the wheels are tightened down the rotor will be centered! 1aauto.com
@scottjohnson3942
5 жыл бұрын
@@1AAuto thank god. Had to drill them out
do you ship in the philippines?
@1AAuto
4 жыл бұрын
+anjelo tarraya We do not ship out of the US or Canada at this time. Thanks for checking us out! 1AAuto.com
Honda civic lx 97 will it fit?
@1AAuto
3 жыл бұрын
+MitoNation TV The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
That lower slide bolt isn’t screwing in on the passenger side... if I take the caliper off and screw it goes in without a problem like what the hell, I did the drivers side and it worked perfectly
@TeoLujan
11 ай бұрын
Did you ever figure it out?
I can't get the bolts off :(
@1AAuto
10 жыл бұрын
Thank you for watching. You can try getting a lubricant like WD40 or PB blaster. to loosen it up. 1aauto. com 888-844-3393
what could happen if i dont use brake grease?
@1AAuto
10 жыл бұрын
Thank you for watching. A couple things can happen. The pads might not slide easily and cause pre mature or uneven wearing. They could also make loud squealing noises because you are dragging the metal back of the pad across the metal caliper bracket. 1aauto.com 888-844-3393
@envoy3
10 жыл бұрын
1A Auto Parts Thanks for the tips and videos. Did my brakes today in the pouring rain. Unfortunatly i put one of the pads on the wrong side so i had to do it all over again. Works great now!
@1AAuto
10 жыл бұрын
envoy3 Thanks for watching.
What about 1989 civic wagon
@1AAuto
4 жыл бұрын
+wingnut8535 The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
what if the brake pads dont feel like going into place?
@LawnWrangler323
7 жыл бұрын
+1A Auto Parts thanks! got it figured out